• 12 Foot Chain with Clevis Slip Hook
• Suitable for all frame machines with 3/8" chain
• Beautiful bright gold colored finish and heat treated for maximum strength
• Ultimate strength is 26,... 

• 3/8" Clevis Grab Hook
• Our most popular hook
• Gold finish

• 5 Foot Chain with Clevis Slip Hook
• Suitable for all frame machines with 3/8" chain
• Beautiful bright gold colored finish and heat treated for maximum strength
• Ultimate strength is 26,40... 

• 8 Foot Chain with Clevis Slip Hook
• Suitable for all frame machines with 3/8" chain
• Beautiful bright gold colored finish and heat treated for maximum strength
• Ultimate strength is 26,4... 

• Use for a variety of chain hookups
• 2000 lb. load rating

• Use for a variety of chain hookups
• 2000 lb. load rating

• Use for a variety of chain hookups
• 2000 lb. load rating

• Allows down pulls with floor pots
• Fastens to pot with chain lock (included)
• Only one made that a 3/8" chain will go through
• Can also be bolted down to frame rack
• Ma... 

• General purpose chain shortener
• 3/8" applications
• One grab hook on each end
• 6600 lb. capacity
• Made from steel

• Use for pulls on floor sections and quarter panels
• Gator teeth ensure non-slip pulls on any lip
• Chain loop allows pulling at any angle
• 4-ton pulling capacity
• Made in U.S.A.
... 

• Extremely versatile
• Pulls angles without twisting.
• Pulls from both sides of clamp
• Does end pulls and straight pulls
• Made in U.S.A.

• Pull plate allows direct side pull
• Ideal partner to the #2430 (3-Way Angle Pull Clamp.)
• Grab hook provides fast hookup
• Made in U.S.A.

• C-shaped jaw reaches around flanges
• Does straight pulls quickly
• 4 inch wide jaw
• Made in U.S.A.

• Combines 3 way and side pull clamps
• Most versatile of all clamps
• Does angle pulls, end pulls, side pulls and straight pulls.
• Made in U.S.A.

Protects door openings during body pulls

• Unique corner clamp keeps pressures in line
• Does pull hookups & push hookups
• Comes with push couplings f... 

Many different shop uses. Use in correction of strut towers. For attachment to existing bolt holes. Designed for use with 3/8" chain. 

• Overall Length: 19" (483mm)
• Capacity: 2 tons (1,814kg)
• H... 

Tool Board ONLY.

Does not include any tools.

Keep your tools organized and in good condition with handy Mo-Clamp tool board. 

Tools are sold separately.

Board has spa... 

• A bend of 30 degrees makes all the difference when hooking up this tough guy onto a frme rail and making corrections.
• Combined with swivel holes under the jaws the right angle for the job at hand is assured.
... 

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of 3/8" chain included.

• Overall Length: 25 1/4" (654 mm)
• Working Load Limit: 6,600 lbs
• Heat Treated Steel. 
... 

Use the Mo-Clamp Double Claw Hook as an accessory with draw bars or chain. Use a pair with Triangle or Oval Loop as a chain sorter, double hook, or bumper hook.

Designed for use with 3/8" chain. 

Makes possible one- or two-directional pulling and can be used in a confined area. Gator teeth grip metal firmly. 

• Gripping Surface: 2" wide (51 mm)
• Overall Length: 8 1/2" (21 mm)
• Capacity: 3... 

The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and easier. Hardened gator teeth firmly grip narror seams and pinch welds. Clamp has... 

• Includes 2 ea. 1/2" shackles
• 13" wide gripping surface
• 6" overall length
• 6-ton ... 

Four hole-size selection for quick hook-ups in existing frame holes for pulling of damaged frames. Uses Mo-Clamp's easy chain hook-up system. Hole sizes: 1 7/8" (48 mm), 1 5/8" (41 mm), 1" (25 mm), 7/8" (22 mm). 

• Ov... 

Quick tie-down for track systems or back anchoring on frame racks.

