• Completekit for testing window components
  
• Has 15 Amp thermal fuse to protect  relay modules
• Plugs into any jumper or cigarette lighter
• Complete with probes, alligator ... 

Auto glass shops have used wire to remove bonded glass ever since manufacturers started "gluing" them in years ago. The TightWire included in this kit is designed to cut out windshields and resists breaking in the process. It is made of ... 

• Remain flexible and retain their sharpness compared to the average cold knife blade
• Blades made in USA
• 5 pack

... 

• Designed for the extra-long dashes found in today's vehicles
• Available in 18" or 24"
• Heavy duty knives have all replaceable parts and a Phillips screw to secure blade tightly
• Made of high quality alumin... 

• 4" Replacement Blade for the Equalizer® GT, Excalibur®, Equalizer® Magnum, Magnum XP, Thor™, Equalizer® 12V, the Equalizer® Freedom and LiveWire™

• 12" Replacement Blade for the Equalizer® GT, Excalibur®, Equalizer® Magnum, Magnum XP, Thor™, Equalizer® 12V, the Equalizer® Freedom and LiveWire™

• 4" Sheath to hold blades for Equalizer Glass Removal kits 3801, 3802 & 3484

• 8" Sheath to hold blades for Equalizer Glass Removal kits 3801, 3802 & 3484

• protective sleeve that surrounds the blade so the blade will not damage the dash or garnish moldings.
• These three sheaths will fit any of the Equalizer® line of tools except the tools that utilize HydroBlade™ te... 

• Also works with Nissan Maxima and many others
• High quality hardened steel construction
• Holds locking tabs open while molding is moved
• Fits Ford F-150 MY 2004 and up

In the auto glass replacement business, time is money and Express tools are the fastest tools in the world to remove auto glass.

• 1-horsepower motor to give it plenty of power to cut the thickest urethane
• Compact en... 

Equalizer LDT204 Express StingRay Windshield Removal / Cut-Out Tool - Standard 120-Volt Kit

Like the legendary Stingray Corvette, Equalizer StingRay w... 

Detect leaks accurately and promptly with the Equalizer® Ultrasonic Leak Detector. Operating this leak detector is simple. Just put the transmitter into the vehicle and run the receiver over the suspected area and find out if there i... 

• Model Specific Wiper Arm Removal Kit has a different puller for each type of vehicle and the puller contacts as much of the arm as possible to spread the removing pressure out over a large area.
• Alfa-Romeo, Audi, BMW, Cit... 

Modern vehicles have tighter tolerances between the glass and the body. This can pose a problem when trying to remove glass with conventional wire tools, leading to damage of the pinchweld or gla... 

The Equalizer Ambush will be an asset to your tool collection because it is specially made to cut through solid urethane. It is appropriate for 'inside use on bonded auto glass parts'. You can also use it on A-pillars for the windshields... 

Compact Design Allows for Easy Access to Tight Areas

The Equalizer Black-Ops is a compact yet powerful lightweight tool that allows easy access to hard-to-reach... 

The BTB system is an all-encompassing system for the removal of glass, mouldings, emblems, and body panels. At the heart of this system is the WK10HD Power Tool. This tool has an exclusive short and fast In-line stroke that absorbs the r... 

Remove glass, mouldings, emblems, and body panels

This proprietary tool has an exclusive short and fast In-line stroke that absorbs the reciprocalcutting actio... 

• Curved sliding handle for a more ergonomic fit and less interference with windshield clearance
• Self Anchoring Tab to minimize need for re-positioning the Python™ Cup Assembly during removal
• Slot for easy lin... 

A Great Auto Glass Repair System for the Beginner or the Professional

This Equalizer auto glass tool kit includes all of the essentials for windshield repair. ... 

Allows you to install a windshield on your own

• No need to waste your time with measurements or precise placement of glass!
• Start on the opposite ... 

Great addition to the Equalizer® Rock Star™ Repair System

• Allows you to do multiple repairs at the same time.
• The injector has a combination vacuum/pre... 

The Fein® Air-Powered SuperCut runs at a maximum speed of 20,000 rpm making it a very fast cutting tool. One unusual thing about the tool is the method that is used to change the blades. Unlike other tools, the Fein® Air-Powered ... 

The Equalizer Sidekick JSS756 allows you to install a windshield on your own!

• The Equalizer Sidekick auto glass installation tool acts as the "other perso... 

• Remove any glass quickly and effortlessly.
• Has the look and feel of a cold knife, but cuts with incredible power.
• Blade moves in a back and forth motion at 22,000 strokes per minute
• As you pull the tool f... 

Heavy-Duty Auto Glass Removal Tool

• Heavy-duty aircraft bearings in all critical points
• Thickened and widened yoke will withstand the extreme stre... 

Equalizer Falcon Heavy-Duty Auto Glass Cut-Out Knife - ESM519

• 20,000 os... 

• Remove any glass quickly and effortlessly.
• Has the look and feel of a cold knife, but cuts with incredible power.
• Blade moves in a back and forth motion at 22,000 strokes per minute
• As you pull the tool... 

Repair automobile windshields the cost-effective way with the Equalizer Rock Star Roadie Windshield Repair Kit!

This Equalizer Rock Star Roadie repair kit for windshields is made in the USA and contains all the tools you n... 

Premium auto glass wire removal system!

As the square wire flat side of the Equalizer windshield cut-out tool is drawn against the urethan... 

Quickly Dry a vehicle with the Equalizer® BLOWHARD™

• 1.3 hp, 120V 8 amp motor that produces an incredible 18,000 ft./min airflow.
• Get a good grip on the... 

Easily converts to an air-powered cold knife! very popular tool in many auto glass shops, these knives cut along flush-mounted, or encapsulated urethane set auto glass.

A powerful motor and supporting ballbearings make it a long-l... 

The Equalizer HST212 Auto Glass Setting Stick allows you to install a windshield by yourself without worrying about setting it properly!

Kit contains:

• (3) "winged" anti-scratch pinchweld blades 1/2", 3/4", and 1".
• (1) wide pinchweld preparation blade ( 1-9/16") for removing the urethane along the bottom of cars with wide urethane.... 

Previously when a vehicle did not have stops, it was difficult for one person to set the windshield because he did not have anything to set it on. But now, with the HoodStop™, you just put the hood all the way down, dry-set the win... 

This is easily solved with the tab repair resin and hardener. To attach a new tab, or reattach the old tab, sand the area lightly to remove oxidation from the old defroster grid. Apply the resin and hardener as per the instructions, at... 

• 40% larger than the ESM911 Vacuum Cups and hold 40% better
• Durometer (measurement of hardness) rating that is softer than other vacuum cups
• The softer durometer allows the vacuum cups to contour better and flatten... 

• 12 glass cutters
• Steel wheel angled at 120º
• Ball end

Ships directly from the manufacturer.
Ships by Ground Only. Next Day & S... 

