• General purpose chain shortener
• 3/8" applications
• One grab hook on each end
• 6600 lb. capacity
• Made from steel

• Use for a variety of chain hookups
• 2000 lb. load rating

Mobile - Roll it to where you need it! Stores out of the way when not being used.

The Champ Grappler 10-Ton, 4-Clamp Mobile Frame Straightener has adjustable clamps for length, width and height for all kinds of ve... 

Install the super-efficient and portable Champ 10-Ton Versa-Puller Frame Machine and perform automotive repair jobs with much more precision than ever before. If you are looking to restore a car to its original condition and it requires ... 

All The Capabilities Of A Drive-On Frame-Rack For Thousands Less!

Damage to frames is very common as it is frequent in aut... 

• Double jaw distributes loads over double the surface
• Solid steel construction for durability and strength
• Use for fast easy pulling on rocker panels and other large areas
• Made in U.S.A. ... 

Chain cars to the floor in your auto body shop firmly with the Champ Floor Anchor Pot 1600 and it will help you work efficiently.

Made in the USA with premium quality materials, this anchor pot with a removable chain is capable of... 

Chain cars to the floor in your auto body shop firmly with the Champ Floor Anchor Pot 1600 and it will help you work efficiently.

Made in the USA with premium quality materials, this anchor pot with a removable chain is capable of... 

Chain cars to the floor in your auto body shop firmly with the Champ Floor Anchor Pot 1600 and it will help you work efficiently.

Made in the USA with premium quality materials, this anchor pot with a removable chain is capable of... 

Chain cars to the floor in your auto body shop firmly with the Champ Floor Anchor Pot 1600 and it will help you work efficiently.

Made in the USA with premium quality materials, this anchor pot with a removable chain is capable of... 

Chain cars to the floor in your auto body shop firmly with the Champ Floor Anchor Pot 1600 and it will help you work efficiently.

Made in the USA with premium quality materials, this anchor pot with a removable chain is capable of... 

The Mo-Clamp "W" Clamp is the Super Clamp for the tough jobs.

Self-Tightening. Ultra-wide gripping surface. Grabs 4¼" of metal. Original wedge. Original straight cut tooth des... 

The Mo-Clamp Long Nose Clamp is self-tightening and includes the original wedge.

Cross-hatch tooth design, spring loaded for easy open... 

The Mo-Clamp Baby Box Clamp - 0670 is self-tightening. Great for single-lip flanges and inside frame horns.

Original wedge; cross- hatch tooth design; spring-loaded for easy openin... 

The Mo-Clamp Big Mouth Clamp - 0680 is self-tightening. A perfect solution for hard-to-get-to areas. Great where large opening is needed.

Original wedge; cross-hatch tooth... 

The Mo-Clamp Versa Hook is a versatile tool used as an outer track tie-down to secure vehicles during pulls.

It is used as a pulling device for rocker pane... 

The Mo-Clamp 4-Way Pull clamp has recessed pockets to hold bolts stationary for easy tightening.

Includes Oval Loop.

Gripping Surface: 4" wide (102 mm), 3/4 " deep (... 

The Mo-Clamp 3-Way Pull Clamp - 4030 has recessed pockets to hold bolts stationary for easy tightening.

Gripping Surface: 4" wide (102 mm), 1/2 " deep (19 mm)
Overall Length: 8" (... 

The Mo-Clamp "G" Clamp helps you pull using various angles and makes pulling considerably easier. With a throat opening of 4 inches, the G clamp allows you to get around, behind and over the damage pretty easily. The G-Clamp brings in mo... 

The Mo-Clamp Down Pull Assembly can be used for straight down or angled pulling. Works with pulling towers and bench systems.

Large 5 inch wheel prevents undue chain wear. Secured ... 

The reversible Mo-Clamp Mini-Bite with pull ring is designed to get around lips and corners for strong pulls and to pull narrow seams and lips. Cross-hatch tooth design assures a firm grip.
... 

