Clean several types of reactive adhesives from a variety of substrates quickly and efficiently with the 3M General Purpose Adhesive Cleaner. This cleaner can effectively remove silicone polish, tar, oil, epoxies, tree sap, light paint ov... 

• NIOSH approved for environments containing certain oil and non-oil based particles.
• Use with 3M Respirators 5000 Series or 3M Cartridges 6000 Series, and 3M Filter Retainer 501.
• 3M Disposable Organic Vap... 

3M Full-Face Respirator Mask for Automotive Painting

The 3M Full Facepiece Respirator Organic Vapor / P95 Packout is the most recommended respirator for spray paint applications in ... 

The 3M Marson Platinum Plus Premium Gold Lightweight Filler is a stain-free, tack-free, super premium lightweight filler. This product has a smooth, creamy texture that provides perfect adhesion to steel, aluminum, fiberglass, cured Epox... 

If you have been looking for a product that will make paint, rust and weld removal easy, then the 3M Green Corps Roloc 3" Discs are the right choice. It is essential to remove old paint, rust, and welding spots before starting a fresh pa... 

• Repair damaged bumpers and re-build tabs
• Can also be used to bond many dissimilar materials such as plastic, fiberglass and metal
• 200 mL
• Work Time: 50 seconds
• Paint Time: 15 minute... 

• 16" x 2-3/4" Hand File Board
• Use with abrasives sheets for leveling of repair area or following contours
• Made of a sturdy, durable, high strength material
• Embossed rubber face which all... 

• Specially made for use with 3M Stikit Discs
• Vinyl pad face provides good disc adhesion yet allows easy disc removal
• Pad is lightweight, shock-resistant and well-balanced
• Made with a tough, ... 

The 3M Hookit SBS 7" Backup Pad will allow you to attach, remove and center abrasive compounding or polishing pads for quicker work. The ability to change compounding or polishing pads quickly will positively impact your paint job and wi... 

• Utilizes a 3M patented convoluted foam face.
• Micro fine 2000 grade scratches are effectively removed from any automotive paint finish leaving an extremely fine finish.
• Easily attaches to 3M Hook-It Back... 

You get swirl-free paint finishes after removing fine paint surface defects with the 3M Perfect-It 8" Foam Polishing Pad. This single-sided gray polishing pad has a convoluted surface and a flat back design. It is suitable for use with P... 

Sand automobile surfaces easily with the 3M Hookit 6" Disc Pad. The tapered edge makes sanding on contoured surfaces effortless, whether at high or low speeds. The foam body is tough and long lasting. A medium density foam construction o... 

The 3M Hookit Soft Interface Pads are designed for use on 3M Hookit abrasives, and help to improve abrasive cuts and finishes. They reduce vibration on dual action random orbital sanders, and work best with the 3M Hookit disc pads. The h... 

• Designed for spreading body and fiberglass fillers, finishing putties, and resins
• 50 per box
• Sharp edge
• Flexible
• Durable
• Easy to clean
• Cured filler pops off... 

The 3M Automix Flexible Part Repair helps in fixing flexible and semi-rigid plastic parts. This two-part epoxy material provides excellent sanding properties and flexibility. It is compatible with common plastics and for best results Use... 

The 3M Yellow Masking Tape 388N is a professional grade automotive painting tape designed to meet the needs of today's collision repair shops!

• Bends ands stretches to follow curved body lines
• Flexible and... 

The 3M S.M.A.R.T. Bumper Stand is designed to securely hold plastic bumper facias (or bumper covers) in place during the repair and coating process. The product features two high-strength spring clamps with dowel pins for positiv... 

Works Great with Waterborne Paint!

Shield your vehicle from paint bleed-through and overspray during the painting process with 3M Plastic Sheeting. It is a high-density, translucent polypropylene film that clings ... 

3M Scotchblok Masking Paper provides excellent resistance to paint solvents, urethanes, base coats and clear coats. Has a polycoated backing to prevent solvent bleed-through. Offers the best penetration resistance from all solvents used... 

• For use on all 3M Low Maintenance and durable Facepiece Respirators with bayonet style attachment.
• Trapezoid design allows for low swept back positioning of the cartridge for unobstructed vision.
• Filters ... 

• 25 Peel Off Lens Covers for - 3M Full Facepiece Respirator - 07162
• Replaceable protective covering for lens to protect from overspray and scratches

**Respirators are non-returnable**

• Lightweight, with a swept-back cartridge and filter design for unobstructed vision and excellent balance it is the benchmark in low ... 

3M 07333 Adheres to a Wide Variety of Properly Prepared Automotive Substrates Including Steel & Aluminum

This 3M structural adhesive is a perfect t... 

The 3M 07447 Scotch-Brite Maroon Pads are perfect for scuffing surfaces before painting and applying primer surfacers. With the Scotch-Brite name on it, these maroon scuff pads are made of nylon web. They will not rust like steel wool pl... 

• Fast-drying black adhesive used for bonding and sealing weather stripping.
• Also an excellent adhesive for new EPDM weather stripping.
• Easy to apply.
• Remains flexible and waterproof.
... 

Two-part epoxy used to bond plastics, steel, aluminum, SMC, and FRP (traditional fiberglass)

• Primary Uses - replace quarter panels, roofs, box sides, van si... 

Large Diameter for Easy Dispensing

• Designed for use with 200 mL and 400 mL cartridges
• Larger diameter allows for easier dispensing
• 6 nozzles per bag

Here's one of the strongest sealants available for general sealing of various vehicle parts: 3M Automix He... 

The 3M Manual 200 mL Cartridge Applicator Gun is designed for the 3M two-part cartridge range, and it enables mixing two pack adhesives to the correct consistency. This high-performance applicator gun does not require any measurement. It... 

3M Single-Step Primer is a polyurethane based primer that has superior adhesion to glass, metal, and PVC parts. This high-quality primer is an important part of the popular 3M Gla... 

The 3M Fast Cure Auto Glass Urethane is a highly viscose, single component moisture curing urethane adhesive. It is designed specifically for stationary glass attachments and for the bonding of windshields. This adhesive from 3M exceeds ... 

3M Auto Glass Urethane Windshield Adhesive is a black, medium viscosity, one-part moisture curing urethane adhesive. It provides high strength material designed to bond and seal vehicle windshields and stationary glasses. It is easy to u... 

The 3M Sound Deadening Pads are best applied on trunk floors, doors, deck lids and other body panels to negate noise and vibration. These self-adhesive pads help in effectively suppressing noise and vibration from the vehicle panels, eng... 

Once you use the 3M Body Schutz Rubberized Coating Black, you may not want to use any other undercoating products in the market. With a high-build capacity that can match up to any thickness and a superior spray pattern, this pro... 

When you are looking for a premium undercoating in a convenient aerosol can, a great option is 3M Underseal Rubberized Undercoating Black. It is a strong, high-performance undercoating that provides sound deadening and rust proofing bene... 

Prevents New Rust

The Mar-Hyde line of products from 3M caters to the needs of the automotive refinishing industry. Convert rust into a hard, black primer seal... 

Produces Better Overall Finishes with Deeper Color and Gloss

The ever-improving Perfect-It finishing system has a new tool, Perfect-It EX Rubbing Compound. EX is designed to handle better in EXtreme conditions li... 

If you have been looking for a product that will make paint, rust and weld removal easy, then the 3M Green Corps Roloc 2" Discs are the right choice. It is essential to remove old paint, rust, and welding spots before starting a fresh pa... 

Designed to hold up to a heavy workload and are ideally suited for such applications as grinding door skins, coating removal, paint removal, gasket removal, rust and weld removal, general metal work, and clear coat applications on metal,... 

• Used for cutting auto body sheet metal, frame rails, clamps and rusted bolts.
• For use on utility type cut-off tools.
• 3" x 1/16" x 3/8"

• Ideal for cutting spot welds and grinding into hard-to-reach places.
• 3" x 3/16" x 3/8"
• Coarse grade grinding discs
• Aluminum oxide abrasive mineral
• Pack of 5

Great for Jamb Masking

3M Soft Edge Foam Masking Tape PLUS is a versatile masking product designed to be applied to moving parts such as doors, hoods or deck li... 

**Respirators are non-returnable**

You can use the multi-faceted 3M Half Facepiece Respirators when you are performing tasks such as grinding, sanding, buffing, welding, and asb... 

• Replacement filters for half facepiece respirator (M or L).
• NIOSH approved for environments containing certain oil and non-oil based particles.
• Use with 3M Facepieces 6000 Series or 3M Facepieces... 

• Removes high loading materials fast and doesn't load
• Great for removing rubberized undercoating, seam sealer, rust & paint while maintaining product life
• Flexible bristles use less pressure than wire ... 

Stays Strong in Extreme Temperatures

• Strong, rapid bonding, convenient to use adhesive.
• Good adhesion to rubber weather stripping, vinyl, metal, glass,... 

Use to seal hem flanges, door jambs and deck lid applications

To get a seam sealer on correctly is among the most important jobs you will ever do when restoring... 

3M 08609 Windo-Weld Super Fast is a fast-acting adhesive/sealant used for flush mounted and bonded windshield or backlite and sidelite replacements. This black, odorless 3M window weld product is available in a 10 oz. cartridge. It is de... 

• Hard cup that supports and holds the PPS mini flexible liner, part number 0402.
• If filled to the top, this cup will hold 6 fl oz.
• 2 Cups and Collars per box.

PPS™ reduces cleaning solv... 

• Air flow control valve for use with the 3M Accuspray Spray Gun Model HG18, part number 16570
• Gauge face is color-coded to indicate appropriate air pressure settings

PPS™ Series 2.0 Large Size Kit

(50) lids with either 200 micron filters
(50) liners, (32) sealing plugs
(1) standard hard cup (28 fl oz, 850 mL)

3M PPS Series 2.0 Spray Cup System is the next generation, highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction (360° spray rotation) and sealing and protecting coatings wh... 

PPS™ Series 2.0 Large Size Kit

(50) lids with either 125 micron filters
(50) liners, (32) sealing plugs
(1) standard hard cup (28 fl oz, 850 mL)

The 3M High Power Spray Gun Cleaner is a low VOC aerosol specifically formulated for removing waterborne and solvent-based coatings from metals, plastic and composite surfaces. This spray gun cleaner meets SCAQMD Rule 1171 requirements.... 

This premium Cut-off wheel contains precision shaped grain for ultra fast cool cutting action and long life. Auto body technicians are impressed by the outstanding cutting performance on both mild steel and ultra high strength steel. ... 

• Constructed with precision shaped grain that cuts faster and runs cooler
• Last longer to get jobs done faster using less abrasives
• Triangular-shaped ceramic grains of Cubitronâ„¢ II are el... 

• Disposable plastic seat cover designed to protect Automotive seats during maintenance and repair
• High friction underside that grips the seat and a slippery top surface that allows the user to slide from seat.
... 

3M™ Speedglas™ 100 Welding Helmets deliver outstanding protection, comfort and performance with distinctive graphic designs. Welders can benefit from its excellent optical quality and reliable light-to-dark switching at a hig... 

Green Corps products are made with a blend of abrasives including 3M's high performance ceramic abrasive grain which provides increased abrasive life and a faster cut rate when used on plastic filler.

• E weight paper backing... 

Use for scuffing the blend area prior to painting. Suggested backup pad 05776 and 05777 interface pad

Benefits and Features:

• Performance abrasive disc with Hookit attachment
• Preparing blen... 

3M 03609 Super Strength Molding Tape

• Ideal for attaching vehicle body side moldings, trim and emblems.
• Strong bonding and easy to use.
• Cut to size, no mess.
• 1/2" x 5ft Roll<... 

Heavy Duty Duct Tape

• 2in x 60 yd roll
• Economy grade duct tape
• Tears easily and cleanly
• Polyethylene coated cloth ba... 

3M Control-Flow Seam Sealer uses two part urethane technology to provide a toughflexible material for the sealing of joints on primed or painted substrates such as steel oraluminum enclosures. Typical product uses include automotive "roo... 

Versatile aluminum oxide abrasive roll can be used on metal, wood, and plastic

• An aluminum oxide abrasive product sheet constructed on a J weight, durable cloth backing
• Strips can be torn to size and wound around... 

