• 24mm (.95-Inch) Hook Blade for WINDK - Windshield Remover
• Material,SUS420J2
• Hardness of the blades,HRC48~51
• Flexibility of the blades, 202-Square Millimeter

• 36mm (1.42-Inch) Hook Blade for WINDK - Windshield Remover
• Material,SUS420J2
• Hardness of the blades,HRC48~51
• Flexibility of the blades, 202-Square Millimeter

• 60mm (2.37-Inch) Hook Blade for WINDK - Windshield Remover
• Material,SUS420J2
• Hardness of the blades,HRC48~51
• Flexibility of the blades, 202-Square Millimeter

• 57mm Bent Blade for WINDK - Windshield Remover
• Material, SUS420J2
• Hardness of the blades:HRC48~51
• Flexibility of the blades, 202-Square Millimeter

• 90mm (3.55-Inch) Bent Blade for WINDK - Windshield Remover
• Material,SUS420J2
• Hardness of the blades,HRC48~51
• Flexibility of the blades, 202-Square Millimeter

• 52mm Curved Blade for WINDK - Windshield Remover
• Material,SUS420J2
• Hardness of the blades,HRC48~51
• Flexibility of the blades, 202-Square Millimeter

• Sold individually
• Sold in three sizes: 4", 6" or 8"
• Fits Astro 1770 Windshield Remover Tool

WARNING: This product ... 

GT Tools Slick H1 Blades
H1 Slick Blades have lubrication dimple points for smoother cutting. Works with GT.357, GT.38 Special, GT.44, and GT.45 reciprocating auto glass cut out tools as well as other industry recog... 

Used exclusively with the Diablo™ Auto Glass cutting tool, these blades were designed for maximum reach into long windshield and dash situations.

Available in two sizes:

3" x 12"
This 3" x 12" blade ... 

GT Tools® Serrated H2 blades have serration and lubrication dimple points for smoother horizontal cutting. These blades are designed to work with GT.357, GT.38 Special, GT.44, and GT.45 reciprocating auto glass cut out tools, as well... 

All GT ToolsTM sheath blades are made of high quality spring steel for maximum durability. These blades are designed to work with GT.357, GT.38 Special, GT.44, and GT.45 reciprocating auto glass cut out tools, as well as other industry r... 

Use the GT Tools ultrasonic transmitter on the interior of the cab and trace the exterior of the vehicle with the ultra sensitive receiving device that is attached to headphones so that an possible leak can be detected. A sharp increase ... 

UltraWiz comfort handle and unique clamping device inside the cold knife locks the blade at any height without the need for pins or bolts to fit through the holes. There is no need to remove the handle to change blades.

Comes wi... 

GT Tools ergonomic handle with patented rod clamping device locks the blade at any height without the need for pins or bolts to fit through the holes. Made of durable aluminum and steel components that are designed to take the abuse of e... 

• Made of tempered steel
• Set of 6

• Sharpened on both sides, makes it easier for the blade to cut through the center of the urethane if it does not rub against the glass. 
• High-quality stainless steel blades. 
• Fits the Falcon, Raven, and T... 

• Blades are made of hardened carbon steel and are bent the same way a regular cold knife blade is bent.
• They cut urethane by thrusting forward into the urethane and backwards away from the urethane as you pull the oscillati... 

• High-quality blade made of flexible stainless steel - will flex before they break, warming you to back-off and decrease the amount of pressure. 
• Flat on one side so they ride against the glass and cut... 

• High-quality blade made of flexible stainless steel - will flex before they break, warming you to back-off and decrease the amount of pressure.
• Flat on one side so they ride against the glass and cut the urethane at... 

• High-quality blade made of flexible stainless steel - will flex before they break, warming you to back-off and decrease the amount of pressure.
• Flat on one side so they ride against the glass and cut the urethane at... 

This kit features the most popular and frequently used Equalizer blades for its Falcon™ and Raven™ air tools. Each blade kit comes with four total blades including three Talon™ cold knife blades measuring 3/4", 1", and ... 

The Equalizer® UltraWiz® Cold Knife Blades feature an innovative reverse bend design!

These ultra thin glass cutting blades are bent in the reverse direction of a regular cold knife with the added paint protection ... 

The conical ground shape on the back of the blade is different from other blades. The design along with the serrations create a very thin blade with much less cutting resistance then anything in the industry! The radius grind is similar ... 

• For use in the Equalizer® Samurai.
• T-slotted blade allows you to quickly change a blade by pulling forward and down on the blade.
• To put in a new blade, push it into the lower part of the knife, push it up int... 

• Equalizer's® extra long serrated utility knife blades measure 3-3/4" long and give you an exposed cutting area of, at least, 2-1/4" (standard blades only give you 1" of cutting area)
• Designed so there is more length be... 

