Spartan Reducers deliver a combination of value and quality for use in primers, sealers, clearcoats and other refinish products. They are compliant with the National Rule overning VOC emissions. Note: Spartan Reducers are not compati... 

Improves Sprayability

This additive may also be used with Kirker's Diamond Pearl series colors, Urethane Candy Baseseries colors and the SPECTRA Series Urethan... 

Fish eyes are caused by contamination "most often in the form of silicone, water, oil and/or grease" on the substrate.  The best defense against fish eyes is a properly prepared surface and clean work environment, however sometimes ... 

• Used with Kirker Ultra High-Solids Clear
• 3 Speeds: Fast for low temp, small jobs, Medium for Mid Temp or Slow for High temps, large jobs
• 1 Quart
• Made in USA

... 

Low-VOC
These are not Waterborne

These new basecoats are made with the same 2-part urethane technology used in Kirker's ULTRA-GLO single-stagepaints, but ... 

• For use with Kirker Eurothane Clear
• 2:1 Mix ratio
• 1 Quart
• Made in USA

2 Formulas Available

• Fast activator for temps below 80°F
... 

• 1 Quart
• Mix ratio is 4:1
• Add one quart 4.8 V.O.C. activator/reducer (Fast, Med, Slow) to one gallon EC100, or one gallon of the Zoom Flash Dry Clear - V2010G
• Made in USA

... 

Kirker EPC611 Enduro Prime Epoxy Primer Catalyst

• Catalyst for Enduro Prime DTM Epoxy Primers
• Mix Ratio: 1:1
• Available in quart and gallon sizes
• Made in USA

• Strong solvent blend works fast to remove paint
• Breaks down stubborn residue and overspray 
• Packaged ready for use, no mixing
• May be used in automatic gun cleaning systems
• Avai... 

Kirker UA-1600 Car Paint Activator:

• 1/2 pint or 1 Quart bottle
• Works with all ULTRA-GLO paints
• Mix Ratio: 3 to 1
• Available in medium and slow speeds

Kirker UR-9065, UR-9075 & UR-9085 Auto Paint Reducer:

• Aids in sprayability
• Improves flow and leveling
• Contributes toward beautiful gloss finish
• Available in 1 gallon... 

Low-VOC
Activators are not waterborne

These new basecoats are made with the same2-part urethane technology used in Kirker's ULTRA-GLO single-stagepaints,... 

• Works with Evercoat polyester primers (Feather Fill, Slick Sand)
• .75 Fluid ounce tube (22 cc)
• Liquid hardener
• Hardening agent for use with all polyester resins and gel coats.... 

• Catalyst for Feather Fill Polyester Primer
• Epoxy enriched catalyst to be mixed with Evercoat's 4:1 polyester primer surfacers
• Waterborne paint compatible
• VOC compliant
• One Quart &... 

Fast 4:1 Polyester Primer Catalyst is a patented, epoxy enriched catalyst that provides unsurpassed performance in cooler temperatures, when mixed with Evercoat's line of 4:1 polyester primer surfacers.

• Fast catalyst for... 

Use the U-Pol System 20 Hardeners in conjunction with all SYSTEM 20 2K coatings. This premium quality isocyanate hardener is clear, and you can use it easily with clearcoats, without worrying about discoloration of the finish. The System... 

Designed for use in temperatures between 65° - 80°F (19° - 27°C) or for spot & panel applications.

Extra Solids Acrylic Urethane Clearcoat A... 

No induction time required. Direct to Metal.

2K Epoxy Primer Sealer is an exceptional lead and chromate free corrosion resistant primer with excellent adhesion on a variety of substrat... 

Activator Specifications:

• Size: 1/2 Pint
• Color: Activator
• Category: Primer Sealer
• Actual V.O.C.: 5.3#/gal
• Regulatory V.O.C.: 5.3#/gal
... 

2K Kwik Prime Direct to Metal is a two component primer surfacer that can be applied direct to metal surfaces. It is quick drying and easy to sand wet or dry. Kwik Prime provides corrosion protection along with excellent fill and build p... 

Amber Rustproofing matches OEM appearance while providing superior rust protection.

Give your vehicle an effective and dependable protection from harmful rust w... 

No induction time required. Direct to Metal.

2K Epoxy Primer Sealer is an exceptional lead and chromate free corrosion resistant primer with excellent adhesion on a variety of substrates. It can be used to protec... 

DIRECT TO METAL

Euro Classic Primer is a two component primer surfacer that can be applied direct to metal surfaces. It is quick drying and easy to sand wet or dry. It provides ... 

Kwik Seal 2K Urethane Sealer has been specifically formulated as a premium quality sealer to be used over a variety of substrates. Kwik Seal offers excellent adhesion to bare metal, aluminum, SMC, fiberglass, old paint finishes and all T... 

Specifically designed to crosslink with selected Transtar's Clearcoats - 6531, 6571, 6801, 6841, 6861, and 7761-MTR to provide a long lasting high gloss finish. Ideal for spot & panel repairs and for use in cool/cold temperatures... 