There are many glasses on the market that cannot be removed without destroying the moulding. Now you can remove and replace those glasses with our Underside Moulding. The ET201 has an adhesive strip that lets you attach it to the bottom ... 

The ET202 is specifically designed to replace these damaged mouldings on quarter and back glasses that haveextremely tight-radius corners. Each spool is 100 feet.

Ships ... 

The ET203 is specifically designed to replace these damaged mouldings on quarter and back glasses that have extremely tight-radius corners. 

• 9/32" wide
• Each spool is 100 feet. 

Rubber Underside Moulding An EPDM rubber undersidemoulding. This mouldings profile can be used in applications with ashallow pinchweld and a wider distance from the edge of the glass.

• 100' spool.

... 

• The trick to keeping all mouldings pliable and easy to work with is to keep them warm.
• holds up to two boxes of moulding or 18+, 20oz. sausage pack urethane tubes
• Heats up to 105ºF
• Plugs into the cig... 

Ideal for installing windshields, side lites and back lites.  

Equalizer's T-Cup Vacuum Cups' ergonomically designed handle provides ease of handling and maximum load control.Attaches to curved or flat surface... 

The Equalizer Milwaukee M18 kit accepts all standard 20 oz sausage style material packages and includes all the necessary components to convert material types from the 264121CT to be able to dispense 20 oz sausage style materia... 

The Equalizer Milwaukee M18 kit accepts all standard 20 oz sausage style material packages and includes all the necessary components to convert material types from the 264121CT to be able to dispense 20 oz sausage style materia... 

• All-metal gears: Deliver industry-leading 950 lbs of dispensing force for the highest viscosity materials
• REDLITHIUM™ Battery Technology: Superior pack construction, electronics, and performance deliver more work per... 

Burco® has established a solid reputation as a manufacturer of high-quality windshield racks. They have also established a reputation for innovation. Burco® Redi Racks™ are constructed of heavy-gauge steel with a highly dur... 

The Equalizer Pop Rivet Setting Tool is a perfect tool for installing almost anything, from door handles to even bumper covers. It comes with five different-sized end caps, including the two most popular sizes. The other three help you w... 

The perfect tool forthose rainy/snowy days when you really need to dry out the area around awindshield or back glass, or heat those mouldings.

• Powerful high-speed motor, a sturdy die cast housing
• Adjustable non-sli... 

Equalizer Heavy-Duty Wide Windshield Stand is made of 1" tubing and designed to last a lifetime. The foam that cradles the glass is a medium-density foam that grabs and holds the glass so it cannot move. This model has an adjustable heig... 

Equalizer Heavy-Duty 3-Drawer Tool Box's external shell is made ofheavy-duty high-impact polypropylene resin with molded-in color. It hasa large top storage area and three durable steel drawers withfull-extension slides that lock when li... 

With this Equalizer Lock Out Kit you can open all of the easy andmost of the difficult vehicles on the market. This kit has beenredesigned and improved since first introduced in 1975 and is in use inhundreds of shops throughout the count... 

These caulking guns are lightweight and can beordered with either an aluminum or clear plastic barrel. Thehigh-thrust ratio allows you to pump the most stubborn urethane. Theentire barrel swivels so the handle is always pointed at you. T... 

Wood'sPowr-Grip Vacuum Cups have a pump built into the end that pulls out the air and sealsthe cup onto the glass. Pump the brass plunger until the red line is hidden and the cupis secure. If the cup loses vacuum the red line appears and... 

• Wood's Powr-Grip Vacuum Cups have a pump built into the end that pulls out the air and seals the cup onto the glass.
• Pump the brass plunger until the red line is hidden and the cup is secure.
• If the cup loses va... 

• The serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster cutting action.
• All... 

• The serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster cutting action.
• All... 

• The serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster cutting action.
• All... 

• These blades will cut urethane cleanly from inside the vehicle and are thinner than most blades on the market. 
• All Equalizer® TimeSaver™ Blades are made of hardened, stainless steel and can be easily resha... 

Designed for curved and small glasses and when working in confined areas.

• Choose smooth or serrated edge
• Sold separately
• 6" Long

• When removing door glasses that are held in place by pop rivets you must drill the rivets out. Before you can drill the rivets out however, you need to remove the rivet stems.
• EasyPunch™ makes that task fast and eas... 

• Equalizer's 18 to 1 Thrust Ratio Caulking Gun offers the perfect blend between underpowered caulking guns from the hardward store and their top of the line super power of a 26 to 1 caulking gun.
• Has a revolving barrel, zi... 

• Protects the dash, bladder, VIN plate
• Made of CLEAR heavy duty flexible plastic which allows you to see what you are working on.
• ... 

Cuts through the hardest of adhesives

• For cutting elastic silicon and acrylic connecting joints as well as for separating insulated glass.
• Extremely sharp edges will cut through the hardest of adhes... 

• Compact size allows you to keep the wire closer to the glass surface.
• Design makes it easy to attach the wire and strong suction cup holds in the toughest of situations.
• Measures 2-1/8" in diameter (the anchor tab... 

Make precise angle cuts into mouldings with MegaRaptor™

This tool works great for cutting mouldings to size but alsoworks perfect for cutting our StopGun™ S... 

• New and Improved Design
• Unlike other pump sprayers, Equalizer's® 1-liter SuperSoaker™ produces more pressure with less pumps, so it takes less work to pressurize the tank
• The SuperSoaker™ utilizes ... 

A pinchweld preparation tool

• Helps you leave 2 mm (1/16") of urethane on the pinchweld just like the manufacturers recommend.
• Use the heel of the blade to control the height at which the blade cuts t... 

Includes:

• SSW508 Squire™ Auto Glass Cut-Out Wire, (1) Roll
• TWH500 TightWire™ Grips, (1) set of two
• WS782 Wirestarter™, (1) tool

• ... 

• (1) roll, SSW508 Squire™ Auto Glass Cut-Out Wire
• (1) pair of LWH200 GripTite™ Wire Gripping Handles
• (1) WS782 Wirestarter™ tool

It has a curing light on the side and a small flashlight in the end. 

This is one of the most versatible blades and can be used for urethane, body shop mouldings, and emblems. 

These blades are designed with a bend and are more flexible which allows them to contour to curved glass.

• 7-1/2" Long
• Flexible Design
• Smooth or Serrated edge, sold seaprately

• All BTB blades are designed to be used with a manual handle.
• Made with a yellow nylon chuck insert.

• To use the Equalizer® wiper arm puller to remove the wiper nut, slide the tool over the arm until the jaws touch the wiper post, then turn the T-handle clockwise until the wiper arm pops from the wiper post. 
• War... 

• Made of stainless steel. 
• Cold knife blades are sharpened, hardened, and then honed to produce a razor sharp blade.
• Made in the USA. 

Grid Repair (0.21 Oz.) for DRK672, Master Defroster Repair Kit. 

Designed with a long reach to follow the curve of the glass where the urethane is located.