• Blades are made of spring steel.
• Serrated style is sharpened with a unique double-serration method. Each serration is also serrated. This sharpening method gives Equalizer® Blades a smoother and faster cutting action t... 

• 4" Replacement Blade for the Equalizer® GT, Excalibur®, Equalizer® Magnum, Magnum XP, Thor™, Equalizer® 12V, the Equalizer® Freedom and LiveWire™

• 12" Replacement Blade for the Equalizer® GT, Excalibur®, Equalizer® Magnum, Magnum XP, Thor™, Equalizer® 12V, the Equalizer® Freedom and LiveWire™

• 4" Sheath to hold blades for Equalizer Glass Removal kits 3801, 3802 & 3484

• 8" Sheath to hold blades for Equalizer Glass Removal kits 3801, 3802 & 3484

• protective sleeve that surrounds the blade so the blade will not damage the dash or garnish moldings.
• These three sheaths will fit any of the Equalizer® line of tools except the tools that utilize HydroBlade™ te... 

• Equalizer® HydroBlades™ have a series of small dimples stamped on the side of the blade that rides against the urethane.
• These dimples are designed to carry cutting lubricant into the urethane that is being cut ... 

Some areas require side-to-side cutting.This is more common around very radical curves in the glass, and in vehiclesthat have corners with a sharper-than-90° angle. It can be difficult to get allthe way up into these corners with a s... 

• These blades are made especially for the Ninja™ tool and designed to withstand the power produced by the back and forth motion of the air tool.
• Made of hardened spring steel.
• Standard Sharpened Blade
... 

Fits all Equalizer® tools that use Express® Blades

• The serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster cutting action.
• All... 

• The serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster cutting action.
• All Equalizer® Blades have the correct Rockwell hardness so they ... 

• The serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster cutting action.
• All... 

• The serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster cutting action.
• All... 

Cuts through the hardest of adhesives

• For cutting elastic silicon and acrylic connecting joints as well as for separating insulated glass.
• Extremely sharp edges will cut through the hardest of adhes... 

• Fein® Part No. 6 39 03 207 01 2
• Cutting part 1" long
• Sharpening 1 side regular, one side serrated
• Package of 2

• Fein® Part No. 6 39 03 208 01 0
• Cutting part 3/4" long
• Sharpening 1 side regular, one side serrated

Fein® Part No. 6 39 03 209 01 4

• Cutting part 1-1/2" long
• Sharpening 1 side regular, one side serrated
• Package of 2

• Tools are made of spring steel and are hard enough to hold an edge, but soft enough so they will not dig into the pinchweld.
• Without Neoprene Cover.
• 3/4" Wide Blade

The Equalizer HydroBlade Blade Sharpener is designed to do that quick touch-up that brings the auto glass cutting blade back to a razor-sharp edge!

Guide For Saw Blades - this is the guide that controls the saw blade.

The Equalizer Extra Long Utility Knife Blades are longer than standard knife blades and give you a larger exposed cutting area. It is designed to have more length between the two notches.

The Equalizer Extra Long Utility Knife Blad... 

• For reaching below dashboards or removing body mouldings and emblems.

• 14-1/2" flat blade
• Provides extra long reach for those hard to reach areas
• Reach below dashboards and when urethane is behind a deep obstruction
• For BTB tools

For reaching deep below dashboards and working with glasses when the urethane is deep behind an obstruction.

• 14-1/2" Long

Use when the urethane is not far below the dash. Also works great in hard to reach places.

• Medium Reach
• 9-1/2" flat blade
• For use with BTB tools

Designed with a long reach to follow the curve of the glass where the urethane is located.

• 9-1/2" Long
• Flexible Blades
• Smooth or serrated edge

• This flexible, serrated blade follows contour of curved glass
• Extra long reach for access to those hidden adhesives
• 9-1/2" blade

Designed for curved and small glasses and when working in confined areas.

• Choose smooth or serrated edge
• Sold separately
• 6" Long

A short and flexible blade for precise cutting in confined spaces, will follow contour of curved glass. 

• 1" Tip Length
• When cutting from the outside, no paint damage should occur if the back of the blade remains smooth & polished.
• Get a fast cut-out
• These blades can be used between most close fitted glas... 

When cutting from the outside, no paint damage should occur if the back of the blade remains smooth & polished.

Available in two styles:

• STANDARD (Yellow) for REGULAR exposed edge glass
• REVERSE (Orange) for... 

For when the urethane is not far below the dash or in an extremely difficult place to reach. 

This is one of the most versatible blades and can be used for urethane, body shop mouldings, and emblems. 

These blades are designed with a bend and are more flexible which allows them to contour to curved glass.

• 7-1/2" Long
• Flexible Design
• Smooth or Serrated edge, sold seaprately

Long reach for adhesives that are in difficult to reach places, will follow contour of curved glass. 