• Use for scuffing the blend area prior to painting
• Precise hole design for great life and dust extraction
• Fast cutting and long lasting
• Clears out more dust with less disc loading
• S... 

Heavy weight backing and unique premium mineral blend make theseproducts extremely durable. Open coat resists loading when sanding freshbody filler.

3M's fastest cutting, longest lasting abrasive for saving labor costs and improvin... 

• Levels orange peel, dust nibs or paint runs in all types of automotive paints
• Appropriate for light sanding on refinish lacquer
• Faster and easier to use than scuffing pads
• Removes paint run... 

• Part of the 3M Perfect-It Paint Finishing System for high gloss and deep color paint finishes
• Ideal for refining sand scratches to help reduce the amount of time spent compounding
• Patterned, precise miner... 

• Clean sanding hole design
• Hookit attachment
... 

Use these 180+ grade discs for sanding plastic filler, rough featheredging or final sanding step before priming

• Long lasti... 

Designed for power sanding, each 6 inch disc with Stikit attachment canbe easily attached to and used on a dual action orbital sander.

• 400 grit sandpaper used to refine 320 scratches in primer
• 320 grit sandp... 

Designed for power sanding, each 6 inch disc with Stikit attachment canbe easily attached to and used on a dual action orbital sander. During Stage 1 of the 3M Body Repair System use the 40 grit discs to quicklystrip paint from metal, p... 

Designed for power sanding, each 8 inch disc with Stikit™ attachment can be easily attached to and used on an 8” dual action sander. During Stage 1 of the 3M Body Repair System use the 40 grit discs to quickly strip paint fro... 

Designed for automotive sanding.

• File sheets quickly strip paint from metal, plastic or fiberglass surfaces
• Blend of minerals deliver a faster cut rate and increased durability
• Also ... 

• File sheets quickly strip paint from metal, plastic or fiberglass surfaces
• Blend of minerals deliver a faster cut rate and increased durability
• Applications include weld removal and stripping hard-to-reach ... 

Combines the cut of a compounding pad and the finish of a polishing pad

• Eliminates compounding when used as part of the 3M Perfect-It 1-Step Paint Finishing system
• Tapered edge protects backi... 

Combines the cut of a compounding pad and the finish of a polishing pad

• Eliminates compounding when used as part of the 3M Perfect-It 1-Step Paint Finishing system
• Tapered edge protects backi... 

Ideal for Hand Sanding Applications

3M Flexible Abrasive Hookit Hand Sheets are ideal for hand sanding applications including primer sanding, blend preparati... 

3M Flexible Abrasive Hookit Discs are ideal for applications including primer sanding, blend preparation and paint finishing. They provide long disc life with excellent cut and finish performance while providing high flexibility and conf... 

Solve a variety of challenges, including floor and safety marking, color coding and industrial applications with our durable 3M Vinyl Tape 471. Designed to resist wear, scrapes and moisture, this long-lasting tape is available in an arra... 

The Scotch-Brite General Purpose Hand Pad combines flexibility with effective cutting action and precise hand control to accomplish tough cleaning jobs or produce fine finishing results, use after use. Very fine grade aluminum oxide abra... 

• 3M Static Mixing Nozzle is a cascade mix/meter nozzle for an easy squeeze of adhesive right on target
• Engineered for use with 3M 50mL cartridges.
• A high performance static mixing nozzle speciall... 

Effectively Remove Reactive Adhesives
3M™ Specialty Adhesive Remover is a solvent-based specialty adhesive remover is designed to remove reactive adhesives from a variety of substrates. Reactive adhesiv... 

Provide solid adhesion to an amazing variety of plastic and metal substrates in the automobile field with the 3M Automix Panel Bonding Adhesive - 08115.

Being a two-part epoxy adhesive, it can give you better work-time and performa... 

• Stick-on version of 3M™ Scotchmate™ hook and loop attachment system
• Performs well up to 120° F continuously or 158° intermittently
• Adhesive backing adheres instantly to most surface... 

Stiff fiber backing and a strong resin bond lend this disc long life and tear-resistance

• 3M Cubitron II Fibre Discs are engineered to cut faster, coole... 

• Safely remove over-spray and paint contaminates
• Can be used effectively on paint, glass and chrome when used with a water-based lubricant
• Recommended for use in removing contaminants such as rail dust, pa... 

• Part of the 3M Perfect-It Paint Finishing System for high gloss and deep color paint finishes
• Ideal for refining sand scratches to help reduce the amount of time spent compounding
• Patterned, precise miner... 

Delivers best-in-class performance at every stage of paint prep and body repair. Premium aluminum oxide mineral abrasive is blended with ceramic grain for a full range of automotive sanding applications. Our multi-hole discs feature a sp... 

The 3M Green Corps abrasive belts are designed to be used for spotweld and hem flange removal as well as grinding in other tight areas.

• Durable 3M Green Corps abrasive belt for great grinding performance and belt life ... 

• 3M™ Cable Ties are molded from 6/6 nylon and are available in a variety of sizes and styles, including weather resistant black for outdoor use
• Type: General Use
• Tensile Strength: Light Heavy... 

Translucent liner makes precise placement easier

• Designed to lift the molding from the vehicle and protect the backside from paint, allowing complete paint coverage under the molding.
• Works... 

• Dry sanding only on machine or by hand
• Use for stripping paint to metal, shaping and sanding plastic filler
• For non-critical, short-term application
• Open coat resists loading on soft mat... 

A light J-weight cloth abrasive that's great for general maintenance work. This closed coat aluminum oxide abrasive comes in a range of grades for common applications like repairing metal finishes, removing rust, deburring, blending and ... 

• Formulated to clean fuel injectors on gasoline engines
• Blend of high octane fuel and solvents, designed to run the engine during the cleaning procedure while cleaning the injectors as the cleaner passes through... 

Green Corps products are made with a blend of abrasives including 3M's high performance ceramic abrasive grain which provides increased abrasive life and a faster cut rate when used on plastic filler.

• E weight paper backin... 

No Hole Aluminum Oxide Abrasive Sheets

• Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal
... 

• Grades available for stripping paint down to bare metal, shaping, sanding plastic filler, removal of coarser scratches in body filler and scratch refinement of bare metal.
• For use with air files or hand boards.
... 

• Hook & Loop attachment system
• 50 discs per box
• For use in scuff sanding before painting
• To remove runs, dust nibs & excess orange peel from top coat finishes

... 

• Gives, uniform consistent finishes
• 3" Hookit discs
• Great for fine feather edging
• Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal.
... 

• Constructed of a high-performance aluminum oxide mineral strongly bonded to a smooth film backing.
• Great for leveling orange peel, dust nibs and paint runs from topcoat
• Hookit Attachment
• T... 

• A convenient hook-and-loop attachment system for easy attachment to and removal from the dual action pad face.
• The fast cutting, long lasting abrasive construction that enables the user to obtain maximum usage of eac... 

3M's durable, reliable and economical mineral abrasive saves material costs while delivering dependable results in collision repair. Aluminum oxide is popular among collision repair professionals because of its fast cut-rate and long lif... 

An economical line of abrasive products to meet all of your shop needs.

Features fast-cutting, long-lasting aluminum oxide mineral abrasive. Aluminum oxide is popular among collision repair professionals because o... 

An economical line of abrasive products to meet all of your shop needs.

These discs are ideal for standard jobs such as filler shaping, featheredging, paint prep and finish. The Stikit attachment makes disc change... 

• A reattacheable abrasive disc used for blend panel and paint preparation. 7 Hole construction allows for dust free or non-dust free use
• Abrasive Backing Type: Paper
• Abrasive Backing Weight: A Weig... 

Get double the strength of ordinary fillers and waterproof your repair jobs by using the 3M-Marson Mar-Glass Short Stra... 

Made of aluminum oxide to provide strength and durability

• Fast cutting and long lasting to increase productivity
• Re-attachable fastening system to extend disc life through reuse
• Eas... 

A reattacheable abrasive disc used for color sanding and paint finishing.

• Standard abrasive disc with Hookit attachment
• Removing dust nibs and texture matching orange peel
• Suggested back up pad PN05... 

An economical line of abrasive products to meet all of your shop needs.

• Fast cutting and long lasting to increase productivity
• Re-attachable fastening system to extend disc life through reuse... 

• Available in 400, 320, 220, 180, 150 & 80 Grade
• Use for fine featheredging or last final sanding step before priming.
• Great for featheredging and Primer Sanding
• Durable and longer lastin... 

An economical line of abrasive products to meet all of your shop needs.

• Fast cutting and long lasting to increase productivity
• Pressure Sensitive Adhesive for easy attachment
... 

• Performance brake rotor surface conditioning disc w... 

• Available in 320, 180 andamp; 150 Grade
• Durable and longer lasting disc product
• Precision coated with high quality minerals and resins to deliver longer-lasting discs that cut through a variety of surfaces... 

These products are designed to provide productivity in a variety of applications from express repair to larger body repair. Use the coarser products for sanding and featheredging filler and putties, and the finer grades for further refin... 

Used for paint removal and metal grinding

• Can be mounted either facing toward or away from operator
• Discs are trimmable which keeps edges fresh and minimizes wasted material
• Use... 

These products are designed to provide productivity in a variey of applications from express repair to larger body repair. Use the coarser products for sanding and featheredging filler and putties, and the finer grades for further refine... 

• Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal
• precision coated with high quality minerals and resins to deliver longer-lasting discs
• Can cut throu... 

3M Gold Abrasives are the standard that shops have turned to for quality, performance and durability for over 25 years. Our Gold Abrasives are precision coated with high quality minerals and resins to deliver longer-lasting discs that cu... 

• For shaping plastic filler, removing paint around damaged areas and scratch refinement of bare metal
• Stikit backing
• D weight paper backing
• Aluminum oxide abrasive
• For dry hand or machine sanding... 

Great for Deburring, Filler Shaping, Metal Shaping, Paint Removal, Rust Removal

• Versatile discs for a variety of automotive surface materials
• Pressure-sensitive adhesive b... 

• 6 holes for dust-free sanding
• Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal

3M keeps durability, reliability, and saving costs in mind for it's customers. This red abrasive disc is an economical disc that delivers reliable performance. It features aluminum oxide mineral abrasive on A-weight or durable D-weight p... 

An economical line of abrasive products to meet all of your shop needs.

Delivers best-in-class performance at a very high value in collision repair. It features aluminum oxide, our longest-lasting, fastest-cutting... 

The 3M Red Abrasive Stikit Continuous Sheet Roll is an abrasive roll made use of for filler sanding or putty. This continuous sheet roll can be used for primer sanding, paint preparation, and preparing panels for blending. It speeds up c... 

When trying to restore an old car, the primary job would be to remove all surface defects on ... 

• Used for cutting auto body sheet metal, frame rails, clamps and rusted bolts.
• For use on utility type cut-off tools.
• 3" x 1/32" x 3/8"

• For light sanding on all automotive paints on areas that require hand compounding and for dark colored paints
• Waterproof backing supports wet applications for decreased loading and a faster cut
• Silicon c... 

Use wet or dry for sanding old finishes, fine featheredging and surface sanding

• Abrasive Material: Silicon Carbide
• Stays flexible and cuts ... 

• Available in 2500, 2000, 1500, 1200 & 1000 Grade
• Designed for light sanding prior to compounding
• Sheet size eliminates the need of tearing - entire sheet can be used
• Durable backing resi... 

• Premium, aluminum oxide mineral, an improved paper backing and an optimized construction.
• Performance advantages: Improved rate of cut, increased abrasive life, increased flexibility, and uniform, consistent finish. ... 

For refining sand scratches to help reduce the amount of time spent compounding

• Foam disc used in a spot repair system for removing P1200-P1500 grade sand scratches.
• When work on contour sur... 

• Incorporates Trizact technology for uniform and consistent finish.
• Use damp to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints
• Wet sanding use
... 

The 3M Trizact Hookit Foam Discs features an engineered surface of microscopic three-dimensional structures that gives you the combination of fast cut and consistent finish every time. The discs are used for removing P1200-P1500 grade sa... 