• 9-1/2" Long
• Flexible Blades
• Smooth or serrated edge

• Sharpened on both sides, makes it easier for the blade to cut through the center of the urethane if it does not rub against the glass. 
• High-quality stainless steel blades. 
• Fits the Falcon, Raven, and T... 

• One of the nice things the PipeKnife™ XL has is a slot cast into the end of the handle that lets you store extra blades.
• The PipeKnife™ XL is made of cast aluminum, is 18" long and has a flattened blade shaft t... 

• (1) LWH200 GripTite™ handles, pair
• (1) WS782 Wirestarter™ 4' Tube
• (1) TWF164 (164'/50 meters) of TightWire™ Auto Glass Cut-Out Wire

• (1) TWH500 GripTite™ GRIPPING handles, pair
• (1) WS782 Wirestarter™ 4' Tube
• (1) TWF164 (164'/50 meters) of TightWire™ Auto Glass Cut-Out Wire

A short and flexible blade for precise cutting in confined spaces, will follow contour of curved glass. 

• Translucent handle allows the oil level to be seen.
• Each cutter utilizes an end cap with a seal so the oil will not leak from the end of the cutter.
• ... 

• 40% thinner than the regular UltraWiz® blades
• UltraThin blades are designed with an extra space between the blade and the pull handle bolt
• This extra space gives you greater clearance when the glass has a bon... 

Long reach for adhesives that are in difficult to reach places, will follow contour of curved glass. 

• Used to cut across the tops and down the sides of windshield and back glasses.
• Works great around small glasses or in tight areas.
• Will also remove moldings and emblems.

• The PipeKnife™ XL has a slot cast into the end of the handle that lets you store extra blades.
• Made of cast aluminum.
• 18" long with a flattened blade shaft that is 8-1/2" with rounded corners.
• A ste... 

For when the urethane is not far below the dash or in an extremely difficult place to reach. 

• Unique twistable head rotates 90° to point forward.
• The twistable 360° rivet tool will help install problem rivets in hard to reach areas.
• No matter what direction the head is pointing the rivet tool still... 

• Rivet head removal drill bit drills the rivet head off and leaves the steel stem in place.
• Just push the remaining aluminum shank and the rivet stem out and the rivet is released.
• Made of super hardened steel and ... 

• The Equalizer® Venom™ is a wire/cord dispensing device created to be used in conjunction with removal systems such as the Equalizer Viper™, Equalizer Python™ and Equalizer Cobra™.
• Includes (1) r... 

When cutting from the outside, no paint damage should occur if the back of the blade remains smooth & polished.

Available in two styles:

• STANDARD (Yellow) for REGULAR exposed edge glass
• REVERSE (Orange) for... 

• For reaching below dashboards or removing body mouldings and emblems.

For reaching deep below dashboards and working with glasses when the urethane is deep behind an obstruction.

• 14-1/2" Long

Helps technicians move loaded work stands easily, all by themselves.

• Fits square or round, X-Frame type tube stands and holds up to 500 lbs. of component... 

The perfect mid-range caulking gun. Designed to be used with high viscosity urethanes and useful on cold winter days when the urethane becomes colder andharder to pump.

• Equalizer's® is made of Sorbothane®, a viscoelastic polymer, that is less likely to damage the vehicle. So soft you can take the rubber part between your thumb and forefinger and compress it.
• Made in USA.

• These innovative blades have the longest lasting edge available today. 
• Specialized grinding and heat-treating techniques are applied to the production of these high-quality blades to ensure that they maintain a tough... 

Includes:

• SSW165 Squire™ Auto Glass Cut-Out Wire, (1) roll
• LWH200 GripTite™ wire gripping handles, (1) set of two
• WS782 Wirestarter™, (1) tool

To use the grips:

• Unsc... 

• 100% Silicone gel padding in critical palm areas to minimize fatigue and the potential damage associated with power and impact tool use.
• Ironclad's patented gel padding design excels at absorbing vibrations and impact, and... 

• Glass drill bits for use in RDG490 drill.
• Set of 10

• Equalizer® HydroBlades™ have a series of small dimples stamped on the side of the blade that rides against the urethane.
• These dimples are designed to carry cutting lubricant into the urethane that is being cut ... 

Some areas require side-to-side cutting.This is more common around very radical curves in the glass, and in vehiclesthat have corners with a sharper-than-90° angle. It can be difficult to get allthe way up into these corners with a s... 

• Now Serrated For An Even Better Cut
• The blades are very flexible to allow the tool to be held outside the quarter glass opening while cutting inside.
• Each blade is designed for a specific side of the vehicle.
... 

• The Equalizer® Express® Blades can be used on hundreds of different vehicles.
• Perfect for removing glass that is not broken
• Narrow-width design is more flexible
• Blades can also be used with Equa... 

• Arm protectors will protect you from getting cut by these pieces of metal from cutouts in the door.
• Made of durable Kevlar® with a double wall of protection.
• Also will protect you from burns when working aroun... 

This is another solution to the problem of making patterns for heavy equipment. Usually a technician must go out, make a pattern, return with the patterns, cut the glass or have someone cut the glass, and then go back and put it in. With... 

Solder Paste (0.21 Oz.) for DRK672, Master Defroster Repair Kit

Rock Star™ O-Ring Kit

Cutting the proper V-notch on a urethane nozzle can be difficult and dangerous. The Equalizer® Top Notch™ tool takes all the guess work, and danger, out of V-notching the nozzle.

• Features a chrome metal body, tempe... 

• Blades are made of spring steel.
• Serrated style is sharpened with a unique double-serration method. Each serration is also serrated. This sharpening method gives Equalizer® Blades a smoother and faster cutting action t... 

• Many Ford, Lincoln and Mercury original specifications require foam core butyl.
• In recent years it has become almost impossible to find.
• Foam core butyl provides a unique compression recovery capability that butyl... 

• Put one of these expanding hood holders in your tool box and you will never have the problem of holding the hood up again.
• Collapses to 20" in length and will expand up to 47" long.
• Made in USA.

This kit features the most popular and frequently used Equalizer blades for its Falcon™ and Raven™ air tools. Each blade kit comes with four total blades including three Talon™ cold knife blades measuring 3/4", 1", and ... 

• Sealstrip is used to attach a bottom channel to a glass or to form a bond between a metal frame and a glass.
• Made of a black, all-rubber compound.
• Sealstrip has inherent adhesive qualities and conforms to all irre... 

Protecting the pinchweld when removing the glass has always been a problem for technicians. When a protector was placed between the glass and pinchweld the repeated hits by a power tool blade would cause that protector to jump out of th... 

• To use them properly you must have an adhesive pad.
• First put the adhesive pad over the damaged area, then attach the pedestal to the adhesive pad.
• These are disposable items meant to be used only one time and the... 

This is a new spin onthe tried and true design of the original HydroBlade™. The Equalizer®Piranha™ blade uses the same cutting technology as the originalHydroBlade™ but also incorporates serration on a portion of ea... 