The lip on the Mo-Clamp Track Hook can be used for pulling damaged areas; varied multiple uses for chain lengthening or shortening. Slot c... 

The Mo-Clamp Jumbo "G" Clamp - 5802 has a throat opening of 7 inches to get over, around and behind the damage.

Multiple holes allow for various angle pulls. Includes swivel pad. Optional (sold separately)... 

Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy. 

• Overall Length: 12" (305mm)
• Capacity: 5 tons (4... 

Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy. 

• Overall Length: 12" (305mm)
• Capacity: 5 tons (4... 

• Here's the answer to your problem of having to reach around a door pillar and not crush it when pulling on a side hit.
• Allow a good, even pull by wrapping this strap a couple or three times around a pillar, strut, lo... 

Tightens chain when used with a #1700 Chain Locking Fork on frame racks and other applications. 

• Overall Length: 12" (305mm)
• Capacity: 6 tons (5,443kg)
• Heat Treated Steel.

For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. #210030 Small Bracket (2" x 3") and #210020 Large Bracket (2" x 9") included. 

• Overall Length: 21" (533mm)
• Thro... 

Mo-Flex slings are extremely flexible to conform more easily to the curve of surfaces being pulled. The protective pad slips around the sling to provide protection to the sling when wrapped around sharp objects. Two lengths to choose fro... 

• Like the Mo-Clamp Tie down Hook Cluster 6325 but with a longer chain to make hook-ups on wreckers and other vehicles easier
• 3/8" grade 70 chain
• 4 ton capacity
• Includes 4 of the most used hooks... 

The Mo-Clamp Ford "T" Hook with Grab Hook - 6313 is an original shipping tie down for Ford vehicles.

Excellent around the frame machine to help hold a frame while diamond is being pulled.

5/... 

The Mo-Clamp 6311 Ford "T" Hook with chain is the original shipping tie down for Ford vehicles.

Excellent around the frame machine to help hold a frame while diamond is being pulled.

3/8" Cha... 

The Mo-Clamp GM "R" Hook with Grab Hook is the original shipping tie down for GM vehicles.

Excellent around the frame machine to help hold a frame while diamond is being pulled.

5/16" (7.94mm) Chai... 

Working Load Limit: 5,500 lbs
Weight: 2 lbs (.91kg)
Capacity: 7 tons (6,350kg)  

The 3/8" Clevis Slip Hook is made out of heat treated steel.

Made in the U.S.A

Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy. 

• Overall Length: 10.5" (267mm)
• Capacity: 5 tons ... 

A handy chain hook-up pulling plate for making double pulls. The special design allows for both wide or narrow pulls. Double pulls, using multiple self-tightening clamps, can be made from the same pulling tower or pulling post. Features ... 

The Mo-Clamp Multi-Purpose Anchor Hook is a valuable, small hook device for use on both conventional frames and unitized bodies.

The different ends are used for a variety of pulls and anchorin... 

Try the Mo-Clamp Jumbo Deep Hook Set - 6410 for fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places.

Small Bracket (2" x 3") and Large Bracket (2... 

Use the Mo-Clamp Regular Deep Hook Set for fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places.

Small Bracket (2" x 3") and Large Bracket... 

The reversible Mo-Clamp Mini-Bite with pull ring is designed to get around lips and corners for strong pulls and to pull narrow seams and lips. Cross-hatch tooth design assures a firm grip.
... 

The Mo-Clamp "G" Clamp helps you pull using various angles and makes pulling considerably easier. With a throat opening of 4 inches, the G clamp allows you to get around, behind and over the damage pretty easily. The G-Clamp brings in mo... 

The Mo-Clamp 3-Way Pull Clamp - 4030 has recessed pockets to hold bolts stationary for easy tightening.

Gripping Surface: 4" wide (102 mm), 1/2 " deep (19 mm)
Overall Length: 8" (... 

The Mo-Clamp 4-Way Pull clamp has recessed pockets to hold bolts stationary for easy tightening.

Includes Oval Loop.