The blending disc is a foam abrasive disc for scuff sanding blend panels, texture matching orange peel and removing fine grade sand scratches prior to paint blending on adjacent panels. Microreplicated 3-D mineral abrasive structures wea... 

• Incorporates Trizact technology for uniform and consistent finish
• Great for spot repairs, leveling dust nibs and sanding of mismatched orange peel
• Part of 3M's Perfect-IT Paint Finishing System
... 

These cloth sheets are best for metal polishing because it provides excellent flexibility and durability, even when rolled or folded. It is constructed with aluminum oxide and bonded to a flexible J-weight cloth backing, which can be tor... 

These paper-backed abrasives are sized for a range of files and pads to reduce product waste. Aluminum oxide mineral abrasive delivers a sharp cut and uniform finish during collision repair. These sheets feature Hookit hook-and-loop atta... 

Place it anywhere in your shop - Can be hung on a wall or placed on a shelf

Organize all the abrasives your body shop requires on a day to day basis with the 3M... 

• 18-gauge heavy-duty metal construction with 14-gauge uprights
• 3 large storage areas to keep your tools & supplies organized
• 5" rubber caster wheels
• Epoxy powder coated for corrosion pr... 

• A durable rubber bucket
• Designed for use when wet sanding
• Each bucket has a tray packed inside to store paper, squeegees and blocks

The 3M P.A.R.T.S. Holding Rack boasts a sixteen gauge steel tubular frame construction and can be adjusted easily to four positions. The corners on the shelf and legs are rounded. In the tabletop form, it can accommodate a maximum weight... 

Restore the clarity of vehicle headlight lenses that are hazed, yellowed, oxidized, and scratched

Are you having trouble seeing the ... 

Store and Organize Your 3M Adhesive Cartridges

This 3M Shop Rack is designed to keep up to 8 cartridges of 3M adhesives and 2 applicator guns conveniently within reach. The du... 

• Available In 150, 180 & 220 Grade
• Use for for rough featheredging
• Used for final sanding of filler and putty
• Cuts through paint, primer, fiberglass, metal and SMC
• 2-3/4" x... 

3M Automotive Sandpaper Rolls for Perfect Painting Preparation

The 3M Stikit Gold Sheet 2-3/4" Sandpaper is a must-have in every auto body workshop. These 3M sandpaper rolls are availab... 

Whether you want to restore paint on your jalopy or use a totally different color, sanding is one of the primary steps you will have to go through. Your auto body workshop needs the 3M Softback Sanding Sponges that allow you to access ha... 

The 3M Finesse-it 3 1/4" Buffing Pad - 02648 is an orange foam loop that provides excellent finishing actions. This buffing pad is designed to be used with 3M Finesse-It Polishes. This pad helps you achieve semi-gloss, satin or high-... 

Premium two-part, self-leveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane ... 

Will Not Run When Applied!

Protect the undercarriage of cars, trucks, recreational vehicles and vans from abrasion and corrosion with the 3M 03584 Professional Grade Rubberized Undercoating Spray. Thi... 

Remove Vinyl and Adhesive Quickly without Damaging Your Car Finish

The 3M Stripe Off Wheel is a simple solution that removes adhesiv... 

Sharp paint lines on a variety of surfaces

• Designed for short-term vehicle storage applications
• Synthetic adhesive system provides UV stability and adhesive transfer resistance for up to se... 

• 20-second set urethane adhesive that replaces cyanoacrylates
• Will not crack or become brittle like cyanoacrylates
• Rebuild tabs and repair broken eyelets
• Bonds to virtually any substrate and ha... 

Improve a car's sound quality with the help of the 3M Duramix NVH (Noise, Vibration & Harshness) Dampening Material. This noise reducing material brings down road noises and vibration and can be applied to various areas of th... 

Super fast-setting adhesive which does not require a separate accelerator such as cyanacrylate adhesives

• Has excellent wide gap filling capabilities an... 

A light J-weight cloth abrasive that's great for general maintenance work. This closed coat aluminum oxide abrasive comes in a range of grades for common applications like repairing metal finishes, removing rust, deburring, blending and ... 

3M Acryl-White Glazing Putty spreads easily and dries slowly to perfectly cover minor scratches and chips. It is quite common to see ... 

Looking for the perfect product for spot repairs, pinholes, stone chips, and surface imperfections? Try the 3M Acryl-Green Spot Putty 14.5 oz tube. This fast-drying formula is perfect for such projects. It has a smooth texture and is eas... 

This 3M Acryl-Red Putty restores smooth, flawless surfaces by filling small pinholes, scratches, stone chips and other minor blemishes in automotive and marine finishes. This putty also leaves smooth edges with quality feathering and low... 

The 3M Hookit Sanding Block Dust Free is specially designed for sanding applications that use body fillers, putty, and primer. The dust-free sanding block featuring the Imperial Hookit system will provide consistent results, over a wide ... 

• Use with abrasives sheets for leveling of repair area or following contours
• Made of a sturdy, durable, high strength material
• These blocks have an embossed rubber face which allows good adhesion for Sti... 

• Use with abrasives sheets for leveling of repair area or following contours
• Made of a sturdy, durable, high strength material
• These blocks have an embossed rubber face which allows good adhesion for Sti... 

• Use with Stikit Sheet Rolls 2 3/4 inch wide or abrasives sheets
• 2 3/4 inch x 5 inch for leveling of repair area or following contours.
• Easy release blue vinyl face
• Contoured for easy g... 

• Specifically designed for use on all straight air files and for use with 3M Stikit File Sheets (2-3/4" x 16-1/2").
• Features a tuck-in clip on the front edge for easy insertion and quick application o... 

• A portable, sturdy dispenser holds 5" or 6" stikit discs
• Holds 2 rolls
• Quick and easy single disc dispensing
• Can be all mounted or attached to a bench
• Keeps abrasives flat while pr... 

Use the very sturdy 3M Stikit Double Roll Dispenser to hold 2-3/4" wide 3M Stikit abrasive sheet rolls to help dispense the sheets easily. The dispenser can accommodate two rolls to allow quick and convenient dispensing and protects ... 

• Pliable rubber block which holds sandpaper securely during wet or dry sanding operations
• Conforms to body contours
• Uses a 2-3/4" x 9" abrasive sheets
• 2-3/4" x 5" block size

• A pliable rubber block which holds sandpaper securely during wet or dry sanding operations
• 3" x 8" rubber block
• Uses a 3 inch x 11 inch sheet

• Firm hand sanding pad to be used with a three-fold wrap of 3M silicon carbide paper sheets, Wetordry Color Sanding Paper Sheets or Production Gold Paper Sheets to make hand sanding easier and more efficient.
• 2-3/... 

• 5 pads per box
• For use with Stikit Sheet Rolls and Imperial color sanding paper sheets
• This pad provides a soft controlled touch
• Eliminates finger marks and edge cutting into primer and paint... 

• Hard rubber backup pad
• Supports 3M Roloc 2 inch diameter abrasive discs
• 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts
• Assembly also ... 

• Hard rubber backup pad.
• 3M Roloc 3 inch diameter abrasive discs
• Pad assemblies come complete with a 2" steel shaft and adapter
• 1/4-20 INT thread which allows it to be mounted directly to ... 

• Provides support on dual action sanders for 3M Stikit discs
• Soft foam construction for conformability and improved surface finish
• Use with grade 220 and finer abrasive discs
• Max 10,000 RPM... 

• Low profile design
• Very good edge support
• Dual action & random orbital
• 6" pad size
• PSA pad

• Use with slow speed polisher or grinder
• Ideal for use with fine grade abrasives for sanding primer on conformable surfaces
• Designed with a tough and durable foam body which helps to provide long pad life... 

• Specially made for use with 3M Stikit Discs
• Vinyl pad face provides good disc adhesion yet allows easy disc removal
• Pad is lightweight, shock-resistant and well-balanced
• Made with a tough, ... 

The vinyl 3M Stikit 8" Air Disc Pad offers superior adhesion of discs and is designed specifically for use with 3M Stikit Discs. Even though the adhesion is strong, the Disc Pad is easily removed, which in turn will help the work run smo... 

• For use with 8 inch diameter Stikit discs to shape plastic filler.
• Attaches with 5 mounting holes.
• Fits National Detroit 900 and Dynabrade Model 57700.
• 15º tapered edge

Speci... 

• Backup pads designed for supporting 5 inch diameter x 7/8 center hole Fibre Discs on pistol grip sanders
• Uses retainer nut supplied with the sander

Level body filler, smooth out imperfections, fix high spots and improve the appearance of welded repairs by using the 3M Sanding Block Kits. This sanding block gives an even finish and makes sanding easier in difficult-to-reach p... 

• Foam Hookit™ Sanding Block to be used as an accessory item with our Hookit™ abrasive products for sanding filler, primer and other substrates.
• 3M™ Hand Sanding Blocks help make sanding easier in dif... 

Level body filler, smooth out imperfections, fix high spots and improve the appearance of welded repairs by using the 3M Sanding Block Kits. This sanding block gives an even finish and makes sanding easier in difficult-to-reach p... 

When you need the perfect solution to removing paint defects, try our 100% Wool Compounding Pads. These 3M Wool Compounding Pads are built to deliver an aggressive cut for a smooth finish, ideal when compounding on paints, clears and com... 

Double Sided for Twice the Usable Buffing Surface

• Blended untwisted wool, less aggressive than 100% wool
• 9" diameter pad
• Fits ... 

• A double-sided, soft edge polishing pad
• Specially designed for use with a polisher and glaze
• Made of extremely fine fibers
• Wool-blend pad
• Produces a high gloss on paint surfaces... 

Quick Connect System Makes it Fast and Easy to Switch From Pad to Pad

• 8" Double sided foam compounding pad
• Quick connect/disconnect
... 

3M Perfect-It Foam Polishing Pad Quick Connect is a double sided foam polishing pad. This polishing pad removes fine paint surface defects and also helps in removing compound swirl marks. The quick connect pad makes it simple to switch f... 

Quick Connect System Makes it Fast and Easy to Switch From Pad to Pad

• 8" Diameter
• Double sided ultrafine foam polishing pad
• Qui... 

The 3M Superbuff Adapter can be used with different models of 3M Superbuff Buffing Pads and the Perfect-it Backup Pad (05718). This versatile adapter can be used with specific 3M buffing pads: 05700, 05701, 05703, 05704 and 05705... 

• Single sided pad
• Wool blend
• Removes P1200 and finer scratches and other paint surface defects
• Unique compounding-polishing pad system provides a quick change advantage yet produces exceptional... 

The 3M Hookit 9" Polishing Pad is designed specifically for compounding and polishing while providing exceptional finishes on any paint system. The polishing pad works well for both 3M Superbuff Backup Pads (3M 05717 and 05718). ... 

We stock the Perfect-It Superbuff Backup Pad, which is designed to fit all the standard slow-speed polishers (5/8" shaft) available on the market. Buffing is an essential process in automobile painting procedures and this ver... 

Excellent for Hard Paints

• This full bodied compounding hook-it pad provides a quick change advantage while producing an excellent finish on any paint.
• Single-sided, 100% ... 

• Foam pad helps eliminate swirl marks on painted surfaces, even on difficult dark colored cars
• Use this pad with Perfect-It EX Machine polish for complete scratch removal
• Wipe haze with Detail Cloth
... 

• Foam polishing pad utilizing 3M's patented convoluted foam face.
• New reduced diameter loop attachment backing for added edge protection.
• Fits all standard 5/8 inch shaft slow-speed polishers.
... 

Eliminate compound swirl marks and fine defects on painted surfaces with the 3M Perfect-It Plus 8" Foam Polishing Pad. This foam polishing pad has a unique inset design and features a convoluted foam face that allows air to pass under th... 

• Use with abrasive sheets for leveling of repair area or following contours
• Made of sturdy, durable, high strength material
• Designed for 3M Hookit & Hookit II Sheets
• 2-3/4" x 5" Hook... 

• Firm plastic block with easy release hook faceUse with Hookit™ abrasives sheets 2 3/4 inch x 7 3/4 inch for leveling of repair area
• Produces true flat surface

• Made of a tough, flexible foam for block sanding flat and contoured areas
• Provides positi... 