Specifically designed to crosslink with selected Transtar's Clearcoats - 6531, 6571, 6801, 6841, 6861, and 7761-MTR to provide a long lasting high gloss finish. Ideal for spot & panel repairs and for use in cool/cold temperatures... 

Specifically designed to crosslink with selected Transtar's Clearcoats - 6531, 6571, 6801, 6841, 6861, and 7761-MTR to provide a long lasting high gloss finish. Ideal for spot & panel repairs and for use in cool/cold temperatures... 

Technical Sp... 

Transtar Urethane Grade Reducers are designed to be used with Transtar Urethane Primers and Clearcoats. These reducers can be used with virtually any brand of primer, basecoat or clearcoat that requires a urethane grade reducer. Reducers... 

Transtar's Basecoat Reducers have been formulated as a comparable offering for use in Dupont's ChromaBase and ChromaPremier Basecoat colors. These new Basecoat Reducers will improve overall appearance for a smoother basecoat finish and b... 

Activator for Transtar's 2K Self-Etching Primer

Technical Specifications

• Mix Ratio 1:1 by volume
• Color: Olive Green
• Size: 1 gallon or 1 quart

2K Kwik Prime Direct to Metal is a two component primer surfacer that can be applied direct to metal surfaces. It is quick drying and easy to sand wet or dry. Kwik Prime provides corrosion protection along with excellent fill and build p... 

Get a metal flake look without the intense labor associated with flakes

House of Kolor proudly introduces the next generation of our highly popular Metajuls® MBC Series in the Shimrin2® system. Shimrin2®... 

For use with House of Kolor UC21 Universal Acrylic Urethane Klear

Available in 3 Speeds

• UA22 - Fast
• UA23 - Medium
• UA24 - Slow

This item can... 

Available in half pint or 1 quart

This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.

This product must be mixed with other products before use. KU150 is a multi-purpose catalyst for urethane finishes. It is used in the KO-SEAL® II Primer Sealers, UC35, and UFC35 Kosmic Klears.

Part & Related Part Number(s)... 

• KU100 is for use in only Kosmic Klear UC1, UK Kosmic Kandys, and UB Kosmic Urethane Enamels.
• KU100 must be mixed with the products having UC1, UK, and UB codes before use.
• CAUTION: Not to... 

• Recommended for use with our Kosmic Kolor® Base Coats, Shimrin® Base Coats, Kandys, and Klears.
• Has staged release for proper flow out, leveling, and gloss retention.

This ... 

1 Quart Activator for Direct Prime

4:1 Mix Ratio

• For use with all Sherwin-Williams Rod and Restoration Colors
• Available in 3 speeds: Fast, Medium and Slow
• Choose quart or gallon cans

For ATX Clearcoats

• 4:1 Mix
• For use with ATX Spot and Overall clearcoats

Specifications

• Color: C... 

• 4:1:1 mix Ratio: Clear + Reducer + Hardener
• Size: 1 quart
• Use with Dimension Clearcoats & Reducers

• 4:1:1 mix Ratio: Clear + Reducer + Hardener
• Size: 1 quart or 1 Gallon

• DR732 - Cool - Temperature Range: 50-65ºF
• DR733 - Moderate - Tem... 

The Sherwin Williams HAPS-Free 2k Stabilizer is primarily for use in ultra motorcoach basecoat. It features a HAPS-Free stabilizer and meets all MACT regulations for OEM RV manufacturing and improves metallic orientation across large sur... 

Factory Color Matching available on Sherwin-Williams Paint! Call for price and details 1-800-382-1200.

The Finish 1 Hardener is a perfect addition to the collec... 

The Finish 1 Etch Primer Reducer improves the atomization and the flow out of paint, when used with the Finish 1 Etch Primer in a 1:1 ratio. It... 

Give your projects a great finish and gloss with the USC 10 Universal Urethane Clearcoat.

Why is clearcoat necessary?

Clearcoat can provide your vehicle with the enhanced durability and an excellent gloss... 

A premium "medium" reducer manufactured using virgin-grade solvents formulated for premium performance. Versatile, covers a wide range of shop conditions.

• 1 gallon

• For use with acrylic urethane coatings
• Ideal for spot and panel repair and for different climates
• Can be used with primers, clears, basecoats or solid colors
• Water clear so does not color the ... 

Clearcoat Activators are specifically designed for high productivity shops using Transtar Clearcoats. Activators are suitable for use in clearcoat applications over single stage topcoats and for base/clear applications (except lacquers).... 

Transtar's® Urethane Grade Reducers are designed for use in Transtar's urethane primers, topcoats and clearcoats. Additionally, they can be used in virtually all brands of urethane primers, topcoats and clearcoats. These reducers mus... 

Hardener for Kirker Syn-Glo Enamels

1 Pint

Reducer for Kirker Syn-Glo Enamels

1 Gallon

Low-VOC
Activators are not waterborne

These new basecoats are made with the same2-part urethane technology used in Kirker's ULTRA-GLO single-stagepaints,... 

Low-VOC
Activators are not waterborne

These new basecoats are made with the same2-part urethane technology used in Kirker's ULTRA-GLO single-stagepaints,...