Protecting the pinchweld when removing the glass has always been a problem for technicians. Every protector they used could not withstand repeated hits by a power tool blade and would jump out of the pinchweld, leaving the paint exposed ... 

• This tool is strong enough to to separate the mirror from the mounting bracket.
• With the rearview mirror assembly tool you can put them back together in seconds.
• Crimp the metal back around the ball so it is as g... 

• Entire tool is made of hardened steel for durability and long use.
• Each tool contains two sets of interchangeable jaws.

To Use:

• Set the wiper puller arms on the horizontal slide.... 

The Equalizer Foam Installation Tape, Neoprene are commonly known as foam dams; prevents the urethane from squeezing into the vehicle. It also ensures that the urethane is not visible from the inside.The Equalizer Foam Installation Tape,... 

Gold Glass Group Economy mouldings are ofthe highest-quality.

• Channel Mouldings with Butyl 1-1/4"
• Gold Class Group
• 65ft spool

• Breaking a blade can slow you down when you're on the job.
• Now you can change that blade in seconds. Just push the button in the end of this cold knife and it releases the blade.
• Use only blades that are 3/4" wide... 

• Easily pumps out the toughest high-viscosity urethane.
• Caulking gun is lightweight and has an aluminum barrel.
• Entire barrel swivels so the handle is always pointed at you.
• Thrust rods are heat-treated... 

• Rest the mat on top of an automobile is a convenient place to put your tools.
• Protect that paint with an Equalizer® paint protector.
• Made of a thick, soft, soil-proof vinyl, our paint protector will give you y... 

• The serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster cutting action.
• All Equalizer® Blades have the correct Rockwell hardness so they ... 

With the varied designs in today's door panels, clips can be anywhere including locations that are almost impossible to reach. Somevehicles have a door skin made of metal so thin that the traditional rounded clip removaltool may bend the... 

• Exposed Pinchweld Removal Blades solves the problem of scratches during installation.
• UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will no... 

Dispense high-viscosity urethane easily and in biting cold weather conditions with the Equalizer® 26-to-1 X-tra Caulking Gun. The benefit of this 26 to 1 caulking gun is that squeezing the gun handle with 1 pound of pressure will pu... 

Equalizer RMI309 Rear-View Mirror Installation Tool

• Use to install spring-loaded rear-view mirrors with ease
• Spring-loaded rear-view mirrors are designed to detach from the windshield when hit by the air bag... 

• Tab Repair (Combined 0.24 Oz.) for DRK672 for Master Defroster Repair Kit

WARNING: This product contains a chemical known to the State of Cali... 

• Removes door glass safely and effectively on select 2009 (and up) Dodge, GM, Chrysler, Ford, & Jeep vehicles.
• Made of heavy-duty, yet flexible plastic that can be bowed in either direction to accommodate all types of r... 

Fletcher makes high quality glass cutters, right here in the USA. The FT01826 may be the most used glass cutter in the world.

• Steel cutting wheel angled at 130°
• Ball-end
• Sold in a box of 12
... 

• Fein® Part No. 6 39 03 207 01 2
• Cutting part 1" long
• Sharpening 1 side regular, one side serrated
• Package of 2

• Fein® Part No. 6 39 03 208 01 0
• Cutting part 3/4" long
• Sharpening 1 side regular, one side serrated

Fein® Part No. 6 39 03 209 01 4

• Cutting part 1-1/2" long
• Sharpening 1 side regular, one side serrated
• Package of 2

Equalizer's® PryDaddy™ set contains 12 pieces, specially shaped sticks and ahammer for prying, smoothing, spreading, removing, tapping and pushing.This tool set will help you overcome any situation no matter howcomplicated. ... 

• Made of rigid steel, this is a tough tool that will last for years.
• Made to hold ten tubes of urethane and will fit all standard urethane tubes, keeps inventory visible and prevents spilling.
• Made in USA.
... 

• Twist the handle and this knife will extend up to 24" in length. Twist the handle again and collapse the knife down to only 18" long. The twist lock will hold the extended part firmly in position.
• The extension is aluminum... 

• Easily pumps out the toughest high-viscosity urethane.
• High-viscosity urethanes have become a standard in our industry, and this caulking gun has proven that it can pump high-viscosity urethane even on a cold day.
... 

• Protects the dash, bladder, VIN plate
• Made of flexible nylon to fit contours in dashes and into rounded corners.
• Back side is made of durable, non-skid foam pad that both protects the dash and prevents the dash pr... 

Made with a smaller handle - the Quicknife™ SL is 20% smaller than the original BNQ271.

• Quick release cold knife with fully-adjustable blade length!
• Designed so a quick pull of the blade-lockin... 

• Designed so a quick pull of the blade-locking lever releases the blade.
• Put the blade at any depth you want and push the lever back down to lock the blade in place.
• A unique clamping device inside the cold knife... 

One of the most common complaints you hearabout urethane heaters is their size, most of them are too big formobile vehicles where space is at a premium.

• Remove and replace "Swing Out" friction pins.
• Jaws have five adjustable settings that will fit any swing out window.
• Removes the friction pin, open the jaws wide enough for the plier push pin to engage the frictio... 

• On very large Torx® bits you cannot get the leverage with a small ratchet, so we offer the Super Torx® Bit Set which has the appropriate size ratchet drive for the bit. 
• Sizes included in t... 

• This Milwaukee® Caulking Gun delivers the power, speed, and control needed by an Auto Glass Technician.
• A powerful pushing force of 950 pounds dispenses the highest viscosity materials with ease.
• The combinati... 

This Milwaukee® Caulking Gun delivers a powerful pushing force of 950 pounds and dispenses the highest viscosity materials with ease. The combination of variable speed dials and trigger switch along with the Constant Flow Technology ... 

Thiscomprehensive kit designed for the Mobile Auto Glass Professionalcontains a wider range of mostly serrated blades which arepreferred for their faster cutout times. Includes adjustablecutting depth control arms. Safely remove any bond... 

The Equalizer Installation Stick is an easy-to-use tool that is designed to help get the film tucked in behind the gaskets on automobile doors. For more leverage, you can use an equalizer handle.

Key Features of the Equaliz... 

Installation sticks with a chisel point are more versatile than regular installation sticks.

• Use the regular end for all the things you now use a regular installation stick for, and then turn it around and use the chisel end... 

SuperScraper™/Prepmaster™ blades come in three widths: 1/2", 5/8", and 3/4" wide straight blade and 5/8" angled blade. They are made of surgically sharp stainless steel.

• Remove urethane from the pinchweld without damaging the pinchweld wall and encapsulations.
• Comes with one small and one large blade that let you cut narrow or wide grooves. 
• Made in USA.

• Cuts a U-shaped groove for Christmas tree mouldings to be removed and re-installed
• Made in USA.

• Tool handle that is hollowed out in such a way that it will allow a windshield stick to be slipped inside and fastened with a set screw.
• When one end of the stick wears out, just switch ends.
• When the whole stick ... 