Get a true flat surface with the 3M Hookit Regalite 16" Hand File Board. This sturdy hand file board is made of plastic and comes with an easy release hook face. It has a distinct design to securely hold abrasive products while allowing ... 

• Foam pad helps eliminate swirl marks on painted surfaces, even on difficult dark colored cars.
• Use this foam pad with Ultrafina SE (PN 06068 or 06069) as a paint finishing step after swirl mark remover.
... 

The 3M Quick Connect Adapter is a buffing tool adapter that is used for quickly connecting and disconnecting buffing pads from the buffing tool. The quick connect adapter is easy to use and has a 5/8" thread. The 3M adapter is best u... 

The 3M Perfect-It Wool Compound Pad Quick Connect uses 3M's unique method of attaching double sided wool and foam pads to buffers. This quick connect/disconnect system ensures that the pads are centered every time and that they lock into... 

Features a fast-cutting, durable wool/acrylic blend to remove swirl marks and surface defects for a fine, polished finish. Our durable double-sided polishing pads feature built-in support at the center which allows for excellent con... 

• A thinner low profile pad provides better support for block sanding
• Max 12,000 RPM

2.75 oz Tube

Designed for use with 3M™ 2-part body filler & glazes

Use the 3M Hookit Soft Disc Pad, 8 inch , 05768 with a slow speed polisher/grinder. Ideal for use with fine grade abrasives for sanding primer on conformable surfaces. MOS: 3000 RPM.

The 3M Hookit Soft Interface Pads are designed for use on 3M Hookit abrasives, and help to improve abrasive cuts and finishes. They reduce vibration on dual action random orbital sanders, and work best with the 3M Hookit disc pads. The h... 

The 3M Hookit 5" Disc Backing Pad is designed to firmly hold a sanding or finishing disc, or buffing pad to enable use with a random, rotary or orbital sander. It has a hook and loop feature that makes it quick and simple to attach, remo... 

• Edges are contoured to allow for sanding curves and close to moldings.
• Fits all standard (5/8 in shaft) slow-speed polishers with a max operating speed of 3,000 RPM.
• 8" diameter disc.
... 

• For use with 8 inch diameter Hookit discs to shape plastic filler.
• Attaches with 5 mounting holes.
• Fits National Detroit 900 and Dynabrade Model 57700.
• Max 1,500 RPM.

• For use with 8 inch diameter Hookit™ discs to shape plastic filler
• Attaches with 6 mounting holes
• Fits Chicago Pneumatic 777 sander
• Max 1,500 RPM

An 8 inch pad to be used with Hookit abrasives for multiple sanding applications

• Use with 6" diameter Hookit discs
• Made with soft foam for conformability and spreading out finger pressure
• Strap holds pad on hand
• Soft foam rubber spreads out sanding pressure
• Th... 

• Use with 6" diameter Hookit discs
• With disc wrapped around the pad the 1/4" radius edge allows for sanding in hard-to-reach areas

3M Lightweight Body Filler repairs dents, dings and other cosmetic imperfections on bare steel, aluminum and fiberglass reinforced polyester (FRP).

• Lightweight polyester body filler
• Tack-free... 

Two-component, stain-free, tack-free, self-leveling repair putty

• Smooth application
• Designed for use as a skin coat over plastic filler to ... 

TWIST, MIX & FIX! It's that Easy!

Professional pneumatic (air-operated) applicator for cartridge-based Body RepairMater... 

Red nozzles for the 3M Dyanmic Mixing Gun

• Proprietary design that defines Dynamic Mixing with low waste
• Box of 50

Use these tips for the following 3M Products:

• A method for identifying surface imperfections such as pinholes and deep scratches in primer.
• Requires no masking and there is no dry time involved.
• Can be used for both wet and dry sanding.
• T... 

The 3M Dry Guide Coat Cartridge & Applicator Kit can help you identify imperfections such as scratches and pinholes in primer. The 3M Dry Guide Coat requires no masking before use, unlike liquid aerosol guide coats. It also does not ... 

Thicker formula - Ideal For Vertical Panel Applications.

• Premium polyester glazing putty
• Use as a "skin" over sheet metal and dent repair compound to fill pin... 

3M Marson's popular Platinum Plus Body Filler now packaged as a cartridge-based component body repair material for use in the 3M Dynamic Mixing System.

• Us... 

3M Marson's popular Platinum Plus Body Fillernow packaged as a cartridge-based component body repair material for use in the3M Dynamic Mixing System.

• C... 

The 3M Automix E-Z Fix Flexible Patch is a patch that is strong, flexible and easy to apply. It produces a clean appearance on the back side repair. There is no cure time needed before applying the cosmetic filler to the front side of th... 

Dries in 10 Minutes!

• A specially designed adhesion promoter for use in all System II repairs. It is compatible with all 3M Flexible, Semi-Rigid and TPO... 

Shield vertical surfaces of automobiles from damage that could result from welding spatter and grinding sparks with the 3M Welding and Spark Deflection Paper. This is an adhesive-backed paper designed to be flame-resistant. It is great f... 

Fast Drying, Minimizes MIG Weld Splatter

• An aerosol coating designed to be applied to metal surfaces prior to welding which permits corrosion protectio... 

When you are using a grinder or welder, it is vital that you have the 3M High-Performance Welding Drape to protect surfaces from grinding or welding sparks. Capable of taking extreme heat, sparks, and splatter, this welding drape may be ... 

• Entry Level Machine Polish
• Designed for us on OEM and fully cured automotive paints... 

The 3M Super Duty Rubbing Compound is a top tier product that removes 1000 and finer sand scratches on all types of paint surfaces. It is an aggressive compound that remains wet with little or no mess and maintains a high rate of cut wit... 

3M Rubbing Compound makes dull and tired looking auto body finishes look new and glossy again.

• Specially designed medium-cutting compound for removing grade 1200, 1500 and 2000 color sanding scratches in automotive pain... 

• Cream type hand cleaner
• High performance
• Non-caustic
• Removes... 

The 3M Machine Polish is compatible with all types of paint and does not contain any wax or silicone. It leaves a mark-free finish when applied with the 3M Perfect-It foam polishing pad, and provides easier detailing and clean up on dark... 

The 3M Scuff-It Paint Prep Gel is designed to help in cleaning, abrading, and de-greasing automotive surfaces before painting. The paint prep gel should be used in conjunction with Scotch-Brite hand pads. Scuffing the paint between coats... 

Reusable and Durable

• Non-linting
• Unique micro-textured surface rapidly removes oily or filmy residue including waxes, polishes, glazes and fingerprints, and is ideal for paint, chrome, glass, d... 

Reusable and Durable

• Non-linting
• Clear coat safe
• Unique micro-textured surface rapidly removes oily or filmy residue including waxes, polishes, glazes and fing... 

• Provides a superior cut while leaving a fine swirl mark finish on all modern paint systems!
• Removes P1200 and finer sand scratches while providing excellent handling characteristics with easy clean up
• Whi... 

Easy to Spray on Formula

• Use to inspect surfaces for any remainging sand scratches after buffing
• Allows sand scratches and other defects to... 

Machine polish is the idea way to help maintain your vehicle's finish. 3M Perfect-It EX Machine Polish offers superior performance over other commercial-grade polishes, to provide you with easy handling, improved performance in extreme c... 

Provides a Leakproof Seal

• 3.0 mil, high-temperature-stable (PTFE) thread sealant that provides a leak-proof seal with a temperature rated to... 

Foam tape softens hard paint lines in the jamb areas

The 3M Soft Edge Foam Masking Tape is designed especially for use with door jambs, hoods, or deck lids. A door jamb is one of the two upright parts of a door fr... 

3M Scotch Fine Line Tape is a polypropylene tape that has a specially processed film backing to allow taping over freshly painted acrylic lacquer or enamel surfaces sooner and with a reduced chance of imprint damage. It also provides the... 

A specially engineered tape that is slit to provide pull-out pieces for paint striping.

Achieve precision in your auto body paint striping jobs with 3M Scotch Fine Line Striping Tape. With a time-saving ability, t... 

• 3M™ Automotive Attachment Tape, PN 06376, is characterized by good peel and shear adhesion, good internal strength, good conformability and good plasticizer resistance
• Size: 1/4" x 20 yd
• T... 

• Attaches emblems, nameplates, badges, light weight molding & trim
• Medium-density gray acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner
• Use with 3... 

Features two adhesives – one on each side of the tape for effective bonding

The 3M Automotive Acrylic Plus Attachment Tape is OEM approved for the attachment of body side moldings, fasc... 

Automotive acrylic foam tape

• Individually boxed
• Pressure sensitive bonding
• Excellent dirt and water barrier
• Thinner for a flush... 

• Attaches emblems, nameplates, badges, light weight molding & trim
• Medium density gray acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner

Availabl... 

Enhance the adhesion of 3M Acrylic Foam Tape for use in automotive applications with the 3M Automotive Adhesion Promoter, Sponge Applicator Packet. This primer adhesion promo... 

You can now achieve a smooth finish on all your auto body painting works with the help of the 3M Vinyl Tape 471+. This plastic tape comes with a vinyl backed construction that gives an exceptional paint line definition to help you achiev... 

3M Precision Masking Tape is the perfect product for creating sharp, clean, precise paint lines. It is engineered with and ultra-thin, smooth paper backing so that you can achieve sharp paint lines when used with both solvent and waterbo... 

3M White Masking Paper is specifically manufactured for automotive aftermarket applications. This paper Provides excellent resistance to paint solvents, urethanes, base coats and clear coats. Can withstand bake cycles up to 400 degrees F... 

Use the 3M Highland Masking Tape for automotive repairs and refinishing and get the benefits of instant adhesion, sound adhesive transfer resistance, and exceptional holding power. It is a natural-colored tan crepe paper masking tape off... 

3M's Automotive Masking Tape 2308 sticks and holds to a variety surfaces such as paper, fiberboard, glass, rubber, plastic and metal and removes cleanly with no residue. Can be used for holding, bundling, sealing, general paint masking a... 

The 3M Overspray Protective Sheeting is a high density, clear, tear-resistant translucent film that masks as well as protects your vehicle from paint overspray. The specially designed polyethylene film, HDPE, is designed for high-perform... 

3M Scotchblok Masking Paper blocks solvents used in today's gelcoats and paints from soaking through and contaminating underlying surfaces. Our tightly bonded, specially coated automotive masking paper offers excellent resistance to pain... 

• Provides complete surface protection in less time by allowing one person to apply both tape and film/plastic/paper in one... 

Does painting automobile doors, quarter panel jambs, and fenders often result in hard paint lines requiring rework? You can get rid of the need for rework that results from such poor paint transitions by using 3M Smooth Transition Tape. ... 

Sprayable & Easy to Apply

• Spray a coating of Dust Control Spray before vehicle enters the paint booth
• Water-based formula designed to a... 

Water-Based Liquid Specifically Designed to Protect Paint Booth Walls, Lights, etc. from Paint and Primer Overspray

Good Lighting conditions in the spraybooth are critical t... 

Here’s the perfect product for protecting hard-to-mask surfaces - the 3M Overspray Masking Liquid Dry. You can spray it onto a sub... 

The 3M Scotch® Apron Taper is designed for dispensing masking paper up to 18 inches. It dispenses masking tape and paper together to minimize shop waste, improve results, and save time. It features a high-density, clear, tear-resist... 

You can now repair small holes, scratches and other common car issues yourself without running to an expert. The perfect DIY solution for rusts and scratches is here just for you. The 3M Scotch Auto Body Repair Tape is a must have produc... 

• Secure yet removable tape for temporary labeling and copy blockout
• White paper backing with a low-tack acrylic adhesive
• Use anywhere
• Great for labeling bins, shelves and drawers
• St... 

This hose is 25 feet long and has a 3/8 inch inner diameter. It is equipped with MPT fittings at both ends and accepts 1/4 inch FPTfittings. You may not combine 25 or 50 foot lengths of the 3M Supplied Air Hose W-9435.

... 

This hose is 100 feet long and has a 3/8 inch inner diameter. It is equipped with MPT fittings at both ends and accepts 1/4 inch FPT fittings. 3M Supplied Air System approvals allow for 100 foot lengths of this hose can b... 