Use the Mo-Clamp Regular Deep Hook Set for fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places.

Small Bracket (2" x 3") and Large Bracket... 

Try the Mo-Clamp Jumbo Deep Hook Set - 6410 for fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places.

Small Bracket (2" x 3") and Large Bracket (2... 

Use the Mo-Clamp Mini Deep Hook Set for fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places.

Includes Horizontal Bracket and Vertical Bra... 

The Mo-Clamp Angle Bite Clamp - is a self-cleaning, self-tightening clamp with a gator tooth design and a 45-degree head for those hard-to-pull areas, such as the Mercedes 107 front chassis rail.

Drop... 

The A™ Clamp grips narrow seams and ridges. Hardened steel cross-hatch teeth assure a secure pull. Excellent for use with slide hammer. Clamp has raised "bolt stoppers" to hold bolts stationary, for easy, one-handed tighteni... 

Spring loaded for easy opening. Includes Oval Loop for use with Slip Hook for easy hook-up. For light sheet metal in those tight places. Cross-hatch tooth design for an agressive bite. Clamp has raised "ears" to hold bolts stationar... 

• Spring-loaded operation makes clamp easier to use.
• Pivoting, gripping heads allow for a secure grip on uneven surfaces.
• Retaining bolt holds clamp in place.
• Heat-treated, investment... 

Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on almost any surface. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws c... 

Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on most surfaces. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be... 

A must for pulling on box rails with welded-on bumper flanges. Reaches around protruding metal to get a grip on hard-to-reach surfaces. Its heat-treated jaws grip a substaintial area for pulls from several directions and angles. Gator to... 

Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. 

Use the Mo-Clamo Lip Grip with Side Pull as a sandwich clamp on quarter panels or floor sections. The chain loop permits pull... 

Chain too long? Make it shorter! Chain to short? Make it longer!

The Mo-Clamp Handy Link is made out of alloy heat-treated steel. Designed for use with 3/8" chain. 

Overall Length: 6 1/2" (165... 

The Chain Spread Bar enables the bodyman to make pulls around box rails or other obstacles, while maintaining the distance between pulling clamps. 

• Overall Length: 11" (280 mm)
• Capacity: 5 tons (4,536 kg... 

• Use two clamps side by side for more pull.
• Can be used with two #1300 Sill Hooks.
• Designed for use with 3/8" chain.

The Mo-Clamp Panel Puller is light and easy to use with a slide hammer or pulling post.

Use the Panel Puller on fender openings, deck lids, door posts and other openings. Heat-treated alloy steel. ... 

Design allows technician to pull wider areas from behind door posts, pillars and rocker panels. Also gives technician the ability to get behind core supports and other tough areas with a wider pulling surface.

• Overall le... 

Design allows technician to pull wider areas from behind door posts, pillars and rocker panels. Also gives technician the ability to get behind core supports and other tough areas with a wider pulling surface.

• Overall le... 

• The Junior Versa Hook is designed smaller to allow access to tight areas.
• End is only 13/4" wide for pulling on rocker panels, door posts, etc. 
• Back lip is used for a tie-down to secure the ve... 

The Mo-Clamp Pull Ring - 1500 for the 2100 2MA Adapter Plate for unlimited body and frame pulls, such as frame horns, brackets, cowls, etc. 

Has recessed pockets to hold bolts stationary for easy, one... 

The Mo-Clamp Multi-Purpose Anchor Hook is a valuable, small hook device for use on both conventional frames and unitized bodies.

The different ends are used for a variety of pulls and anchorin... 

A handy chain hook-up pulling plate for making double pulls. The special design allows for both wide or narrow pulls. Double pulls, using multiple self-tightening clamps, can be made from the same pulling tower or pulling post. Features ... 

Quick tie-down for track systems or back anchoring on frame racks.