Gripping Surface: 4" wide (102 mm), 3/4 " deep (... 

The Mo-Clamp Versa Hook is a versatile tool used as an outer track tie-down to secure vehicles during pulls.

It is used as a pulling device for rocker pane... 

The Mo-Clamp Big Mouth Clamp - 0680 is self-tightening. A perfect solution for hard-to-get-to areas. Great where large opening is needed.

Original wedge; cross-hatch tooth... 

The Mo-Clamp Baby Box Clamp - 0670 is self-tightening. Great for single-lip flanges and inside frame horns.

Original wedge; cross- hatch tooth design; spring-loaded for easy openin... 

The Mo-Clamp Long Nose Clamp is self-tightening and includes the original wedge.

Cross-hatch tooth design, spring loaded for easy open... 

Use the Mo-Clamp Mini Deep Hook Set for fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places.

Includes Horizontal Bracket and Vertical Bra... 

The Mo-Clamp Angle Bite Clamp - is a self-cleaning, self-tightening clamp with a gator tooth design and a 45-degree head for those hard-to-pull areas, such as the Mercedes 107 front chassis rail.

Drop... 

• The Junior Versa Hook is designed smaller to allow access to tight areas.
• End is only 13/4" wide for pulling on rocker panels, door posts, etc. 
• Back lip is used for a tie-down to secure the ve... 

Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. 

Use the Mo-Clamo Lip Grip with Side Pull as a sandwich clamp on quarter panels or floor sections. The chain loop permits pull... 

A must for pulling on box rails with welded-on bumper flanges. Reaches around protruding metal to get a grip on hard-to-reach surfaces. Its heat-treated jaws grip a substaintial area for pulls from several directions and angles. Gator to... 

Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on most surfaces. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be... 

Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on almost any surface. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws c... 

• Spring-loaded operation makes clamp easier to use.
• Pivoting, gripping heads allow for a secure grip on uneven surfaces.
• Retaining bolt holds clamp in place.
• Heat-treated, investment... 

Spring loaded for easy opening. Includes Oval Loop for use with Slip Hook for easy hook-up. For light sheet metal in those tight places. Cross-hatch tooth design for an agressive bite. Clamp has raised "ears" to hold bolts stationar... 

The A™ Clamp grips narrow seams and ridges. Hardened steel cross-hatch teeth assure a secure pull. Excellent for use with slide hammer. Clamp has raised "bolt stoppers" to hold bolts stationary, for easy, one-handed tighteni... 

The Mo-Clamp "W" Clamp is the Super Clamp for the tough jobs.

Self-Tightening. Ultra-wide gripping surface. Grabs 4¼" of metal. Original wedge. Original straight cut tooth des... 

• "T" hook, "J" hook and "R" type hook on a ring
• Hundreds of uses
• Grade 70
• Made in U.S.A.

• Ratcheting binder with built-in handle
• Fits 5/16" - 3/8" chain sizes
• Take-up inches: 8"
• 8,800 lbs. weight capacity
• All U.S.A. made top quality

• Ideal general purpose load binder for 3/8" frame chain applications.
• Working Load Limit: 6,600 lbs.
• Heat treated
• Use chains 5/16" - 3/8"
•  DO NOT exceed work load limit... 

• 1-1/8" wide jaw perfect for small narrow areas.
• Self-tightening with built in chain notch.

• 1-1/4" wide grip with 2" deep throat.
• 360 degree self-tightening pull ring.
• Removable multi-directional pull ring.
• Non-slip teeth designed to hold tight.

• 360 degree self-tightening pull ring.
• 1-5/8" wide grip.
• Removable multi-directional pull ring.
• Non-slip teeth designed to hold tight.

• 360 degree self-tightening pull ring.
• Has 182 individual teeth for working in tight areas.
• 1-5/8" wide grip.
• Non-slip teeth designed to hold tight.