• Alcohol-free formula
• Hygienically cleans respirators and other personal protective equipment
• Individually wrapped 8" x 10" wipes
• Box of 100

Used with the 3M Dual Airline Front-Mounted Adapter Kit SA-1000LP, Low Pressure.

This tube is part of the 3M Back-Mounted Adapter Kit SA-2000LP (low pressure).

Includes the 3M Air Regulator SA-1009 and Waist Belt GVP-127. Used with breathing tube, facepiece, filters/cartridges and air supply hose, it makes a complete 3M Dual Airline Supplied Air Respirator.

Includes the 3M Dual Airline Connector SA-1029 and the Waist Belt GVP-127. This assembly can be used with any 3M Low Pressure Dual Airline Supplied Air Respirator.

This high capacity sorbent has a scrim on one side to increase strength and help eliminate linting. This conveniently sized pad allows the user to quickly spread sorbent on and in the path of a spill.

• Recommended for use o... 

**Respirators are non-returnable**

This economical N95 disposable particulate welding respirator helps provide respiratory protection for applications where metal fumes may be p... 

**Respirators are non-returnable**

• Half Facepiece respirators may be used up to 10X OSHA PEL or applicable government standard, whatever is lower. If exposure levels ar... 

For use with automotive low maintenance half and full facepiece respirators and the automotive durable style half facepiece respirators.

Includes: 1 pair 07046 organic vapor cartridges and 2 pairs of 07194 P95 fil... 

• Brown rivet cleaning disc designed to sand and clean around rivets
• No special tools required
• Mounts onto the 3M™ Roloc™ + Holder 07500 to fit standard tools or drills

Very mild abrasive provides gentle yet thorough cleaning

• Conformable so hard-to-reach, contoured surfaces are easy to reach
• Works well wi... 

For Final Sanding of Primer Surfacer

The 3M Scotch-Brite Ultra Fine Pad Gray is made of nylon web and does not rust like steel wool. It is perfect for use in th... 

• Used to quickly remove cork or paper gaskets and Form-In-Place gasket material prior to assembly of power train components, engine blocks, heads, and valve covers
• Attaches to 3M™ Disc Pad 07494
... 

• Makes surface preparation fast and easy.
• Great for removal of undercoatings, stone guards, seam sealers and rust.
• Works well under hood webs, in truck beds, door jambs, under carriage and wheel wells.... 

• Makes surface preparation fast and easy. Great for removal of undercoatings, stone guards, seam sealers and rust
• Works well under hood webs, in truck beds, door jambs, under carriage and wheel wells
• Mount... 

• Aggressively removes paint and rust from seams, door jambs, drip moldings, pinch-welds and other difficult-to-reach areas
• Three-dimensional abrasive web conforms to work area
• Safer than using wire bristle... 

The 3M Scotch-Brite 6" Scuffing Discs give you a faster and more efficient way to machine scuff final sanding of primer-surfacer. The scuffing disc attaches to 3M Hookit Disc Pad 05776 and is available in colors Maroon (07467) an... 

• Quick half turn on, half turn off
• Use with 3M Roloc Disc Pad Assembly 05539
• Used to quickly remove cut cork or paper gaskets and form-in-place gasketing materials prior to the assembling of power tra... 

• 3M 07485
• 3" Roloc Prep Disc
• Brown Coarse
• 25 per box
• Quickly removes cork or paper gaskets and form-in-place gasket material prior assembling drive train components engine block... 

The 3M Scotch-Brite Roloc 3" Medium Surface Conditioning Discs "" 07486 help you achieve an outstanding paintable and burr-free finish in just a few steps. You can achieve this result without causing any damage to the base material. The ... 

• Size: 2" x 1/4"

For use with:

• Scotch-Brite Clean 'N Strip Disc, part number 07460.
• Scotch-Brite Clean and Strip XT Disc, 07461

• For 2 inch discs
• Shank: 1/4"
... 

The 3M Stripe Off Wheel helps in removing unwanted decals, vinyl, tape and graphics without causing harm to the substrate. The high-speed wheel also helps in easily removing double-sided molding striping and trim.

Key Feat... 

Remove vinyl stripes, letters, numbers, and graphics from gel coat and painted surfaces of automobiles with the Scotch-Brite 4" Molding Adhesive & Stripe Removal Disc. Using this disc will not scratch or damage the acrylic enamel or ... 

• Quickly removes cork or paper gaskets and form-in-place gasket material prior assembling drive train components engine blocks, heads, and valve covers. Use with 3M™ Roloc™ Disc Pad 05540
• Best used o... 

• Great for cleaning and finishing metals for removal of light rust, oxides and coatings
• 3" diameter
• Super Fine Grit
• Silicon Carbide abrasive material
• 25 discs per box

• Ultra flexible and conformable for cleaning or fine finishing
• Convenient dispenser saves time and eliminates waste
• Replaces steel wool to eliminate contamination.
• Load resistant
• C... 

The 3M Roloc Bristle Discs are the ideal tool to replace scrapers, wire wheels, and chemical gasket strippers. They are best used on harder metals such as steel and feature an aluminum oxide abrasive. These bristle discs are molded and f... 

The 3M Scotch-Brite Roloc Bristle Disc White, 2", Fine, 10 discs/box is the perfect tool for stripping and deburring vs. a wire brush. Use it with 3M Roloc Holder 05539 on softer metals like aluminum and it will not allow any fly backs. ... 

• Back-up pad that provides support for 3 inch Scotch-Brite Gasket Removal Discs
• Pad assembly comes with 2 inch steel shaft and adaptor

• Thicker pads for more efficient scuffing of flat panels
• Perforated job sized pads
• Optimum adhesion for primer, color or clear
• 1200-Finer grit equivalency
• Use: for preparing col... 

• Thicker pads for more efficient scuffing of flat panels
• Perforated job sized pads
• Optimum adhesion for primer, color or clear
• 320-400 grit equivalency
• Use wet or dry
... 

• Thicker pads for more efficient scuffing of flat panels
• Perforated job sized pads
• Optimum adhesion for primer, color or clear
• 600-1000 grit equivalency
• Use wet or dry
... 

• Ultra sharp abrasive.
• Makes prepping panels quicker and easier with a finer finish.
• Prepares tough e-coats for finishing.
• Tears into 2 convenient 4-1/2" in x 6" pads.
... 

• Bonds all types of gaskets to painted or unpainted metal surfaces.
• Adhesive stays permanently flexible and rubbery, never dries out or becomes hard.
• Easy to brush and spread.
• Extre... 

• A strong, flexible, rubbery adhesive that can withstand vibration and extreme temperature variations.
• It can be used to bond automotive weatherstripping and is a great adhesive for holding paper, cork, or rubber gas... 

• Excellent clear adhesive for plastic repair and emblem application.
• May be used for interior or exterior bonding.
• Used for bonding metal emblems, rigid plastic parts, taillight lenses and vinyl tr... 

• Clear adhesive that is used for attaching lightweight trim material such as upholstery cloth and trunk liners to metal and other surfaces
• May be used to bond styrofoam
• Quick setting, low mist formul... 

Great Heat and Water Resistance

• A low VOC, high-strength adhesive
• For bonding automotive materials (carpeting, jute pads, fabrics, plastics) to metal and other surfaces
• Good heat and wate... 

Strong and Heat Resistant

• A contact adhesive designed for bonding vinyl tops, heavyweight headliners and hood silencer pads where high strength and heat resistance are needed.
• The service temperature Range ... 

• Two-part, clear epoxy that delivers strong, durable bonds within minutes after application.
• Makes difficult repair jobs easy when used to join parts made of plastic, metal, glass, fiberglass, wood, etc.
• T... 

The 3M Performance Manual Applicator Gun is designed for the 3M two-part cartridge range. It accurately mixes two pack adhesives to the perfect consistency without the need to measure. It dispenses 1:1 and 2:1 200 ml dual pack cartridges... 

• 3M Static Mixing Nozzle for use with all 3M 200mL and 400mL two-component cartridges
• Larger diameter allows for easier dispensing.
• This nozzle can be used with two-part products in either the 08117 ap... 

• Seam sealer tips help match OEM applied seam sealer beads on repairs
• Tips make the work easier for automotive technicians
• Professional standards reduce chances of costly rework
• Tips availa... 

• Two-part epoxy used as a general purpose adhesive for metal, glass and plastic.
• Clear, non-yellowing adhesive
• 3 minute work time
• 25 minute handling time
• 60 minute cure time
... 

The 3M Automix SMC / Fiberglass Panel Adhesive is perfect for bonding sheet metal compound (SMC) and fiberglass reinforced polyester (FRP) body panels. It efficiently bonds SMC and FRP panels to each other and is also... 

The 3M 08223 Automix Universal Black Adhesive is a general purpose automotive adhesive for metal, glass and plastic!

• Strong and durable
• Works on a wide variety of substrates
• 3 minute work ... 

Provides Nearly Instant Bonding of Rubber, Metals & Plastics

• Cyanoacrylic adhesive kit used to provide near instant bonding of rubber, metal and pl... 

• Two-part epoxy used to adhere backup strips and patches to SMC and FRP (traditional fiberglass)
• Medium work time or larger repairs
• Paste consistency

Technical Specifications... 

• For quick repair of nicks, gouges, or small defects on mentioned plastics due to extremely fast work time
• Excellent adhesion over a wide range of temperatures
• Two-part urethane adhesive used to repair Xen... 

Looking for a product that can ensure strong reinforcement of plastic automobile components? Try the 3M Automix Semi-Rigid Parts Repair. It is widely used for the backside reinforcement of plastic parts. The two-part urethane adhesive ca... 

• Two-part urethane that is used to repair Thermo Plastic Olefins identified as TPO, PP, EP, and EPDM.
• Use with 3M Automix Polyolefin Adhesion Promoter, part number 05907.
• Excellent choice for nicks, gouges... 

• Two-part urethane adhesive that can be used to adhere backup strips and patches to SMC and FRP (traditional fiberglass)
• Has automatic mixing and metering
• Fast work time for small strip and patch a... 

• Two-part urethane
• Bonds backup strips to SMC and FRP
• Fast work time for larger backup strips and patch applications
• Excellent for bonding headlamp buckets
• Low viscosity
... 

• Two-part urethane used to adhere SMC and FRP (traditional fiberglass) body panels to each other and to metal frames (metal must be primed with two part primer, 08278)
• Work time = 35 minutes, Cla... 

• Heavy bodied seam sealer
• Quick-skinning, fast-curing, flexible sealer
• Can be used wherever heavy bodied seam sealers are needed
• High solids and low shrinkage
• Ideal seam sealer wher... 

Clear heavy bodied seam sealer

• Quick skinning, fast curing, flexible sealer
• Can be used wherever heavy bodied seam sealers are needed
• High soli... 

Self-Leveling, Fast Cure Through!

Close seams in metal enclosures like auto bodies with the very durable 3M Automix Self-Leveling Seam Sealer. This sealer has a... 

Try our 3 Bare-Metal Seam Sealer is a tough, flexible sealing material formulated for sealing bare metal joints, such as steel or aluminum, as well as primed or painted metal in collision repair. Two-part, self-mixing epoxy sealer can be... 

The 3M Ultrapro Urethane Seam Sealer is a moisture-curing, one-part seam sealer that is designed for interior and exterior body seams. This non-shrinkable seam sealer is very flexible and has fast curing properties. Due to its excellent ... 

The 3M Urethane Seam Sealer is ideal for sealing the exterior and interior RV and automotive joints and seams. Rust begins at the seams, and a badly applied sealant could lift up and let water enter using capillary action. Rust ruins sea... 

high quality, heavy-bodied, general purpose, moisture-curing seam sealer for interior and exterior body joints.

• Excellent adhesion to primed metal and aluminum
• ... 

Non-Shrinking, Non-Cracking & Fast Curing

The 3M Ultrapro MSP Sprayable Seam Sealer is a gray, high performance and general purpose seam sealer that can be ... 

• Fully enclosed, all metal, rod driven, friction feed applicator gun
• For use with 3M Windshield Urethanes, Urethane and MSP Seam Sealers in 310 mL or smaller flexible foil packages.
• 12:1 ratio

Fully enclosed, pneumatic applicator gun for use with 3M Windshield Urethanes, Urethane and MSP Seam Sealers in 310 mL or smaller flexible foil packages

Paints Quickly with Excellent Tooling Properties>

• High solids, clear joint and seam sealer designed to seal interior and exterior joints and seams
... 