The lip on the Mo-Clamp Track Hook can be used for pulling damaged areas; varied multiple uses for chain lengthening or shortening. Slot c... 

The Mo-Clamp Inline Slider is part of the new generation of Mo-Clamps.

Self-tightening. Made of heat- treated Tru-Tuff© steel alloy. Grabs on to flanges and provides a sure grip while pulling "in-line... 

Four hole-size selection for quick hook-ups in existing frame holes for pulling of damaged frames. Uses Mo-Clamp's easy chain hook-up system. Hole sizes: 1 7/8" (48 mm), 1 5/8" (41 mm), 1" (25 mm), 7/8" (22 mm). 

• Ov... 

The Mo-Clamp 2MA Multi Adapter Plate - 2100 is designed for most foreign and domestic vehicles with Mac- Pherson suspension, the 2MA fits approximately 95% of the various strut bolt patterns.

The 2MA Plate... 

The Radiator Core Support Puller is a simple to operate two piece tool designed expressly for radiator core support brackets and body/cab mount brackets on full frame vehicles.

The tool addresses severa... 

• Includes 2 ea. 1/2" shackles
• 13" wide gripping surface
• 6" overall length
• 6-ton ... 

• Jack pin adapters for early and late models (two different sizes)
• 14" overall length
• 6 ton c... 

• One pair Frame Rack Dyna-mo jaws with 7" draw bar, one side pull bracket, shackle and oval loop. 
• Raised "ears" to hold bolt in place while tightening. 
• Machine tooth design.
• Grippin... 

• Two pair Frame Rack Dyna-Mo jaws with 12" draw bar, one side pull bracket, shackle and oval loop. 
• Raised "ears" to hold bolt in place while tightening. 
• Machine tooth design.
• Grippi... 

Clamp has recessed pockets to hold bolts stationary for easy tightening. 

• Gripping Surface: 4" wide (102 mm), 1/2 " deep (19 mm)
• Overall Length: 5" (127 mm)
• Capacity: 6 tons (5,443 kg)
... 

• 14" overall length
• 6-ton capacity
• Heat treated steel

Bolt to surface for a 90-degree straight pull or use with the Mo-Clamp 3-Way Pull Clamp, a pair of Mo-Clamp Frame Rack Jaws or a Mo-Clamp Frame Rack Unibody Clamp.

Overall Length: 6" (152 mm)
Wei... 

• Use with #7282 Chain Loop and others for solid hookup 
• Weight: 1 lb, capacity: 3 tons 

Great for bolting to a frame, unibody rail or to other places to make a secure pull. Each bar has a combination of hole patterns to facilitate bolting to a vehicle. May be used in conjunction with various accessory items for specialized ... 

The Mo-Clamp Many Hole Wide Draw Bar - 4048 is great for bolting to a frame, unibody rail or to other places to make a secure pull.

Each bar has a combination of hole patterns to facilitate bolting to a ve... 

Allows easy access to the bends and waves resulting from frame straightening. Helps in achieving the "pre-accident condition" look. Eliminates unsightly hammer marks of the frame. Designed for c-frame construction. Two different angles t... 

The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and easier. Hardened gator teeth firmly grip narror seams and pinch welds. Clamp has... 

The Mo-Clamp Narrow Bar with Single Claw - 4056 is great for bolting to a frame, unibody rail or to other places to make a secure pull.

Each bar has a combination of hole patterns to facilitate bolting to ... 

Makes possible one- or two-directional pulling and can be used in a confined area. Gator teeth grip metal firmly. 

• Gripping Surface: 2" wide (51 mm)
• Overall Length: 8 1/2" (21 mm)
• Capacity: 3... 

Use the Mo-Clamp Double Claw Hook as an accessory with draw bars or chain. Use a pair with Triangle or Oval Loop as a chain sorter, double hook, or bumper hook.

Designed for use with 3/8" chain. 

Two #4110 Single Claw Hooks with #4052 Triangle. Grabs bumpers or panels. Easy 3/8" chain connection. Triangle allows for center pull. 

