• Two-part urethane that is used to repair Thermo Plastic Olefins identified as TPO, PP, EP, and EPDM.
• Use with 3M Automix Polyolefin Adhesion Promoter, part number 05907.
• Excellent choice for nicks, gouges... 

• Clear adhesive that is used for attaching lightweight trim material such as upholstery cloth and trunk liners to metal and other surfaces
• May be used to bond styrofoam
• Quick setting, low mist formul... 

• Two part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
• The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins
... 

Industrial Grade Spray Adhesive

• Spray adhesive for light duty maintenance
• Bonds aggressively to plastics, foils, papers, flexible foam, fab... 

Do you have a bothersome plastic panel on your car that is impossible to keep in place? Bring in the 3M Semi-Rigid Plastic Repair 34240 adhesive for the job. The 3M plastic repair system is a high performance, semi-rigid, two component u... 

Looking for a strong adhesive for your automobile repair work? The 3M Panel Bonding Adhesive has excellent adhesion and can be used on both plastic and metal substrates like cold roll steel or aluminum. Even though the two-part epoxy for... 

• Two-part epoxy used to adhere backup strips and patches to SMC and FRP (traditional fiberglass)
• Medium work time or larger repairs
• Paste consistency

Technical Specifications... 

• Two-part, clear epoxy that delivers strong, durable bonds within minutes after application.
• Makes difficult repair jobs easy when used to join parts made of plastic, metal, glass, fiberglass, wood, etc.
• T... 

• Two-part epoxy used as a general purpose adhesive for metal, glass and plastic.
• Clear, non-yellowing adhesive
• 3 minute work time
• 25 minute handling time
• 60 minute cure time
... 

• Two-part urethane used to adhere SMC and FRP (traditional fiberglass) body panels to each other and to metal frames (metal must be primed with two part primer, 08278)
• Work time = 35 minutes, Cla... 

Strong and Heat Resistant

• A contact adhesive designed for bonding vinyl tops, heavyweight headliners and hood silencer pads where high strength and heat resistance are needed.
• The service temperature Range ... 

• For quick repair of nicks, gouges, or small defects on mentioned plastics due to extremely fast work time
• Excellent adhesion over a wide range of temperatures
• Two-part urethane adhesive used to repair Xen... 

Gluing glass to a metal or to glass itself is quite a challenging task without the right adhesive. Worry no more, as the 3M Automix Channel Bonding and Sidelite Adhesive works towards safely bonding moveable and stationary glass in autom... 

Provides Nearly Instant Bonding of Rubber, Metals & Plastics

• Cyanoacrylic adhesive kit used to provide near instant bonding of rubber, metal and pl... 

The 3M Automix SMC / Fiberglass Panel Adhesive is perfect for bonding sheet metal compound (SMC) and fiberglass reinforced polyester (FRP) body panels. It efficiently bonds SMC and FRP panels to each other and is also... 

Looking for a product that can ensure strong reinforcement of plastic automobile components? Try the 3M Automix Semi-Rigid Parts Repair. It is widely used for the backside reinforcement of plastic parts. The two-part urethane adhesive ca... 

• Two-part urethane adhesive that can be used to adhere backup strips and patches to SMC and FRP (traditional fiberglass)
• Has automatic mixing and metering
• Fast work time for small strip and patch a... 

The 3M 08223 Automix Universal Black Adhesive is a general purpose automotive adhesive for metal, glass and plastic!

• Strong and durable
• Works on a wide variety of substrates
• 3 minute work ... 

Great Heat and Water Resistance

• A low VOC, high-strength adhesive
• For bonding automotive materials (carpeting, jute pads, fabrics, plastics) to metal and other surfaces
• Good heat and wate... 

• Bonds all types of gaskets to painted or unpainted metal surfaces.
• Adhesive stays permanently flexible and rubbery, never dries out or becomes hard.
• Easy to brush and spread.
• Extre... 

• Excellent clear adhesive for plastic repair and emblem application.
• May be used for interior or exterior bonding.
• Used for bonding metal emblems, rigid plastic parts, taillight lenses and vinyl tr... 

• A strong, flexible, rubbery adhesive that can withstand vibration and extreme temperature variations.
• It can be used to bond automotive weatherstripping and is a great adhesive for holding paper, cork, or rubber gas... 