Expands to 10x Its Original Volume!

Every collision repair specialist can affirm the importance of foam in the automotive industry. 3M Automix Pillar Foam can expand up to 10x its original volume and is a two-part ... 

The 3M Automix Flexible Foam is designed to replace flexible foams in OEM applications such as door skins, door cavities, roof beams, trunks and more. Best used for OEM replacement of flexible foams, the 3M flexible foam, has a work time... 

• Used for sealing interior and exterior auto body joints and seams.
• Applies easily, can be smoothed to a featheredge with a wet finger and sets to a firm, tough, rubber-like, water-resistant bead.
• Can be... 

Seal exterior seams and joints with the quick setting 3M Fast 'n Firm Seam Sealer. This sealer shows good adhesive tendencies to clean primed or painted metal and is available in a 1/10 gallon cartridge.

The seam sealer is a qu... 

The 3M Heavy Drip-Chek Sealer Gray is a light gray colored sealer that applies easily and adheres well to properly prepared primer and paint. It shrinks during the curing process to provide a visual definition seam. It is perfect for app... 

Seal joints, voids, seams, and gaps with the 3M Strip Calk Black and this thumb grade seam sealer will permanently fill all such op... 

The 3M Windo-Weld Ribbon Sealer Kit is intended as a replacement to original equipment butyl installation. It can also be used as a secondary sealant when installing secondary glass with urethane adhesive.

How to apply the ... 

Gluing glass to a metal or to glass itself is quite a challenging task without the right adhesive. Worry no more, as the 3M Automix Channel Bonding and Sidelite Adhesive works towards safely bonding moveable and stationary glass in autom... 

Paintable When Dry

The 3M Brushable Seam Sealer Gray is a specially developed product that can be used for sealing floor pans, firewalls, trunk seams, shock abs... 

The 3M Urethane Primer Daubers are essential for the application of urethane primers. Urethane primer is applied as the next coating after self-etching or epoxy primers, fillers, existing finishes and even bare metals. After having strip... 

Protects lower auto body panels from damage such as stone chipping, and may be applied over properly prepared primer o... 

Corrosion Resistant Formula

This coating does not contain a UV screener and should not beused on top surfaces exposed to direct sunlight unless it is top coated... 

Bond mirror brackets to windshields permanently with the 3M Rearview Mirror Adhesive. This professional strength adhesive is a two-part structural acrylic system that works to professionally mount rearview mirrors. This user-friendly adh... 

Allows body shop technicians to apply 3M Cavity Wax Plus in hard-to-reach places such as internal door skins and frame rails.

• Designed for use with 3M Cavity Wax Plus 08852
• Makes it faster and ... 

Using 3M Cavity Wax Plus 08852 is simple and effective for car rust prevention!

This car cavity wax is an interior corrosion prevention coating for application ... 

• A heavy-bodied, lithium grease based, Long-lasting aerosol lubricant.
• Provides good performance under high friction loads, rubbing, and wiping action.
• Excellent for general applications on all met... 

This reliable coating provides exceptional resistance to abrasions and chips on rocker panels, along with perfectly matching the OEM texture you must replace after completing a repair to an automobile following a collision. In most cases... 

• Tough, fast drying, paintable, rubberized undercoating material that effectively protects and sound deadens door skins, quarter panels, wheel wells, frame rails, trunks and fenders.
• Use with 3M 08801 applicator gun.... 

• Designed for use with 3M No Cleanup Coatings, part numbers 08804, 08949 and 08964.
• 8 nozzles per bag.

The 3M Side Molding and Emblem Removal Tool is designed for use with an air hammer or chisel. It helps to remove auto body side moldings without causing any damage to the molding or the vehicle.

The 3M Side Molding and Emblem Remo... 

The 3M Prep Solvent-70 is a low VOC, water-based solvent that works well for removing grease, oil, wax, and silicone from surfaces before coating. It can be used to clean metal, painted surfaces, and primed metal before applying paint or... 

Clean several types of reactive adhesives from a variety of substrates quickly and efficiently with the 3M General Purpose Adhesive Cleaner. This cleaner can effectively remove silicone polish, tar, oil, epoxies, tree sap, light paint ov... 

Work with the 3M Professional Caulking Gun when you need to dispense material from 1/10 gallon cartridges. This high-performance gun works for the professional and is used for adhesives and sealants. The 3M caulking gun is a single compo... 

Make some space in your tool chest for the super convenient and economical 3M Schutz Applicator Gun, which will surely be an asset to your collection. This applicator has been specially designed to improve efficiency and provide a distin... 

You can use the 3M Scotchlok Electrical Insulation Displacement Connector 314-BOX, Pigtail, Moisture Resistant and Flame Retardant to connect multiple wire ends. It can also insulate the connection and provide a moisture-resistant seal f... 

A pneumatic applicator gun designed for use with 3M's 200mL cartridges

• Pneumatic system is ideal for large volume dispensing
• Inlet at the handle accepts standard air fittings
• Pistol-grip handle

• Stain-Free, tack-free polyester glazing and finishing putty
• Offering the best adhesion to steel, galvanized steel, aluminum, E-Coat, and SMC
• Ideal for filling scratches, cracks, splits, dings, pinholes ... 

Save money and make your job easier with the 3M PPS Standard Kit Lids & Liners. This novel paint preparation system ensures that painters mix, filter and spray paint by minimizing waste and maximizing productivity.

With only o... 

The 3M PPS Standard Kit Mixing Cups & Collars are part of the very popular and versatile 3M Paint Preparation System (PPS). The mixing cups and collars can be used with this system to mix and dispense paint efficiently.

• Large hard cup that supports and holds the PPS large flexible liner, part number 0403.
• If filled to the top, this cup will hold 32 fl oz.
• 1 cup and 1 collar

The 3M PPS Large Kit Lids & Liners contains 25 large lids with filters, liners, and ten sealing caps for your convenience. If you own a busy body shop or like to indulge in DIY paint projects, then this set of utility items is a must... 

Lids, Filters, Liners & Sealing Caps in One Kit

• Recommended for traditional solvent based paint or prier applications
• Complies with EPA Rule 40 CFR Par... 

• Mix ratio printed on film insert
• Used with standard size cups and liners
• 100 inserts per box
• Inserts are reusable, they never touch the paint!
• Film inserts must be placed between t... 

• Mix ratio printed on film insert
• Used with mini size cups and liners
• Inserts are reusable, they never touch the paint!
• Film inserts must be placed between the hard cup and flexible lin... 

• Mix ratio printed on film insert
• Used with large size cups and liners
• 100 inserts per box
• Inserts are reusable, they never touch the paint!
• Film inserts must be pla... 

The 3M PPS Mini Kit Lids & Liners is an innovative Paint Preparation System (PPS) that helps you save money and makes your job easier. The lids and liners ensure that you mix, filter and spray paint with minimal waste and max... 

• Midi 400 mL or 13.5 oz size, hard cup that supports and holds the PPS Midi flexible line 16112 and 16312
• Ideal size for painters to mix paint for two-panel repairs
• Efficient use of materials means less w... 

PPS is a complete painting system from 3M which produces cleanerjobs, saves on solvent usage and gun cleaning time and can improveoperator efficiency by as much as 15%. Specifically designed adaptersallow painters to use the PPS system w... 

• 25 - standard/large size lids with 200 Micron Filters
• These are replacement lids that fit both the standard size 3M PPS Kit 3M-16000 and the large size 3M PPS Kit 3M-16324

• Contains 25 Midi, 400 mL or 13.5 oz, size lids with 125 Micron Filters. These are replacement lids which fit 3M PPS Midi Lids and Liners 16312.
• Smaller than the Standard Size PPS but larger than the Mini

• Dispenses supplies for the 3M Paint Preparation System (PPS)
• Offers exceptional convenience to access supplies
• Keeps supplies clean, neat, organized and free from contamination
• Top-loa... 

The 3M PPS Quad Wall Mount Gun & Cup Holder is the perfect hanger for your expensive gravity speed spray guns when you are not using them. Leaving your spray guns unattended in the garage may lead to accidents and damage. To put your... 

PPS is a complete painting system from 3M which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS syste... 

• 50 disposable lids with either 200 or 125 micron filters
• 50 disposable liners and 20 sealing plugs
• For use with the 3M-16122

Note: mix ratio insert is purchased separately.... 

• Kit contains 50 each mini lids, filters, liners and 20 sealing caps.
• 125 Micron Filter For Waterborne Paints
• Graduated measurement to 5 1/2 oz (with generic mix ratio film insert).
... 

PPS is a complete painting system from 3M which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS syste... 

Meets the performance criteria for fit testing respirators under the current OSHA Standard for Respirator Protection: 29 CFR 1910.134, Appendix A. The fit test works by sprayinga sweet or bitter solution intothe hood environment. If thew... 

• Replacement bulb to be used with the 3M PPS Sun Gun II Color Matching Light Kit 16550
• It is not compatible with earlier versions of the 3M Sun Gun 16400

• The 3M PPS SUN GUN II Battery Pack Model, PN16555, is used with the 3M PPS Sun Gun II Color Matching Light Kit, PN16550
• It is not compatible with earlier versions of the 3M PPS SUN GUN, PN16400
• The 3M PPS... 

SUN GUN II Battery Charger Only

The innovative Accuspray™ replaceable atomizing head spray gun eliminates spray gun maintenance kits, allows user the ability to visually confirmation the spray gun is clean and offers the performance of a brand new spray gun on de... 

This 3M Accuspray ONE Spray Gun System with PPS is extremely lightweight and easy to handle thanks to its molded composite construction. It's also incredibly durable, makin... 

• Atomizing heads for 3M Accuspray ONE series and other Accuspray models that use replaceable atomzing heads
• See-thru design allows user to check and see if head is clean or needs to be replaced
• User can re... 

If you are looking for an efficient applicator for viscous gel coats, heavy primers, or adhesives, you are in luck. We carry the 3M Accuspray HGP Spray Gun Kit that you can use with virtually any product that needs spraying. The spray gu... 

• Replaceable atomizing heads for use with the 3M Accuspray Spray System
• 2.0 mm
• 4 per kit

Replaceable atomizing heads for use with the 3M Spray Gun Model HG14

• 1 HP motor delivers fast, smooth performance
• Combine with 3M Cut-Off Wheels
• Provides enough power to cut through carbon, stainless steel tubing, pipe, rebar or sheets
• 360º Rotating... 

• Dust extraction 3" Hookit back up pad constructed on foam material
• Backup pad has a 5/16-24 internal thread
• 15,000 RPM max
• Med... 

Industrial Grade Spray Adhesive

• Spray adhesive for light duty maintenance
• Bonds aggressively to plastics, foils, papers, flexible foam, fab... 

Quickly removes rust, paint, mill scale and coatings from metal

• High-strength fiber resists chunking and performs well on edges
• High conformability provides a larger contact patch for faster removal rates... 

3M PPS Series 2.0 Spray Cup System is the next generation, highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction, 360-degree spray rotation, and sealing and protecting coatings while no... 

3M PPS Series 2.0 Spray Cup System is the next generation, highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction (360° spray rotation) and sealing and protecting coating... 

• NOT compatible with PPS 1.0 cups.
• Adapter converts virtually any cup spray guns into ones that work with 3M PPS Series 2.0, our next generation, highest performing disposable spray cup system
• Provides a four-... 

• NOT compatible with PPS 1.0 cups.
• Adapter converts virtually any cup spray guns into ones that work with 3M PPS Series 2.0
• Provides a four-point lid-to-spray-gun connection and a wider 360° platform for s... 

• NOT compatible with PPS 1.0 cups.
• Adapter converts virtually any cup spray guns into ones that work with 3M PPS Series 2.0
• Provides a four-point lid-to-spray-gun connection and a wider 360° platform for s... 

• NOT compatible with PPS 1.0 cups.
• Adapter converts virtually any cup spray guns into ones that work with 3M PPS Series 2.0
• Provides a four-point lid-to-spray-gun connection and a wider 360° platform for s... 