• 8" J hooks withandnbsp;T Hooks on 2 foot chains with Claw Hooks
• Excellent for multiple pulls or tie downs
• All USA made top quality

• "T" hook, "J" hook and Grab hook on a ring
• Heat treated, gold plated
• Made in U.S.A.

• Ratcheting binder with built-in handle
• Fits 5/16" - 3/8" chain sizes
• Take-up inches: 8"
• Working Load Limit: 5,400 lbs

• Ideal general purpose load binder for 3/8" frame chain
• Fits all 3/8" chain applications

• Perfect for use with newer car bodies that have hard-to-reach hook-up positions
• Made of high s... 

• Pull tail light openings and small car quarter panels
• Smaller version of popular quarter puller
• Perfect for small, tight openings
  
• 6″ bars
• Made in U.S.A. ... 

• Hooks under wheel well opening for super fast pull
• Also great for deck lids and core supports
• Can also be used to block doors and hoods
• Hammer out dents
• Hammer rear bod... 

• Grips and pulls multiple pull pins (studs) and vertical or horizontal flanges
• 3.5″ jaws provide evenly distributed pulling force while pulling multiple pull pins or flanges
• 2 large pulling rings... 

• Kit Includes:  6mm, 8mm, and 10mm eye bolts, right angle pulling plate and hood hinge plate, and attaching ring.
• Eye bolts allow you to pull plates, etc.
• Hood hinge plate allows you to pull h... 

Steck QuarterPuller - 20022

• Hooks under wheel well openings for super fast pull
• Also great for deck lids and core supports
• First of its kind!

• 1-1/4" wide grip reduces tearing stress.
• Deepest 360 degree clamp with a depth of 2-3/8".
• 360 degree self-tightening pull ring.
• Non-slip teeth designed to hold tight.
... 

Perfect for connecting chain between floor anchors, hooking onto clamp plate pull rings and many other uses.

• General purpose chain shortener
• Grab hook on one end, slip hook on the other end
• 3/8... 

5 ton capacity

The harder it's pulled, the tighter it clamps. 3-ton clamp with serrated jaws that open up to 1-1/2".

• Overall length 10-1/2"

• Drop forged, heat treated, quenched and tempered carbon steel construction
• Shot blasted natural finish meets ANSI B18.15-1985
• Shoulder pattern
• Made in USA

Specifications... 

Frees Up Your Hands While Locking Down Your Work

• 18" long, adjusts to 9 1/2"

Locks Down Your Work to Keep Your Hands Free

• 3 Piece Locking C-Clamp Set

• Better than using a grab hook.
• Avoids twisting of chain.

• Suitable for all 10-ton applications for frame machines with 3/8" chain.
• Beautiful bright gold colored finish and heat treated for maximum strength.
• Ultimate strength is 26,400 lbs.- enough for an... 

• Suitable for all 10-ton applications for frame machines with 3/8" chain.
• Beautiful bright gold colored finish and heat treated for maximum strength.
• Ultimate strength is 26,400 lbs.- enough for an... 

• Suitable for all 10-ton applications for frame machines with 3/8" chain.
• Beautiful bright gold colored finish and heat treated for maximum strength.
• Ultimate strength is 26,400 lbs.- enough for an... 

• Suitable for all 10-ton applications for frame machines with 3/8" chain.
• Beautiful bright gold colored finish and heat treated for maximum strength.
• Ultimate strength is 26,400 lbs.- enough for an... 

• Suitable for all 10-ton applications for frame machines with 3/8" chain.
• Beautiful bright gold colored finish and heat treated for maximum strength.
• Ultimate strength is 26,400 lbs.- enough for any bo... 

• Suitable for all 10-ton applications for frame machines with 3/8" chain.
• Beautiful bright gold colored finish and heat treated for maximum strength.
• Ultimate strength is 26,400 lbs.- enough for any bo... 

• Suitable for all 10-ton applications for frame machines with 3/8" chain.
• Beautiful bright gold colored finish and heat treated for maximum strength.
• Ultimate strength is 26,400 lbs.- enough for any bo... 