• Has a T-15 Torx® for General Motors' rearview mirrors on one end and a T-20 Torx® for Fords on the other end.
• Comes with a pocket clip.
• Made in USA.

... 

• Clip it in your shirt pocket just like a pen and you always have a rearview mirror removal tool handy.
• Two-sided hex wrench fits all domestic cars.
• Made in USA.

Sh... 

• Use this handy tool on the 1995 Ford models with Phillips head screws, or flip it over and use the T-15 Torx® on most domestic models.
• Made in USA.

... 

Aggressive for difficult rust removal

• 1/4" shank, can be mounted to any drill for fast effective rust or debris removal.
• Narrow width allows it t... 

Guide For Saw Blades - this is the guide that controls the saw blade.

• Replacement ball bearings for Lexus' rearview mirrors
• Metric size
• Mirror can not be installed without one, and have a few extra on hand for next time

• Repair any plastic parts damaged during removal.
• Simply put a small drop of Zap-A-Gap™ on the plastic parts and press them back together.
• In a few seconds, the glue is dry and the pieces are bonded.
... 

• Mounted Rust Removal Brush is perfect for minor rust removal
• Measures 4" in diameter and can be attached to your drill/driver or any drill that runs less than 4,500 RPM.
• Width is approximately 1/2" allowing it to ... 

For use with Wire Removals

The Equalizer® Rock Star™ Cleaning Solution is designed to clean the Equalizer Rock Star Injector. Clean the resin from the injector, bridge, and o-rings with this cleaning solution. It keeps these items free and clean of buil... 

• Rubber Setting Blocks made of hard rubber.
• Size is 3/8" x 3/8" x 1"

• Gold's retention tape is designed to perform as a temporary holding mechanism for rubber/plastic mouldings used on automobile glass.
• Designed to temporarily retain the rubber/plastic moulding in the proper position while t... 

• 2.5" x 2.5", used in the repair process.
• Package of 20

The Equalizer Extra Long Utility Knife Blades are longer than standard knife blades and give you a larger exposed cutting area. It is designed to have more length between the two notches.

The Equalizer Extra Long Utility Knife Blad... 

• Keep a stash on hand - keeps glass in place while the urethane cures.
• Fits all GM B-Bodies Rear Windows and is NAGS® number 20173225.

• Sometimes just gluing the part is not enough. You need to build up an excess amount of glue on the surface to give the bond more strength. While Zap-A-Gap™ dries quickly in small amounts, it takes a long time for large amount... 

• For use in the Equalizer® Samurai.
• T-slotted blade allows you to quickly change a blade by pulling forward and down on the blade.
• To put in a new blade, push it into the lower part of the knife, push it up int... 

• Super-strong, weather-resistant adhesive that will glue the moulding together and maintain a strong bond through any type of weather.
• Only takes a small drop to glue the moulding together, so each bottle is enough adhesive... 

• Keep a few sets of these universal channels on hand for repairing a door glass.
• The channels have a small nylon screw that will temporarily hold them in position while the adhesive cures and permanently attaches them to th... 

Equalizer Pinchweld Preparation Tool

Featuring a hardened steel blade and long shank, it is used to keep your hands away from pieces of broken glass when removing urethane and butyl from the pinchweld.

7" with 1.5"... 

• Equalizer has solved the problem of opening a tube of urethane.
• Press the rear of the tube over the serrated circle to remove the rear seal.
• Then turn the tube over and press the front seal into the pointed stem a... 

• Slide the tool left or right under the moulding until it hooks a retaining clip.
• Rock the tool with a twist of the wrist to pull the clip out slightly.
• This releases the moulding from the clip.
• Heat treat... 

• Equalizer's® Speed Stops™ can be used as a permanent stop and will not squeak because they are made of nylon.
• Nylon is slippery, so when you use the stops to support the windshield you can "slide" it across the s... 

• To install the new pads just unbolt the stand, remove the pipe tip and slide the new pad in place.
• Will also fit stands produced by other manufacturers.

• Using Equalizer's® lubricant improves cutting action and reduces drag on the blade.
• Won't damage the dash or headliner.
• Mix at a 16 to 1 ratio (16 parts water to 1 part cutting lubricant) to make 128 ounces of... 

• To prevent contamination from the pinchweld, use a new dauber each time you dip into the primer container
• High quality wool tuft
• Available in packs of 100 or 1,000

Replacement Vacuum Cup for Equalizer®Ricochet™ Pinchweld Protection System (PHV859) or Equalizer® BounceBACK™Pinchweld Protection System (MDP181).

• Keeps corners from lifting.
• Attaches with a vacuum.
• Pressure is applied to each end of the tool by tightening the wing nut and putting upward pressure on the vacuum cup, thereby putting downward pressure on both e... 

• Features the same quick-change collet so you can change blades in seconds.
• Can be used with the 1/2", 5/8", 3/4"-wide and the new 5/8"-wide angled blade (sold separately).
• All of the blades are made of thin sur... 

The Equalizer PN3010RK Quicknife UltraQiz Cold Knife Handle is a replacement pull handle for the following items:

• PN3001K Cold Knife
• 3007K Cold Knife
• BNQ271 Cold Knife
• BQS257 Cold ... 

• Smaller daubers give you more control of where your urethane spreads -- limits over spread onto headliners and drips.
• Measures only 1/2" in diameter.
• Made of a thick wool tuft that is held tightly in the center wi... 

• Close fitting glasses that almost touch the pinchweld have caused a lot of technicians to start using it again.
• TightWire™ is composed of three super-strong, stainless steel wires braided to form one wire, and anodiz... 

• Blades are made of hardened carbon steel and are bent the same way a regular cold knife blade is bent.
• They cut urethane by thrusting forward into the urethane and backwards away from the urethane as you pull the oscillati... 

• These blades are made especially for the Ninja™ tool and designed to withstand the power produced by the back and forth motion of the air tool.
• Made of hardened spring steel.
• Standard Sharpened Blade
... 

Precision™ Mirror Buttons for Ford (Conventional), 10 Pcs.

• Keep a stash on hand - keeps glass in place while the urethane cures.

Fits

• 84-00 Chrysler Minivan
• 81-89 Aries
• 87-95 Le Baron Coupe Convertible NAGS® 3767196

• The telescopic magnet extends to 24" in length to get to those really hard-to-reach places and collapses to only 4-3/4" long to easily store in your toolbox or even fit in your shirt pocket. 
• This powerful magnet can ... 

• Moulding Clips for Honda
• 25 pcs
• NAGS® Reference: FW641/653/680/684/805

• Fits easily down into the recessed area and can be slid under the head of the cowling clip.
• Pull up on the center locking part and the clip can be removed.

Equalizer FMR482 Ford Rearview Mirror Removal Tool

• Removing the rearview mirror from Ford products is no longer a problem
• Simply slide the blade between the mirror bracket and the mirror
• Use a gentl... 