3M™ PPS™ Series 2.0 Spray Cup System is the next generation, highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction (360° spray rotation) and sealing and protecting coati... 

• NOT compatible with PPS 1.0 cups.
• Adapter converts virtually any cup spray guns into ones that work with 3M PPS Series 2.0, our next generation, highest performing disposable spray cup system
• Provides a four-... 

NOT compatible with PPS 1.0 cups.

3M PPS Series 2.0 Adapter provides four points of connection from lid-to-gun and converts typical spray guns into ones that work with the 3M PPS Series 2.0 Spray Cup System. Specif... 

3M PPS Series 2.0 Spray Cup System is the next generation, highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction (360° spray rotation) and sealing and protecting coating... 

3M PPS Series 2.0 Spray Cup System is the next generation, highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction, 360° spray rotation, and sealing and protecting coatings while ... 

• NOT compatible with PPS 1.0 cups.
• Adapter converts virtually any cup spray guns into ones that work with 3M PPS Series 2.0, our next generation, highest performing disposable spray cup system
• Provides a four-... 

• NOT compatible with PPS 1.0 cups.
• Adapter converts virtually any cup spray guns into ones that work with 3M PPS Series 2.0, our next generation, highest performing disposable spray cup system
• Provides a four-... 

3M PPS Series 2.0 Adapter provides four points of connection from lid-to-gun and converts typical spray guns into ones that work with the 3M PPS Series 2.0 Spray Cup System. Specifically designed adapters allow painters to use PPS with v... 

• NOT compatible with PPS 1.0 cups.
• Adapter converts virtually any cup spray guns into ones that work with 3M PPS Series 2.0
• Provides a four-point lid-to-spray-gun connection and a wider 360° platform for s... 

• NOT compatible with PPS 1.0 cups.
• Adapter converts virtually any cup spray guns into ones that work with 3M PPS Series 2.0
• Provides a four-point lid-to-spray-gun connection and a wider 360° platform for s... 

• NOT compatible with PPS 1.0 cups.
• Adapter converts virtually any cup spray guns into ones that work with 3M PPS Series 2.0 only
• Provides a four-point lid-to-spray-gun connection and a wider 360° platform... 

Next generation, highest performing disposable spray cup system

• New quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading
• Redesigned adapters provide four poi... 

Bright and Highly Visible 3M 233+ Automotive Masking Tape

This 3M green tape is designed to exceed the needs of todays collision repair shops. It is highly comfortable and has a special... 

Highly conformable, provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines

• Goes on quickly and easily, sticks at a touch and stays put
• Perfectly balanced to give ou... 

• 1.2mm replacement heads for 3M Performance Spray Gun with PPS 2.0
• Get like-new spray performance with each new atomizing head
• Exceptional pattern control, atomization and transfer efficiency
• P... 

• 1.3mm replacement heads for 3M Performance Spray Gun with PPS 2.0
• Get like-new spray performance with each new atomizing head
• Exceptional pattern control, atomization and transfer efficiency
• P... 

• 1.4mm replacement heads for 3M Performance Spray Gun with PPS 2.0
• Get like-new spray performance with each new atomizing head
• Exceptional pattern control, atomization and transfer efficiency
• ... 

• 1.8mm replacement heads for 3M Performance Spray Gun with PPS 2.0
• Get like-new spray performance with each new atomizing head
• Exceptional pattern control, atomization and transfer efficiency
• ... 

• 2.0mm replacement heads for 3M Performance Spray Gun with PPS 2.0
• Get like-new spray performance with each new atomizing head
• Exceptional pattern control, atomization and transfer efficiency
• ... 

• Variety pack of replacement heads for 3M Performance Spray Gun with PPS 2.0
• Get like-new spray performance with each new atomizing head
• Exceptional pattern control, atomization and transfer efficiency

Faster. Cleaner. Lighter. Smarter.

The 3M™ Performance Spray Gun was designed specifically to deliver best-in-class performance while saving you time. You will experience faster cleanup, faster changeovers, and faster cy... 

If you plan to correct automobile paint for a great new finish, then it is time to pick up the 3M 3" Pistol Grip Random Orbital Sander. The first choice of professionals and DIY-ers alike, this orbital sander can very easily remove scrat... 

If you plan to correct automobile paint for a great new finish, then it is time to pick up the 3M 3" Pistol Grip Buffer. The first choice of professionals and DIY-ers alike, this orbital sander can very easily remove scratches, paint swi... 

Remove spot welds and work on metal applications including boron steel with 3M File Belt Sander and it will help you perform cleaning, deburring, blending and finishing on areas that are difficult to reach. This sander works well on hard... 

This 3M Low Lint Wool Pad is a fast cutting pad that is 100% wool. It quickly refines abrasives sand scratches on automotive painted surfaces. The pad leaves virtually no lint residue which can lead to inefficient cleanup and rework. It ... 

Do you want to save time and money on you autobody compounding work, then these 3M Perfect-It Foam Compounding Pads. These high performing compounding pads are for refining and removing sand scratches from automotive painted finishes. Th... 

The 3M Foam Polishing Pad helps refine compounding swirls on automotive paint finishes. Single-sided pad features a 4-in. diameter for control and access in small areas or tight spaces. A specially designed foam pad face holds polish and... 

The 3M Perfect-It Ultrafine Foam Polishing Pad features a foam face design and a 4-inch diameter for smaller areas.The Ultrafine Foam Polishing Pad delivers an extremely refined cut to completely remove polish swirls and holograms withou... 

This 3M Perfect-It Paint Finishing Pad Kit includes every pad you need for compounding, polishing and finishing in collision repair. This kit contains Perfect-It foam pads for compounding, polishing and ultrafine polishing, as well as a ... 

For refining sand scratches to help reduce the amount of time spent compounding

• Foam disc used in a spot repair system for removing P1200-P1500 grade sand scratches.
• When work on contour sur... 

Purple Finishing Film Abrasive Disc 260L features an updated coating that levels surface defects on clear coat and greatly reduces pigtails. Aluminum oxide abrasive cuts fast, lasts a long time, resists loading with or without hole patte... 

• Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal
• 3M's fastest cutting, longest lasting abrasive for saving labor costs and improving quality
... 

• Ideal for removing fine sand scratches where buffers won't reach
• Foam backing provides support for removing sand scratches up to P2500 prior to polishing
• Reduces or eliminates compounding, saving time and... 

• Part of the 3M Perfect-It Paint Finishing System for high gloss and deep color paint finishes
• Long lasting, even-wearing abrasive can reduce or eliminate extra materials and even full stages in specific cases
... 

• Part of the 3M Perfect-It Paint Finishing System for high gloss and deep color paint finishes
• Long lasting, even-wearing abrasive can reduce or eliminate extra materials and even full stages in specific cases
... 

• Part of the 3M Perfect-It Paint Finishing System for high gloss and deep color paint finishes
• Long lasting, even-wearing abrasive can reduce or eliminate extra materials and even full stages in specific cases
... 

• Part of the 3M Perfect-It Paint Finishing System for high gloss and deep color paint finishes
• Ideal for refining sand scratches to help reduce the amount of time spent compounding
• Patterned, precise miner... 

Reduce pinholes and primer usage with this exceptional formula! Designed to achieve unparalleled adhesion to galvanized steel, aluminum, E-Coat, fiberglass, SMC, cured epoxy, urethane and primers, this creamy formula is a standalone solu... 

• Features 3M Precision-Shaped Grain, triangular-shaped grains that cut at least 30% faster and last at least 30% longer than other conventional ceramic abrasives
• Extremely sharp precision-shaped grain provides longer li... 

This 80 grit paper is made with aluminum oxide mineral, a tough and versatile abrasive. Designed for hand sanding, each 9 x 11 inch sheet can be cut to the size of your sanding block. During Stage 3 of the 3M Body Repair System use the 1... 

Combines the cut of a compounding pad and the finish of a polishing pad

• Eliminates compounding when used as part of the 3M Perfect-It 1-Step Paint Finishing system
• You can achieve a high-glos... 

Combines the cut of a compounding pad and the finish of a polishing pad

• Eliminates compounding when used as part of the 3M Perfect-It 1-Step Paint Finishing system
• You can achieve a high-glos... 

Combines the cut of a compounding pad and the finish of a polishing pad

• Eliminates compounding when used as part of the 3M Perfect-It 1-Step Paint Finishing system
• Tapered edge protects backi... 

Combines the cut of a compounding pad and the finish of a polishing pad

• Eliminates compounding when used as part of the 3M Perfect-It 1-Step Paint Finishing system
• Tapered edge protects backi... 

The 3M Quick Grip Body Filler is a creamy formula that is easy to sand and bonds easily to galvanized steel. The 3M body filler reduces time to sand and shape. This body filler has quick adhesion to various surfaces, the 3M body filler p... 

Quick Connect System Makes it Fast and Easy to Switch From Pad to Pad

• 8" Double sided low linting 100% wool pad with quick connect/disconnect
... 

Double Sided Pad With More Cutting Power

• 9" Compound pad
• Made of 100% wool
• Provides excellent cut and finish on all composite... 

• High Performance White Foam Compounding Pad used to refine P1200 or finder sand scratches.
• Double sided pad in a convenient 6 inch size for use on small panels or hard to reach areas where buffing is needed. ... 

The pad removes the compounding swirl marks left by either foam or wool pads and can also be used in the 3M Perfect-it Paint Finishing System for paint and clear coats repair when the finest finish is required. Finish results are depende... 

• High performance ultrafine foam polishing pad eliminates swirl marks onpainted surfaces, even on dark colored cars.
• Double sided pad inconvenient 6 inch size.
• Use with 3M Perfect-It Ultrafine Machi... 

• Highest performing double sided wool compounding pad.
  
• QuickConnect attachment system - quick and easy to attach pads to polishers, plus they perfectly center each pad every time.
  ... 

Lasts up to 5 times longer for increased productivity!

Engineered for faster cutting, sustained performance, durability and increased throughput, our 3M Cubitron II Roloc Fibre... 

Lasts up to 5 times longer for increased productivity!

Engineered for faster cutting, sustained performance, durability and increased throughput, our 3M Cubitron II Roloc Fibre... 

Contains 3M precision-shaped abrasive grain, coated on a heavy duty backing. Resin bonded for heat resistance. Coated with a dry grinding aid to help reduce heat build up.

Key Features 3M Cubitron II File Belt:... 

Contains 3M precision-shaped abrasive grain, coated on a heavy duty backing. Resin bonded for heat resistance. Coated with a dry grinding aid to help reduce heat build up.

Key Features 3M Cubitron II File Belt:... 

The 13-inch 3M File Belt sander allows technicians to access hard-to-reach areas and are great for spot weld removal, deburring, cleaning, and finishing.

3M Mini File Belt Sander 3/8" x 13" - 33573

... 

The 18-inch 3M File Belt Sander allows technicians to access hard-to-reach areas and are great for spot weld removal, deburring, cleaning, and finishing.

3M File Belt Sander 1/2" x 18" - 33575

• R... 

• Powerful .45 HP motor delivers up to 18,000 RPM
• Weighs less than 1.5 lbs. for versatility and ease of use in tight spaces
• Balanced motor and comfortable molded pistol-style grip decrease vibration and noi... 

The 3M Cut-Off Wheel Tools deliver the performance you need when working with tough automotive substrates. When paired with 3M Cubitron II Cut-Off Wheels, technicians can slice through even high-strength steel and aluminum with clean, st... 

Do you have a bothersome plastic panel on your car that is impossible to keep in place? Bring in the 3M Semi-Rigid Plastic Repair 34240 adhesive for the job. The 3M plastic repair system is a high performance, semi-rigid, two component u... 

• Ideal for hand sanding applications including primer sanding, blend preparation and paint fin... 

Developed for superior cut and long life during key stages in auto body repair. Its long lasting triangular shaped grain and multi hole pattern for superior dust extraction make the sheet ideal for paint removal, rough body filler shapin... 

A best-in-class abrasive sheet roll for the entire repair and paint prep process

• Engineered ceramic mineral blend is balanced for maximum abrasive performance in its class
• Multi-hole pattern del... 