Heat Treated for Maximum Strength

• Suitable for all 10-ton applications for frame machines with 3/8" chain.
• Beautiful bright gold colored finish and heat ... 

• 10 Foot Chain with Clevis Slip Hook
• Suitable for all frame machines with 3/8" chain
• Beautiful bright gold colored finish and heat treated for maximum strength
• Ultimate strength is 26,400 lbs... ... 

• Large "J" hook on one end and "T" & Grab hook on the other end
• Heat treated, gold plated
• Made in U.S.A.

• Large "J" hook on one end and "T" & Grab hook on the other end
• Heat treated, gold plated
• Made in U.S.A.

• Universal tie-down and pull clamp for rocker panels and other hidden or hollow panels
• Fast and easy to use
• 2-ton capacity
• Will straighten: door frames, quarter panels, hoods, ... 

The Mo-Clamp B Clamp is the bodyman's right arm.

Self-Tightening. It grabs 2-1/4" (57 mm) of metal, making it ideal for hard pulls on heavy metal or frame. Original wedge. ... 

The Mo-Clamp JR Clamp is one of Mo-Clamp's original self-tightening clamps.

A must for every body man. 1-1/2" wide bite for aggressive pulling. Original wedge. New angled tooth ... 

A great time saver with the Mo-Clamp Handy Hook.

No chain is too long and no hooks are needed on the chain. Alloy heat-treated steel. Designed for use with 3/8 chain. ... 

Mo-Clamp's new design Tight Opening Clamp has all the same gripping dimension requirements as the old design.

Redesigned and strengthened with our totally new screw drive m... 

The Mo-Clamp Dyna-Mo "W" Clamp is part of the new generation of Mo-Clamps.

Self-Tightening. Wider tooth surface to grab more thin metal without tearing. Drop-forged round wedge to keep ... 

The Mo-Clamp Dyna-Mo "C" Clamp - 0205 is a new generation of Mo-Clamps.

Self-tightening. Great for getting over lips or edges. Drop-forged round wedge to keep the twist out... 

The Mo-Clamp Dyna-Mo Junior is part of a new generation of Mo-Clamps.

Self-tightening. Thin-edged nose for getting into hard-to-reach places. Drop-forged round wedge to keep twi... 

Self-Tightening. Its 1-1/2" (39 mm) throat  clearance, on the Mo-Clamp C Clamp, fits over a flange or frame horn, or around a lip to pull from behind. Original wedge. Original straight cut tooth... 

The Mo-Clamp Frame Rack Unibody Clamp - 4010 has bar holes designed for three ways of pulling, using shackle and oval loop.

Clam... 

The Mo-Clamp (MAC II) Multi-Angle Clamp - 4058 new style features cross-hatch tooth pattern which holds well with less distortion of metal.

Larger pull plate is adjustable and r... 

The Mo-Clamp Sill Hook is one of the handiest tools in the shop for a quick pull almost anywhere.

New round opening allows for pulling with a slip hook. New casting process make... 

For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch.

The Mo-Clamp Tack-N-... 

For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch.

The Tac-N-Pull Plates Kit inclu... 

Use this new hook from Mo-Clamp to pull front hinge pillars, center pillars posts, rear hinge sections or any location where you need a broad, thin pulling surface.

The Mo-Clamp Slim Li... 

These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces.

The Mo-Clamp Dyna-Mo Box Clamp has a severe duty tooth design for aggressive pulling power.

• Gripping Surf... 

Drop forged for strength and reliability!

Use the Mo-Clamp Single Claw Hook as an accessory with draw bars or chain. Use a pair with Triangle or Oval Loop ... 

The Mo-Clamp "J" Hook with chain is an original shipping tie down for ALL vehicles.

Excellent around the frame machine to help hold a frame while diamond is being pulled.
... 

The Mo-Clamp "J" Hook with Grab Hook - 6318 is an original shipping tie down for ALL vehicles.

Excellent around the frame machine to help hold... 

With 3 tons of capacity, the Mo-Clamp Dyna-Mo Corner Clamp- 0307 conforms to the exacting standards of all Mo-Clamp products.