• For mirrors held on by spring clip.
• To remove a rearview mirror that is held in place by a spring clip you need to pry up from under the bottom edge.
• To use: Place it under the bottom edge of the windshield where ... 

• Equalizer's® hook and pick set comes in four different configurations to help you get under and pry up the smallest item.
• The straight pick also works great when you are trying to align small holes.
• Set of 4 t... 

• Equalizer's® Pinchweld Cleaner brush was designed specifically to avoid scratching the surrounding painted surfaces.
• The brush is made with soft "crushed" bristles for contact with the paint, but enough stiffness in ea... 

When a glass is missing in a piece of heavyequipment you must make a pattern. Most rubber gaskets have a 5/16"space between the rubber and the pinchweld. When you draw a pattern youmust then cut the glass 5/16" smaller so it will ... 

• Damage can be done if you're not using the right tool - using screwdrivers or windshield sticks to push the self-locking part of a rubber gasket into the locking channel can ruin your work.
• Curved polished steel will slid... 

• Has a rounded steel ball end, insert down into the rubber gasket it is very difficult for it to come out.
• If it does slip out of the gasket there is less of a chance you will scratch the paint of the vehicle you are workin... 

• For pulling the rubber gasket over the pinchweld on rubber set jobs.
• Made of hardened steel and has a distinctive bent-then-curved end that will help reach over the pinchweld and grab the lip of the rubber easily.
... 

Featuring thin, surgically sharp blades, the Equalizer Super Scraper - SC300 quickly became one of the most common pinchweld preparation tools!

• This sharpening stone is designed to keep your hand away from the item being sharpened. 
• Great for sharpening Equalizer® Blades, cold knife blades, or any other blade you want to put a razor-sharp edge ... 

Equalizer Clip Removal Tool - TPE657

This Equalizer tool fits under the head of small clips and allows removal of cowlings and drip gaskets!

• Leading edges of the clip removal tool are tapered very thin for the tool to easily slide under a clip and prevent damage.
• Working length of the tool is 10-3/4 inches long with overall length of 11-1/2 inches.
• Mad... 

• High-quality blade made of flexible stainless steel - will flex before they break, warming you to back-off and decrease the amount of pressure.
• Flat on one side so they ride against the glass and cut the urethane at... 

• A razor blade is too wide to use across the top or up most A-pillars, but it is ideal to use across the bottom.
• The nice thing about this tool is that you pull out the old blade, put a new one in and you are ready to... 

• Z-Poxy™ is specially formulated to bond plastic, metals, wood, fiberglass, etc. 
• It produces a tough permanent bond in just 5 minutes. 
• It is resistant to shock and solvents, is non-shrinking, and ... 

• Over a period of time the gas lifters that hold up the hood or rear hatch on a vehicle can fail. This small, easy-to-use device solves this problem.
• Open the hood or rear hatch, attach the device to the metal rod on the g... 

• High-quality blade made of flexible stainless steel - will flex before they break, warming you to back-off and decrease the amount of pressure. 
• Flat on one side so they ride against the glass and cut... 

• PN1022 cuts under the moulding around the back edge of the glass and underneath the glass. Its unique shape allows you to remove the glass without removing the moulding.
• After the glass is removed there is very little pre... 

• Slick Eddie™ reduces friction between windshield and rubber base on Burco® winshield racks.
• Made in the USA.

... 

• This wire starter design includes a T-handle.
• T-handle makes it easier to push the wire starter through the urethane easier.
• Made with a stainless steel blade and a plastic injection molded handle that is contoure... 

• 1-1/2 quart pump-style pressure sprayer
• Pressure lasts for days and features a "lock" position on the handle for times when you need to really soak an area
• Plastic nozzle prevents rust or corrosion

• Self-locking rubber gaskets are still used on many pieces of equipment and are used extensively on construction equipment.
• It can be difficult to fold the self-locking rubber into the locking part.
• Locking tool wo... 

• The Short Glass Run Channel Cleaner is perfect for cleaning glass out of the upper channel.
• Measures only 13" long (overall length including handle) with the exposed metal area measuring 8-3/4" long.

• Has a 7-1/2" shank, is made of hardened steel and has the same distinctive bent-then-curved end that will help reach over the pinchweld and grab the lip of the rubber easily.
• Made in USA.

• Equalizer® formulated a towel that contained cleaning agents to remove the urethanes, butyls, greases, and grime that installers come into contact with daily. ... 

• TightWire™ grips hold cut-out wire quickly and securely. 
• They work equally well on solid, square or braided cut-out wire. 
• Each set contains two handles. 
• Made in USA.

• Place the nozzle under the blade to the desired depth, squeeze the handles together and the nozzle is cut.
• Handles can be locked shut with the swivel lock.
• Made with a super-sharp, hardened, steel blade to give ye... 

• Wire gripping handles with quick wire release. grip with a hollowed-out, wedge-shaped shaft is the secret to these unique wire grips. 
• Feed the wire through the hole in the brass wedge shaft, loop it through the hole ... 

The Equalizer Rope Insert Tool is specially formulated for installing locking gaskets on windows and other glass parts of automobiles. It is essential to ease a rope around a glass part, like the window, to correctly place it in the groo... 

• Tools are made of spring steel and are hard enough to hold an edge, but soft enough so they will not dig into the pinchweld.
• Without Neoprene Cover.
• 3/4" Wide Blade

Equalizer® Sabre™ Urethane Cutting Tool - SC532

This Equalizer windshield cut-out tool features a quick-change design that allows you to remove the old blade and put in a new one in ten seconds!

• Z Blades will remain flexible and retain their sharpness much longer than the average cold knife blade. 
• The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance le... 

• For removing windshields, push the sharpened tip through the urethane and the wire stays in place while you remove the wire starter.

• The headliner protector gives you the ability to protect the a-pillar trim and the headliner while using our wire cut out tools.
• It allows the wire to pass over the headliner where it comes in contact with the a-pillar tri... 

• These Mechanic's gloves provide the perfect combination of dexterity, flexibility and durability.
• Low profile glove offers maximum dexterity while also retaining a high level of protection and abrasion resistance.
... 

Removing clips is difficult because theclip presses into a series of "teeth" that hold the clip in place. Works with Toyota/Honda/Infinity/Acura/Subaru vehicles.

• Slide the clip ... 

• With Equalizer's® wiper arm removal tool, you can place the prongs under the arm (use care not to hook the wiper post) then place the pressure bolt over the head of the windshield wiper bolt and screw the pressure bolt do... 

• Removes broken tempered glass from inside curved door, channel felt, behind impact bars, in locks and in the drain area.
• The tempered glass remover is made of spring steel wire. It will flex to fit the contour of the door ... 

The forked end - For use with 2004-2010 Ford F-150 pickups that have bolted in back glasses.

• Designed to straddle the catch on the latch of the rear seat so that the tool will not slip off to one side.
• You then pus... 