• Overall Length: 10" (254 mm)
• Capacity: 5 tons (4,536 kg)
... 

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of 3/8" chain included.

• Overall Length: 24" (610 mm)
• Working Load Limit: 6,600 lbs

Working Load Limit: Refers to the max... 

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of 3/8" chain included.

• Overall Length: 25" (635 mm)
• Working Load Limit: 6,600 lbs
• Heat Treated Steel. 

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of 3/8" chain included.

• Overall Length: 25 1/4" (654 mm)
• Working Load Limit: 6,600 lbs
• Heat Treated Steel. 
... 

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of 3/8" chain included.

• Overall Length: 26 1/2" (672 mm)
• Working Load Limit: 6,600 lbs
• Heat Treated Steel. 
... 

• A bend of 30 degrees makes all the difference when hooking up this tough guy onto a frme rail and making corrections.
• Combined with swivel holes under the jaws the right angle for the job at hand is assured.
... 

• #5011 - Tool Board with Hooks
• #0100 - B Clamp
• #0200 - C Clamp... 

Tool Board ONLY.

Does not include any tools.

Keep your tools organized and in good condition with handy Mo-Clamp tool board. 

Tools are sold separately.

Board has spa... 

• Replacement bolt set for Mo-Clamp 2518 Model C Clamp

Many different shop uses. Use in correction of strut towers. For attachment to existing bolt holes. Designed for use with 3/8" chain. 

• Overall Length: 19" (483mm)
• Capacity: 2 tons (1,814kg)
• H... 

Straighten frame rails in about 80-percent of front-end damage cases.

Inserted into the frame rail pocket, the Mo-Clamp Mo-Block Dolly straightens the high strength, low-alloy metal easily and qu... 

Great for Spreading or Pushing Out Damaged Body Panels

• High impact polycarbonate plastic. 
• Used with Mo-Block Dolly for straightening out the rail pocket.

The Mo-Clamp Jumbo "G" Clamp - 5802 has a throat opening of 7 inches to get over, around and behind the damage.

Multiple holes allow for various angle pulls. Includes swivel pad. Optional (sold separately)... 

Double your pulling power. Use the Mo-Clamp Pulley Block Adapter with the Mo-Clamp Pull Assembly to make a Snap Block Pulley. 

Overall Length: 8 1/2" (210mm)
Weight: 4 lbs (1.81kg)
Capacity: 5 ... 

• Smaller down pulley offers the same benefits as the 5" down pulley
• Use for straight down or angled pulling
• Made of Mo-Clamp Tru-Tuff steel alloy

Weld-on pinch weld brackets. 12" brackets for welding to bottom of automobiles without pinch welds. Works with most pinch weld holding systems. Allows for hook-up to a frame rack or hold-down system. 

• Overall Length... 

For use with your Selsun™  Air Jack. Unique formed shape gives the Saddle Mate superior strength. Custom die form to fit 99-percent of all automobiles. 

• Overall Length: 10" (255mm)
• Heat Treate... 

Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy. 

• Overall Length: 12" (305mm)
• Capacity: 5 tons (4... 

Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy. 

• Overall Length: 12" (305mm)
• Capacity: 5 tons (4... 

Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy. 

• Overall Length: 10.5" (267mm)
• Capacity: 5 tons ... 

Working Load Limit: 5,500 lbs
Weight: 2 lbs (.91kg)
Capacity: 7 tons (6,350kg)  

The 3/8" Clevis Slip Hook is made out of heat treated steel.

Made in the U.S.A

Protects finish from mars. With inside Mo-Guard protective covering for extra-long life.

• Overall Length: 60" (1,525mm)
• Width: 3" (76mm)
• Vertical Capacity: 2.5 tons (2,267kg)
• Choke Capa... 

Use as a safeguard against separation, breakage of temporary welds or clamp failure. Not meant for pulling. Use for restraint of chain and clamps only. 