Made from Mo-Clamp Tru-Tuff heat-treated steel alloy,... 

The Numerous Angle Puller allows pulls from any angle.

Just put the bolt through a 1/2 " hole and pull. Use with the Mo-Clamp 2MA Multi Adapter Plate, the Mo-Clamp 3MA Multi A... 

The Mo-Clamp All-Angle Clamp - 4065 is one  of the toughest little clamps Mo-Clamp has ever built.

Both straight pull or right angle with an infinite twist capab... 

The Mo-clamp Double Grab Hook is another time saving tool. Usually several is a good thing.

For quick shortening of a ‚Öú" chain.

Overall Leng... 

The Mo-Clamp Tie Down Hook Cluster - 6325 is designed from the same quality steel as individual hooks and is handy enough to have around in your garage. Locate your "R" "J" "T" and 3/8" easily when you have the tie down hook cluster. The... 

Make your own tool with this severe duty tooth designed clamp. Add side pull bracket when needed. Machine Tooth Design.

• Gripping Surface: 31/2" wide (95 mm)
• Capacity: 5 tons (4,536 kg)
• Hea... 

Mo-Clamp's re-introduced the Tight Opening Clamp because popular demands had to be met so the old design is back. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect f... 

Alloy heat-treated hooks increase pulling options. May be used with#0810 and #0820 Hole Pull Plates to pull, or use in combination with clamps.

• Capacity: 2 tons (1,814 kg)
• Heat Treated Steel.

• Easy-to-use clamps designed for placement on hood/lid strut rods preventing the body component from falling of sagging.
• Great for vehicles and shrouds with weak or dry struts.
• Simply place over strut rod ... 

• #2452 Mo-Clamp 3" Down Pulley and #2567 Mo-Clamp Pulley Block Adapter combined

The Mo-Clamp "A" Clamp with pull ring - 0053 is excellent for gripping narrow seams and ridges.

Hardened steel cross-hatch teeth assure a secure pull. Excellent for use with slide ... 

• Capacity 3 tons
• Design allows for angled and/or uneven pulls
• Can use all 5 different sizes of pull plates in whatever combination required

The Mo-Clamp 3MA Multi Adapter Plate - 2400 is designed for a wide variety of strut towers.

Permits fast hook-ups and pulling in any direction. Allows center strut tower measuremen... 

Use the Mo-Clamp Boltless Strut Tower Puller - 2450 for an easy, fast, reliable method for pulling strut towers.

Developed for strut towers without bolts, to correct chassis dimens... 

Alloy heat-treated hooks increase pulling options. May be used with#0810 and #0820 Hole Pull Plates to pull, or use in combination withclamps. 

• Set includes one each of #3110, #3120, #3130, and #3140.
... 

• Mo-Clamp bolts have special grades of material and are heat treated to specifica... 

The Mo-Clamp Door Post Puller Twister - 5616 is designed to put a twist in your pull with its V-shaped gusset.

There are three positions from which to pull. For use on bol... 

Use in existing holes in frame structures or body panels. Comes with and#35;5626 3/8" Shackle for angle pulls.

• Overall Length: 4" (101mm)
• Capacity: 3 tons (2,722kg)
• Heat Treated Steel. ... 

The Mo-Clamp Chain Locking Fork - 1700 is a handy stopper for chain.

Used to maintain chain tension while adjusting for pulls. Locks chain tight. Heat-treated alloy steel. ... 

The Mo-Clamp GM "R" Hook with Chain is the original shipping tie down for GM vehicles.

Excellent around the frame machine to help hold a frame while diamond is being pulled.

• Double jaw distributes loads over double the surface
• Solid steel construction for durability and strength
• Use for fast easy pulling on rocker panels and other large areas
• Made in U.S.A. ... 

• Fits slide hammers with 3/4 inch threads
• Attach the clamp, screw in the slide hammer, then pull
• Very fast!
• Made in U.S.A.