• 20-second set urethane adhesive that replaces cyanoacrylates
• Will not crack or become brittle like cyanoacrylates
• Rebuild tabs and repair broken eyelets
• Bonds to virtually any substrate and ha... 

Super fast-setting adhesive which does not require a separate accelerator such as cyanacrylate adhesives

• Has excellent wide gap filling capabilities an... 

• Two-part urethane
• Bonds backup strips to SMC and FRP
• Fast work time for larger backup strips and patch applications
• Excellent for bonding headlamp buckets
• Low viscosity
... 

Stays Strong in Extreme Temperatures

• Strong, rapid bonding, convenient to use adhesive.
• Good adhesion to rubber weather stripping, vinyl, metal, glass,... 

Did you reverse your car in a hurry without checking the blind spot? Okay, you cringed when... 

Provide solid adhesion to an amazing variety of plastic and metal substrates in the automobile field with the 3M Automix Panel Bonding Adhesive - 08115.

Being a two-part epoxy adhesive, it can give you better work-time and performa... 

Two-part epoxy used to bond plastics, steel, aluminum, SMC, and FRP (traditional fiberglass)

• Primary Uses - replace quarter panels, roofs, box sides, van si... 

Ensure a strong bond when you repair vehicle panels, side panels, door skins, an... 

The Lord Fusor Metal Bonding Adhesive (Slow) is perfect for a variety of applications ... 

Plasti... 

The Lord Fusor Extreme Bumper Repair Adhesive (Medium) repairs bumpers and door trims. T... 

The 3M Automix Flexible Part Repair helps in fixing flexible and semi-rigid plastic parts. This two-part epoxy material provides excellent sanding properties and flexibility. It is compatible with common plastics and for best results Use... 

The 3M Automix E-Z Fix Flexible Patch is a patch that is strong, flexible and easy to apply. It produces a clean appearance on the back side repair. There is no cure time needed before applying the cosmetic filler to the front side of th... 

• Fast-drying black adhesive used for bonding and sealing weather stripping.
• Also an excellent adhesive for new EPDM weather stripping.
• Easy to apply.
• Remains flexible and waterproof.
... 

3M 07333 Adheres to a Wide Variety of Properly Prepared Automotive Substrates Including Steel & Aluminum

This 3M structural adhesive is a perfect t... 

• Repair damaged bumpers and re-build tabs
• Can also be used to bond many dissimilar materials such as plastic, fiberglass and metal
• 200 mL
• Work Time: 50 seconds
• Paint Time: 15 minute... 

Try our 3 Bare-Metal Seam Sealer is a tough, flexible sealing material formulated for sealing bare metal joints, such as steel or aluminum, as well as primed or painted metal in collision repair. Two-part, self-mixing epoxy sealer can be... 

3M Auto Glass Urethane Windshield Adhesive is a black, medium viscosity, one-part moisture curing urethane adhesive. It provides high strength material designed to bond and seal vehicle windshields and stationary glasses. It is easy to u... 

Great for repairing bumper tabs, trim and small plastic parts

The Norton SpeedGrip Adhesives are two-part urethane adhesives used for structural and cosmetic repairs of all plastic bumpers including TPE, TPO, T... 

Good for elevated temperatures

The Norton SpeedGrip Adhesives are two-part urethane adhesives used for structural and cosmetic repairs of all plastic bumpers including TPE, TPO, TEO, PP, and ABS. It is easy to ... 

The Norton SpeedGrip Adhesives can also be used to bond SMC or fiberglass panels. It works well at elevated temperatures and is great for installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflecto... 

The U-Pol Tiger Seal Urethane Adhesive & Sealant is a superior quality product that is used to seal and fortify body panels and trims in automobiles. It is a handy product to have in your toolbox or body shop since it can be used on ... 

 ... 

Get 10... 

Get 10... 

Does your car have a bothersome plastic body panel or emblem that is just next to impossible... 

Loctite Threadlocker is a must-have for any assembly job. Trusted & and used by mechanics and body shops worldwide. It's hard to imagine any toolbox without at least one tube of it in there.

Many times you don't want a permanen... 

• Repair interior fabrics, foam, carpets, plastics, rubbers, & other automotive materials
• Resistant to extreme weather conditions
• Water resistant
• Dries clear

Tech info... 

• For installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets and other body panels
• Substrates: SMC, fiberglass, carbon fib... 

Versatile metal and plastic panel bonding adhesive offers no odor or tack.

