Print Catalog

Print Catalog > Glass Removal & Repair

Pinchweld Tools
1800856
Equalizer® Talon™ Oscillating Pinchweld Preparation/Scraper Blade, 1/2" Wide - 51850
  • High-quality blade made of flexible stainless steel - will flex before they break, warming you to back-off and decrease the amount of pressure. 
  • Flat on one side so they ride against the glass and cut... 
1800899
Equalizer® UltraWiz® Exposed Pinchweld Cold Knife Blades (Pkg 10)
  • Exposed Pinchweld Removal Blades solves the problem of scratches during installation.
  • UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will no... 
1801252
Equalizer® Pinchweld Cleaner Brush - JEB569
  • Equalizer's® Pinchweld Cleaner brush was designed specifically to avoid scratching the surrounding painted surfaces.
  • The brush is made with soft "crushed" bristles for contact with the paint, but enough stiffness in ea... 
1801031
Equalizer® BounceBACK™ Pinchweld Protection System - MDP181

Protecting the pinchweld when removing the glass has always been a problem for technicians. When a protector was placed between the glass and pinchweld the repeated hits by a power tool blade would cause that protector to jump out of th... 

1801251
Equalizer® Pinchweld Preparation Tool 7" Long, 1-1/2" Blade - IHW716

Equalizer Pinchweld Preparation Tool

Featuring a hardened steel blade and long shank, it is used to keep your hands away from pieces of broken glass when removing urethane and butyl from the pinchweld.

7" with 1.5"... 

1800880
Equalizer® Ricochet™ Pinchweld Protection System - PHV859

Protecting the pinchweld when removing the glass has always been a problem for technicians. Every protector they used could not withstand repeated hits by a power tool blade and would jump out of the pinchweld, leaving the paint exposed ... 

1800953
Equalizer® Replaceable Blade Pinchweld Preparation Tool - SB531
  • Tools are made of spring steel and are hard enough to hold an edge, but soft enough so they will not dig into the pinchweld.
  • Without Neoprene Cover.
  • 3/4" Wide Blade
 
1700619
Equalizer® Wide Pinchweld Scraper - SC170
  • A razor blade is too wide to use across the top or up most A-pillars, but it is ideal to use across the bottom.
  • The nice thing about this tool is that you pull out the old blade, put a new one in and you are ready to... 
1801114
Equalizer® BTB "Winged" Anti-Scratch Pinchweld Preparation Blade
  • Avoid damage to paint when removing excess urethane.
  • Anti-scratch pinchweld preparation blades work equally well for removing excess urethane after a windshield removal or for safely removing urethane with shattered temper... 
1700637
Equalizer® Pinchweld Preparation Kit - WK6SET

Kit contains:

  • (3) "winged" anti-scratch pinchweld blades 1/2", 3/4", and 1".
  • (1) wide pinchweld preparation blade ( 1-9/16") for removing the urethane along the bottom of cars with wide urethane.... 

By using this website, you agree to our use of cookies to analyze website traffic and improve your experience on our website. Learn More