• Overall Length: 60" (1,524mm)
• Width: 1" (25mm)... 

Use as a safeguard against separation, breakage of temporary welds or clamp failure. Not meant for pulling. Use for restraint of chain and clamps only. 

• Overall Length: 30" (762mm)
• Width: 1" (25mm)
... 

The Mo-Clamp GM "R" Hook with Grab Hook is the original shipping tie down for GM vehicles.

Excellent around the frame machine to help hold a frame while diamond is being pulled.

5/16" (7.94mm) Chai... 

The Mo-Clamp 6311 Ford "T" Hook with chain is the original shipping tie down for Ford vehicles.

Excellent around the frame machine to help hold a frame while diamond is being pulled.

3/8" Cha... 

The Mo-Clamp Ford "T" Hook with Grab Hook - 6313 is an original shipping tie down for Ford vehicles.

Excellent around the frame machine to help hold a frame while diamond is being pulled.

5/... 

• Like the Mo-Clamp Tie down Hook Cluster 6325 but with a longer chain to make hook-ups on wreckers and other vehicles easier
• 3/8" grade 70 chain
• 4 ton capacity
• Includes 4 of the most used hooks... 

Mo-Flex slings are extremely flexible to conform more easily to the curve of surfaces being pulled. The protective pad slips around the sling to provide protection to the sling when wrapped around sharp objects. Two lengths to choose fro... 

For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. #210030 Small Bracket (2" x 3") and #210020 Large Bracket (2" x 9") included. 

• Overall Length: 21" (533mm)
• Thro... 

Tightens chain when used with a #1700 Chain Locking Fork on frame racks and other applications. 

• Overall Length: 12" (305mm)
• Capacity: 6 tons (5,443kg)
• Heat Treated Steel.

• Here's the answer to your problem of having to reach around a door pillar and not crush it when pulling on a side hit.
• Allow a good, even pull by wrapping this strap a couple or three times around a pillar, strut, lo... 

Tram Instruments are a versatile and indispensable tool for determining collision damage to unibody cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mech... 

The Mo-Clamp Baby Tram with Case helps to check dimensions between control points on both suspension and mechanical components. With this tool, you can easily check contours as well, by comparing measurements between the sides of the veh... 

Tram Instruments are a versatile and indispensable tool for determining collision damage to unibody cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mech... 

Designed to fit all Mo-Clamp vertical scales on all centerline gauges in our product line.  Allows hanging of centerline gauges on most pinch welds on underbody of today's vehicles. Will make sure you are centered to create an oppor... 

The Mo-Clamp Deluxe Centerline Gauge is made of rugged, lightweight cast aluminum, and measures centerlines for both domestic and foreign vehicles. It comes with recessed tapes which enable efficient reading and durability. The Mo-Clamp ... 

• Determines centerline and locates lower control arm centerline position
• Measurements are in metric... 

• 1 4-Way Leg
• 1 Bolt
• 1 Washer
• Replacement parts for Mo-Clamp #2100 Multi-Adapter Plate

Get ready for an easy and cost-saving solution for your frame rail repairs with The Rail Saver. Designed by an auto body technician to help fellow auto body technicians, the rail saver repairs frame rails quickly, easily and effectively.... 

Tram Instruments are a versatile and indispensable tool for determining collision damage to unibody cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mech... 

For hooking into clamps or pull rings. Fast hook-up to any section of 3/8" chain.

• Overall Length: 9-1/2" (241 mm)
• Weight: 3 lbs (1.36 kg)
• Capacity: 7 tons (6,350 kg)
• Heat Treated Steel... 

Protect finish with 30" sling with sewn loops.

• Overall Length: 30" (762mm)
• Width: 3" (78mm) Weight: 1 lb (.45kg)
• Vertical Capacity: 2.5 tons (2,268kg)
• Choke Capacity: 2 tons (1,814kg) ...