Applications

• Installation of large aluminum, steel and SMC/FRP body panels. This includes quarter panels, floor pans. rear ... 

Lord Fusor Crash Durable Structural Adhesive is a metal bonding adhesive that is good enough to replace all OEM single-component crash durable adhesives. It helps in restoring vehicles to the original condition before an accident. Use it... 

LORD Fusor® 132/133 repair adhesive can be used on bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.

Features and Benefits

• Sand and paint in 1... 

Save when you buy 12 or more!

• .21" x 4.5" x 24-element (5.3mm x 114.33mm x 24-element)
• For use will all 1:1 and 2:1, 1.7 oz (50 mL) cartrid... 

Repair or bond composite panels such as large assembly bonding of body panels, fairings, ground effects, spoilers, roofs, wind deflectors, and fender lines with the Lord Fusor SMC Repair Adhesive (Slow). It shows efficacy on substrates s... 

• 0.34" x 5.8" x 24-element (8.6mm x 147.3mm x 24-element)
• For use with all 1:1 and 2:1, 300 mL (10.1 oz) and 225mL (7.6 oz) cartridges
• Available individually or by the case for your convenience.
... 

Installation and bonding of body panels are made easier when using the Lord Fusor Plastic Bonding Adhesive (Medium). This adhesive works on binding substrates such as SMC, fiberglass, carbon fiber and other plastics to itself and primed ... 

The Lord Fusor Plastic Bonding Repair Adhesive (Super Fast) is a super strong bonding adhesive that can be used on all plastics, primed and painted metals, glass, wood and other surfaces. This clear, non-yellowing structural adhesive has... 

Create strong bonds on plastic body panels, ground effects and spoilers with the Lord Fusor Plastic Bonding Adhesive (Slow) - 127EZ. This slow bonding adhesive works on binding several substrates - Metton, carbon fiber, SMC, fiberglass, ... 

Looking for a product that can effectively patch dissimilar metals on vehicle panels? Y... 

If you are looking for a versatile adhesive for your body shop or garage, try the Lord Fusor Plastic Panel Repair Adhesive (Heat Set). It can be used to repair body panels, hoods, decks, and doors..

This special adhesive can be us... 

• Bonds scuff liners to composite, wood or primed surfaces as well as composite body panels to primed metal surfaces
• For installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflec... 

• Ensure proper mix ratios for DUAL-MIX products.
• 0202 come standard with all DUAL-MIX products except 39997
• Made in USA

This item can only ship by ground within t... 

Order (12) SEM cartridges and receive a FREE Manual Applicator Gun. Click for details.... 

Order (12) SEM cartridges and receive a FREE Manual Applicator Gun. Click for details.

Dual-Mix™ Problem Plastic Repair Material ... 

Order (12) SEM cartridges and receive a FREE Manual Applicator Gun. Click for details.... 

Order (12) SEM 7 oz cartridges and receive a FREE Manual Applicator Gun. Click for details.... 

Order (12) SEM cartridges and receive a FREE Manual Applicator Gun. Click for details.... 

Order (12) SEM cartridges and receive a FREE Manual Applicator Gun. Click for details.

• Repairs a wide variety of automotive p... 

Order (12) SEM cartridges and receive a FREE Manual Applicator Gun. Click for details.... 

Just Like POR-15 but in a Tube and Thicker!

Do you love using POR-15 but wish it was just a little thicker? Here it is, POR-15 in a tube. Just like POR-15 it dr... 

• Insta-Bond Accelerator speeds the curing process
• Sold in 2 oz spray bottles

WARNING: This product can expose you t... 

Fast Set - Clear Adhesive

Clear Fast Set Adhesive provides fast bonds to a variety of substrates.

• Bonds to: wood, fiberglass, metal and plastic<... 

• Ensures proper mix ratios
• Helps duplicate OEM seams
• Easy to clean
• Spray end has tabs for easy assembly
• Use with seam sealers and sound dampening materials

Order (12) SEM cartridges and receive a FREE Manual Applicator Gun. Click for details.... 

Effectively Remove Reactive Adhesives
3M™ Specialty Adhesive Remover is a solvent-based specialty adhesive remover is designed to remove reactive adhesives from a variety of substrates. Reactive adhesiv... 

• Can be used with all 1:1 and 2:1, 7.1oz/210ml cartridges
• 0.34" x 5.8" x 24 element
• Integral threads for easy installation
• Pack of 12