• Used to cut across the tops and down the sides of windshield and back glasses
• Works great around small glasses or in tight areas
• Will also remove moldings and emblems
• BTB general purpose "Z" blade
... 

Short, rigid blade for accessible, easy to reach adhesives

• Reverse serrated "Z" blade
• 5-1/2"
• For use with BTB tools

• Used to cut across the tops and down the sides of windshield and back glasses.
• Works great around small glasses or in tight areas.
• Will also remove moldings and emblems.

• Removes urethane with one pass, especially along the bottom of the windshield.

• Avoid damage to paint when removing excess urethane.
• Anti-scratch pinchweld preparation blades work equally well for removing excess urethane after a windshield removal or for safely removing urethane with shattered temper... 

The BTB system is an all-encompassing system for the removal of glass, mouldings, emblems, and body panels. At the heart of this system is the WK10HD Power Tool. This tool has an exclusive short and fast In-line stroke that absorbs the r... 

• Remain flexible and retain their sharpness compared to the average cold knife blade
• Blades made in USA
• 5 pack

... 

• Z Blades will remain flexible and retain their sharpness much longer than the average cold knife blade. 
• The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance le... 

The GT Tools locking strip tool design allows the tip to swivel 90 degrees in either direction. There are four different type eyelets that will fit the majority of rubber locking strips. Use the tip that most closely fits the locking str... 

The Fein® SuperCut™ is strong, versatile, durable, and, of course, fast, with a variable operation speed of 11,000 - 18,500 OPM. It allows you to work more efficiently, even in tough continuous use in heavy-duty auto glass cut ... 

UltraWiz® coated cold knife blades are made of hardened steel for maximum durability. There is a unique scratch resistant coating on the neck of the blade which prevents scratching on vehicle paint in tight tolerances. Designed with ... 

UltraWiz® coated cold knife blades are made of hardened steel for maximum durability. There is a unique scratch resistant coating on the neck of the blade which prevents scratching on vehicle paint in tight tolerances. Designed with ... 

GT Tools® standard cold knife blades are made of carbon steel for extended life and durability. Tested to withstand everyday stresses of cutting through the many variations of urethane, these blades are designed to take abuse and hol... 

GT Tools® standard cold knife blades are made of carbon steel for extended life and durability. Tested to withstand everyday stresses of cutting through the many variations of urethane, these blades are designed to take abuse and hol... 

UltraWiz® radius serrated cold knife blades are made to reduce cutting resistance. Each blade has a radius bottom that allows for less drag as it slices through the urethane. In addition, this blade includes serrations which reduce s... 

UltraWiz® radius serrated cold knife blades are made to reduce cutting resistance. Each blade has a radius bottom that allows for less drag as it slices through the urethane. In addition, this blade includes serrations which reduce s... 

Glass Technology's single edge razor scraper is a great option for trimming urethane. This tool makes pinchweld prep easy. Uses a single edge razor blade that can be easily removed and replaced. This is a great tool for the bottom dash p... 

GT Tools RazorScraper™ This thin razor sharp scraper blade tool is one of the most commonly used pinchweld tools. Now available to fit 1/2", 5/8" and 3/4" wide blades made of razor sharp steel. If you are not familiar with the Razo... 

The GT Tools® RazorScraper™ Plus System of pinchweld tools makes precision pinchweld preparation a breeze. Mix and Match a wide variety of Interchangeable surgical steel straight and anti-scratch “winged” blades wit... 

GT Tools® RazorScraper™ blades. These blades fit the RazorScraper™ (AGPWS-RZR) Pinchweld prep tool and are made of surgically sharp stainless steel.

• Sold in 10 packs
• Width: 3/4" / 0.75"

This blade has a unique anti-scratch wing blade design. GT Tools® RazorScraper™ blades fit the RazorScraper™ (AGPWS-RZR) Pinchweld prep tool and the handle in the AGPWSK Basic and Plus Kits. The blades are made of surgica... 

GT Tools RazorScraper Basic Kit includes: a razor handle holder as well as 5 each of 1/2", 5/8", 3/4" blades and 5/8" angle blades made of surgically sharp steel. This kit also includes a utility knife with 5 utility blades packaged in a... 

Replacement sheath for GT Tools® GT.357, GT.38 Special and GT.44 reciprocating tools. Sheath includes a protective scratch resistant coating that prevents unwanted scratching on interior garnish moldings. Works with all GT Tools®... 

The Windshield King!

The Single-Position KONG™ winding assembly unit is perfect for the specialist that is already equipped with wire and cord materials and the other ancillary items needed for non invasiv... 

We all have removed a windshield with a long knife and come into a situation where the urethane was too thick to cut through with a standard utility blade. These blades are strong and cut through ALL the urethane at once with this long b...