• Now you can use any Equalizer® Express™ blade as a long knife just by sliding it into one of our Express™ Blade Handles.
• Handle is made of aluminum and is a full 8-1/2" long (perfect for two handed operatio... 

• Equalizer's® UltraWiz® Cold Knife Blades come in a variety of lengths for all your urethane cutting needs.
• Original Thickness.
• Sharp and durable enough to cut in one pass.

• The UltraWiz® cold knife is shaped for comfort and gripping power.
• The handle is oblong so it will not easily spin in your hand.
• The pull handle is built into the body and not bolted to the blade.
... 

• Same handles as Equalizer's® LWH200, but with a vacuum cup attached on one end of each GripTite™ VC handle. 
• It allows you to pull the wire tight and attach the pull handle to the glass while you move from ... 

• Two double end tips will fit most applications.
• The unique design allows the tip to swivel 90° in either direction to work where others will not.
• Select the tip that most closely fits the locking strip.
... 

• Heavy duty construction.
• Tool has a 1-3/4" opening between the pressure bolt and the prong jaws.
• Entire assembly is made of steel with the prong jaws and upper bolt support being a 1/4" thick with radiused connect... 

• 12" long for those times when you need a shorter knife.
• Heavy-duty knives have all replaceable parts and a Phillips screw so you can secure the blade tightly without stripping the screw.
• Comes with our unique "hid... 

• Curved handle designed to keep your hand away from the glass.
• Swivel the tip 90° in either direction.
• Four different type eyelets will fit most rubber locking strips on the market.

The Equalizer HydroBlade Blade Sharpener is designed to do that quick touch-up that brings the auto glass cutting blade back to a razor-sharp edge!

• Equalizer's® extra long serrated utility knife blades measure 3-3/4" long and give you an exposed cutting area of, at least, 2-1/4" (standard blades only give you 1" of cutting area)
• Designed so there is more length be... 

• Removes belt moulding clips and saves the moulding.

To use the BeltMoulding Remover:

• put it down into the door panel from the top until the hook can be placed under the lower edge of the mo... 

• Metric screws and bolts
• Stainless steel pull cable with fused end flute
• Aluminum pull handle
• 5" Long and comes with one Z4 Blade.

• Honda/Acura makes so many different style clips that a clip tool which will work on one vehicle will not necessarily work on another vehicle.
• Designed to work on a wide range of Honda and Acura vehicles with smaller or na... 

• Equalizer® Self-Pressure Vacuum Cups are made of 100% rubber which provides a certain flexibility that does not exist in other vacuum cups.
• Cup is designed with anti-slip rings so it will not slip out of your hand.... 

• Removes urethane with one pass, especially along the bottom of the windshield.

• Apron features tie straps that are long enough to reach around most installers.
• Keeps your clothes clean while you work.
• Has two pockets to hold anything you need to keep within easy reach.
• Apron is black... 

• Keeps a tight grip so glass won't slip and cut through gloves.
• Seamless knit gloves have a natural rubber coating for excellent wet or dry grip and are made of 7-gauge 100% Kevlar®.
• Kevlar® is one of the m... 

• Press one of these vacuum cups against the glass, squeeze the handle, and a lever pulls the center of the cup up and creates the vacuum.
• The handles are made of high tensile strength aluminum.
• Each cup comes wit... 

The Equalizer KlingOn Rearview Mirror Adhesive Kit can permanently bond an old or new rearview mirror in a matter of minutes. Usually, the rearview mirror bracket buttons lose their adhesive properties due to a combination of humidity an... 

• Triangular wire designed to our specifications especially to cut urethane.
• Made of high-tensile strength stainless steel with each side measuring .85 mm.
• 72ft rolls

• Medium resin (40 cps) is an ideal choice for hot climates and, just like our thin resin, has unparalleled clarity and strength.

• Equalizer® Pit Filler Resin is extremely hard, creating a powerful bond to the glass surface
• Available in 0.5 oz or 1 oz bottles

• Thin resin (10 cps) is ideal for general repairs.
• Wicks extremely fast and produces unparalleled clarity and strength.
• Available in 0.5 or 1 ounce bottles

• Auto Glass Technicians know that UltraWiz® has a reputation for quality cold knives and some of the strongest, sharpest and thinnest cold knife blades in the industry.
• This cold knife combines all you have come to expe... 

• The PipeKnife™ has a slot cast into the end of the handle that lets you store extra blades.
• Made of cast aluminum.
• 14" long with a flattened blade shaft that is 6-1/2" with rounded corners.
• A steel ... 

• Avoid damage to paint when removing excess urethane.
• Anti-scratch pinchweld preparation blades work equally well for removing excess urethane after a windshield removal or for safely removing urethane with shattered temper... 

• High-quality blade made of flexible stainless steel - will flex before they break, warming you to back-off and decrease the amount of pressure.
• Flat on one side so they ride against the glass and cut the urethane at... 

Adjusts from 18" to 24" in Length

• Light weight and has a new blade retaining design that can store an extra blade.
• Adjustable feature allows you ... 

The distinct precision curvature of the Springer Clip Removal Toolprovides a variable load distribution, safely moving the load pointalong the tool as more leverage is applied. The tapered tip allows entryunder closely fitted parts and t... 

• They are disposable pieces of double-faced tape.
• Pull the tape off and place the pad so the damaged area shows through the hole in the center.
• Then place the pedestal over the pad so all holes are aligned and the ... 

The mobile, one-step cleaning solution.

• Pre-moistened, heavy-duty towels with pumice scrubbing power.
• Powerful yet safe cleaning agents work toget... 

• Unit mounts on the wall of your mobile vehicle and contains cans so they don't roll around
• Has 5 slots
• Made of heavy duty plastic

• Tabs
• For Defroster Repair Kit
• Package of 5

• PryBaby™ set contains 5 specially shaped sticks for prying, smoothing, spreading and removing.
• Each tool is made of a tough, flexible, polycarbonate material that makes it almost impossible to break.
• Five di... 

• Equalizer's® glass run channel cleaner reaches behind that lip to remove even the most stubbornly wedged pieces of glass that are almost impossible to get out with a screwdriver.
• The tool's rounded tip was designed to ... 

• 6 different sizes of locking strip tips, ranging in size from 3/8" all the way up to 3/4".
• Can be changed in seconds by loosening the hex screw.
• The 3/4" tip has a 90° angle to give the proper angle on ... 

• Designed with deep notches that will capture broken glass and pull it out from where it's lodged.
• Use the deep notch to pull out the broken glass, or the smaller notch to break it up into smaller pieces causing the glass t... 

The Equalizer Reusable Seat Protective Cover works well when you need maximum protection during servicing. Increase your service image with the help of this protective cover. The protective seat cover is made out of heavy-duty nylon, and... 

• All BTB blades are designed to be used with a manual handle.
• Pinchweld preparation blades work well with a manual handle.

• Z Blades will remain flexible and retain their sharpness much longer than the average cold knife blade.
• The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance less when pull... 

Ideal for installing windshields, side lites and back lites.    

Put handles where you need them to make lifting body panels and other loads up to 70lbs (32kgs) easy!... 

The Equalizer® UltraWiz® Cold Knife Blades feature an innovative reverse bend design!

These ultra thin glass cutting blades are bent in the reverse direction of a regular cold knife with the added paint protection ... 

The conical ground shape on the back of the blade is different from other blades. The design along with the serrations create a very thin blade with much less cutting resistance then anything in the industry! The radius grind is similar ... 

• Many windshields, back glasses and side glasses can still be removed with a cold knife.
• Made of the highest quality materials -stainless steel pull cable with fused end flute and large, easy-to-grasp aluminum pull handle i... 

The TightWire included in this kit is designed to cut out windshields and resists breaking in the process. It is made of 3 extremely strong stainless steel wires that are braided to form one wire. Then the wire is anodized to a smooth, g... 

• Used to cut across the tops and down the sides of windshield and back glasses
• Works great around small glasses or in tight areas
• Will also remove moldings and emblems
• BTB general purpose "Z" blade
... 

Makes clip removing simple!

Where interior door panel and molding clips might be cumbersome to remove with general tools, this clip removal tool is designed to... 

Fits all Equalizer® tools that use Express® Blades

Use when the urethane is not far below the dash. Also works great in hard to reach places.

• Medium Reach
• 9-1/2" flat blade
• For use with BTB tools

Long reach blade for reaching below dashboards or removing body molding and emblems.

• 11-3/4" Flat blade
• For BTB tools

Short, rigid blade for accessible, easy to reach adhesives

• Reverse serrated "Z" blade
• 5-1/2"
• For use with BTB tools

• This flexible, serrated blade follows contour of curved glass
• Extra long reach for access to those hidden adhesives
• 9-1/2" blade

• Used on most of Hondas and Acuras.
• Makes clip removal easy by by pushing down on all the tabs at the same time.
• When the ClipFork™ is inserted into the clip opening it pulls all of the locking tabs up past t... 

• 14-1/2" flat blade
• Provides extra long reach for those hard to reach areas
• Reach below dashboards and when urethane is behind a deep obstruction
• For BTB tools

• 1" Tip Length
• When cutting from the outside, no paint damage should occur if the back of the blade remains smooth & polished.
• Get a fast cut-out
• These blades can be used between most close fitted glas... 

Developed from daily use on hundreds of different vehicles.

Made of a proprietary grade of stainless steel.

BFE1400

• ... 

The Equalizer® Viper Glass Removal Kit – VIP1138 is one of the highest quality wire/cord glass removal devices you'll find on the market today. It's perfect for use on small quarter glass removals, but can also be used for jobs... 

• Slices windshield clips and posts
• Reusable up to 10 jobs per section
• Won't damage paint finishes
• Made in the USA

Since 2012, we have searched the world for a durable cord that could respond to... 

Our Rock Star® Repair System is designed to achieve three important results:

• A strong repair, a clear repair, and quick performance.
• The exclusively designed bridgeand stainless steel injector as... 

Squire 2 was specifically engineered to not only cut through the newest, toughest and widest urethane but Squire 2 will slice right through plastic clips and posts that are now being used by automobile manufacturers to place the windshie... 

Squire 2 was specifically engineered to not only cut through the newest, toughest and widest urethane but Squire 2 will slice right through plastic clips and posts that are now being used by automobile manufacturers to place the windshie... 

• Ideal total protection for the vehicle interior containing 5 high-quality protection elements in 1 set.
• Each piece consists of a seat cover with integrated floormat, steering wheel cover, gear lever and hand brake protecti... 

• 6 devices for a wide range of foreign and domestic vehicles:
  • #2 Phillips, T15, & T20 drivers as well as hook and pick devices that are perfect for loosening, prying, aligning & unfas-tening... 

• 2004+ Ford Standard F-Series Cowling Clips
• 25/64" (10mm) Hole Size
• Head Diameter: 20mm
• Stem Length: 12mm

Equalizer Viper Auto Glass Removal Tool VT1136

The Equalizer Viper tool is a wire removal device designed for small quarter glass removals, but can also be used on windshields and back glasses. It's small, light and easy t... 

• Designed to remove quarter glasses utilizing Equalizer® Express® Blades
• Features a hinged plate with blade clamp screw that locks the blade in place
• Machined aluminum hand tool
• PushKnife™ so... 

Equalizer ZipKnife Cold Knife offers a unique radius, which allows you to maintain a high level of control to the cutting head!

• Designed to cut urethane in hard-to-reach areas like quarter glasses or vent glasses
• Perfect for labor-intensive removals in areas around racks, cab-over camper shells, and decklids
• Uses all standard cold knife bl... 

• Made with an extremely thin utility knife bracket and a quick blade replacement design
• No screws, levers or devices lessening the chance for damaging a vehicle
• Quick blade change design
• Thin blade holder ... 

Set includes 1 of Each;

• ZK45 - ZipKnife™ Compact Cold Knife
• ZKLK34 - 12" ZipKnife™ Long Knife

ZipKnife™ Long Knives are made with an extremely thin uti... 

Gold Glass Group Mouldings will not shrink or discolor over time, never crimp around corners, always lay flush against the vehicle, never need a heat gun to install, and fit both thick windshields and thin tempered parts. A layer of buty... 

Gold Glass Group Mouldings do not shrink or discolor over time, never crimp around corners, always lay flush against the vehicle, never need a heat gun to install, and fit both thick windshields and thin tempered parts. A layer of butyl ... 

• Highly transparent
• Similar light refraction index as glass
• Saves having to purchase expensive OE pads
• 2017-2018 Audi A / Q
• 2017 Porsche Panamera
• 30 Day Warranty

HammerHead™ is an adapter for PushKnife™. When HammerHead™ is installed onto the end of PushKnife™, it acts as a receiving area for a rubber mallet to strike, enabling power from the blow to be transferred to the ... 

The pot for new construction when you really are going to be making hard pulls. Two 3" rebar legs bury themselves below the bottom of the pot for a secure anchor. Includes a lock cap to help keep dust and dirt out of the hole. Stays dry ... 

• Extra clear material provides good visibility if vehicle needs to be driven while waiting for the replacement glass
• Peels clean upon removal
• No need for tape or messy cleanup!
• Works great for vehicles bei... 

The Beast™ 18V Lithium-Ion Brushless and cordless auto glass reciprocating cut out system with GT Tools® Smooth Drive System™ (SDS) is the next generation of legendary performance and durability. The Beast™ leverage... 

This kit includes all the necessary components to convert the Dewalt® 20 Volt Lithium Ion caulking gun from the 10 oz cartridge to a 20 oz sausage pack.

The PipeKnife™ is 14" long and has a 6-1/2" flattened blade shaft with rounded corners. The PipeKnife™ is made of cast aluminum, but has a steel nut cast into the back side to receive the screw and prevent stripping of the th...