Great for Paint Removal and Sanding Filler

• Features a ceramic mineral blend that cuts through paint and body filler with consistent results
... 

• Specially engineered surface protection material protects collision repair shop walls and floors
• Nonwoven construction traps airborne contaminants, helping to control dust and overspray
• Low-tack adhesive bac... 

Upright metal dispenser equipped with foam roller to apply 3M Dirt TrapProtection Material to floor areas. Applies material quickly andwrinkle free to brighten work areas while trapping airborne dust anddirt resulting in a cleaner repai... 

• Disposable paper floor mat designed to protect Automotive floors during maintenance and repair
• Unique non-slip technology keeps floor mat in place
• Length: 19"
• Width: 17"

Used on both the high and low pressure back-mounted combination kits

Replacement breathing tube

Use as a replacement part for 3M(TM) Full Facepieces 6700, 6800, 6900 (07138, 07139, 07140 AAD)

**Respirators are non-returnable**

Incorporates Innovative Design Features to Increase Respirator Comfort for the Automotive Technician... 

Replacement kit includes 2 high efficiency particulate filters, 6 prefilters and 2 spark arrestors.

**Respirators are non-returnable**

• Painter's hood with inner shroud
• Protects against particles, gases and vapors
• For use with certain 3M Powere... 

• Fits over the standard visor and protects it from scratching or overspray of paint and chemicals
• The Versaflo M-926 lens covers fit the M-925 Standard visor, and the M296 and ... 

• Made from polycarbonate, the 3M Versaflo Standard Visor M-925, 37323 is an economical, easy-to-replace visor for all 3M Versaflo M-Series products.
• Includes five visors per case
• Includes one M-921 Visor ... 

• Lightweight system
• Provides great eye and face protection
• Recommended for use as a painter's respirator kit
• Excellent peripheral and downward vision
• Two-position adjustable airflow... 

This Versaflo filter is a combination High Efficiency (HE) particulate filter and Organic Vapor (OV) cartridge for use with TR-600 series PAPRs. 3M recommends the use of the TR-6500FC filter cover to help protect the filt... 

• Use for final sanding of primer-surfacer
• Great for cleaning, scuffing, deburring and finishing
• Can be used with water and solvents
• Does not rust like steel wool
• Ultra fine finishin... 

Ideal for fire-resistant coverings of components and wire assemblies

• Versatile assortment of flexible polyolefin heat shrink tubing in a variety of 6 sizes and 7 color... 

37716 - 32 fl. oz. flourinated bottle

• Used to dispense 3M Body Shop Clean-Up Products
• Spray Nozzle sold separately

37717 - Spray Trigger Nozzle Head

• Use with waterbased 3M Detailing products.
• Long lasting, high output, adjustable, general purpose spray trigger nozzle head used with the 3M Detailing Spray B... 

• Ketchup style squeeze bottle
• Includes spout top
• Use for dispensing compounds, glazes, polishes and liquid wax
• Can also be used to dispense solvents to clean spray gun in 3M™ Paint ... 

The 3M Static Mixing Nozzle 50mL helps in efficiently mixing a host of 3M two-component adhesives, foams, and sealers. This high-performance mixing nozzle is designed specifically for 50 mL cartridges. This mix/meter nozzle helps in sque... 

Looking for a strong adhesive for your automobile repair work? The 3M Panel Bonding Adhesive has excellent adhesion and can be used on both plastic and metal substrates like cold roll steel or aluminum. Even though the two-part epoxy for... 

• Four step process that restores the clarity of yellowed, hazed, or dull headlight lenses.
• Kit contains sanding discs and polishing pad with compound.
• For use with a drill.

Kit Includes... 

• High performance detailing cloth
• Super soft, non-linting
• Removes oily or filmy residue including waxes, polishes, glazes and finger prints without scratching
• Safe for use on painted/ clear coa... 

Our 3M Perfect-It EX Ultrafine Machine Polish quickly and completely removes ultrafine swirl marks, even on difficult dark-colored vehicles. It stays wet longer, letting you use less material for a refined finish. Yet it also holds bette... 

• Uniquely formulated to remove compound swirl marks
• Contains no waxes or silicones
• Best for dark colored paint finishes
• Grey colored glaze
• Less clean up required

3M Marine High Strength Repair Filler restores damaged areas of fiberglass hulls, decks and other areas on boats. Our filler is a high performance product that is reinforced with short strands of fiberglass for added strength. Boat resto... 

The Dynatron Dyna-Glass Fiberglass Reinforced Filler is twice as strong as any regular body filler. This polyester filler contains short strand fiberglass that is perfect for waterproof repairs. The short strand fiberglass filler is used... 

Looking for a good quality product for sealing gaps, joints, or cracks? Try the Dynatron Auto Seam Sealer Grey Caulk. A caulk is typically used to seal cracks that are less than 1/4" in width. This product portrays superior adhesion to b... 

• Two part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
• The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins
... 

Balance Wheels for a Smoother Ride

A flexible, conformable lead-free, corrosion free wheel weight system. Uses 3M Tape technology to ensure adhesion performance... 

• 3M Wheel Weight Universal Cutting Tool PN61479 (TN201) is used to easily cut 3M Wheel Weights to exact length.
• Easy to read scale determines exact weight in gram or 1/4 oz increments.
• 3 replacem... 

This rugged and lightweight stand is exclusively designed to hold the 3M Wheel Weight System self-dispensing package. The 3M Cutting Stand TN-252 is also designed for secure mounting to shop work area floors and adjusts in height for con... 

• Aggressive and long-lasting non-woven belt is reinforced with low stretch backing for durability
• Great for deburring, finishing, blending and cleaning
• Produces a fine and consistent finish
• 1&#... 

Can be folded, stacked, or rolled for effective cleaning or conditioning on flat, irregular, or contoured surfaces

• Tightly graded with more active mineral sites for fast, consistent action
• Suit... 

Ideal for everyday uses like prepping surfaces for color coat, general scuffing, cleaning and hand blending

• Superior alternative to steel wool, wire brushes, sandpaper, and other non-woven products for cle... 

Alternating red and white, highly reflective, microprismatic sheeting with pressure sensitive adhesive for easy application to trucks, trailers and large vehicles to enhance visibility and detection distance.

• Diamond Grade... 

Solid white, highly reflective, microprismatic sheeting with pressuresensitive adhesive for easy application to trucks, trailers and largevehicles to enhance visibility and detection distance.

• Diamond Grade
• Hig... 

Reinforce Your Fiberglass Repairs

• Strong but flexible
• Patch larger holes in metal damage to fiberglass panels
• For use in the repair and restoration of SMC, metal, wood, fiberglass a... 

Reinforce Your Fiberglass Repairs

• Strong but flexible
• Patch larger holes in metal damage to fiberglass panels
• For use in the repair and restoration of SMC, metal, wood, fiberglass a... 

• Finesse-it wool buffing pad
• Hook-it attachment system
• 3 inch diameter x 15/16 trim length
• Wool blend material
• Application: Cured Paint, Fresh Paint Finishes,... 

The TR-800-PSK is a complete Powered Air Purifying Respirator with an Intrinsically Safe motor/blower that includes everything required to get started for use in Paint Spray operations.

• The new standard in intrinsically sa... 

Used to protect the door edges of vehicles from potential nicks and abrasion.

Stop worrying about your vehicle's external finish when you have the Scotchgard™ Paint Protection Film Pro Series. The clear-co... 

The Wheel Weight System Starter Kit contains:

• (1) Wheel Weight Universal Cutting Tool
• (1) Wheel Weight Cutter Stand
• (1) 5-lb. box of 7mm x 15mm 3M Wheel Weight
• (1) Removal Tool
... 

PPS red lid and liner dispensers feature clear front panels to allow for easy viewing of the contents. New liner dispensers efficiently & effectively dispense Large, Standard & Midi sizes.

• Clean, closed and profess... 

• Short-strand milled fiberglass adds strength and stability
• Excellent for reinforced repairs to holes, cracks and tears under traditional body filler
• High-resin gel makes for exceptional sag resistance ... 

**Respirators are non-returnable**

This disposable N95 particulate respirator features the proprietary 3M Cool Flow Valve and helps provide comfortable, reliable worker respirat... 

**Respirators are non-returnable**

• Unique center adapter directs exhaled breath and moisture downward, and helps reduce debris from depositing in the valve.
... 

Make light work of heavy coatings.

Designed to work with the 3M™ Performance Spray Gun (3M-26778), you will have more application control of heavy or texture coatings.

The easy-to-install H/O Co... 

• Pressurized hard cups and collars use with 3M™ PPS™ Series 2.0 spray system
• Designed to efficiently spray thick, high viscosity liquids
• 3M™ PPS™ is an all-in-one disposable solutio... 

• Pressurized hard cups and collars use with 3M™ PPS™ Series 2.0 spray system
• Designed to efficiently spray thick, high viscosity liquids
• 3M™ PPS™ is an all-in-one disposable solutio... 

Designed specifically to make working in an auto body shop more efficient and productive.

• Provides storage for nonflammable and non-combustible automotive products
• Shelves allow fo... 

A Spray-On Layer That Bonds and Protects

Mar-Hyde™ Single Stage Self-Etching Primer Aerosol is great for a variety of small paint prep applications in collision repair. It forms a durable bond with the subst... 

3M 80 grit Stikit™ Sanding Disc delivers outstanding tear resistance, flexibility and a consistent, uniform finish on a variety of substrates.  Premium aluminum oxide abrasive grain offers a fast cut-rate and extended product ... 

The open net structure in the new 3M™ Cubitron™ II Net Abrasives provides a virtually dust-free environment.

Available in: 80, 120, 150, 180, 220, 240, and 320 Grade.

Features... 

An advanced abrasive for the body panel repair process at a competitive price!

3M™ Blue Net discs provide excellent dust removal for most applications and repairs when used on existing or new dust extraction systems.

Scotch-Brite™ Roloc™ Clean and Strip XT Pro Disc features silicon carbide abrasive minerals incorporated into an open nylon web.  It effectively removes rust, paint, mill scale, coatings, and adhesives form surfaces with... 

3M™ Hookit™ Clean Sanding Low Profile Finishing Disc Pad is constructed of soft density foam with a 10 degree blunt tapered edge and is recommended for finishing applications on flat or contoured surfaces where dust evacuatio... 

3M™ Hookit™ Clean Sanding Low Profile Finishing Disc Pad is constructed of soft density foam with a 10 degree blunt tapered edge and is recommended for finishing applications on flat or contoured surfaces where dust evacuatio... 

• 50 disposable lids with 200 micron filters
• 50 disposable liners and 20 sealing plugs
• For use with the 3M-16122

Note: mix ratio insert is purchased separately.

3M OEM Match Adjustable Ripple Tip is a single-use solution for 3M 2-Part Heavy Bodied (08308) and Bare Metal Seam Sealer (08310) to help replicate the original look and appearance of seam sealer applied at the factory.

• ... 

These 3M™ Hookit™ blocks combine the flexibility of traditional foam blocks with the dust extraction power and control of the dust free sanding blocks.

When used with a vacuum system and compatible abrasives, this 3M... 

These 3M™ Hookit™ blocks combine the flexibility of traditional foam blocks with the dust extraction power and control of the dust free sanding blocks.

When used with a vacuum system and compatible abrasives, this 3M... 

These 3M™ Hookit™ blocks combine the flexibility of traditional foam blocks with the dust extraction power and control of the dust free sanding blocks.

When used with a vacuum system and compatible abrasives, this 3M... 

These 3M™ Hookit™ blocks combine the flexibility of traditional foam blocks with the dust extraction power and control of the dust free sanding blocks.

When used with a vacuum system and compatible abrasives, this 3M... 

These 3M™ Hookit™ blocks combine the flexibility of traditional foam blocks with the dust extraction power and control of the dust free sanding blocks.

When used with a vacuum system and compatible abrasives, this 3M... 

Go for performance.  Leave the dust behind!

If you need to hand finish a tight spot, you can rely on the 3M™ Hookit™ Dust Extraction Flexible Radius Sanding Block. This foam block helps you flex around curved sur... 

Go for performance.  Leave the dust behind!

If you need to hand finish a tight spot, you can rely on the 3M™ Hookit™ Dust Extraction Flexible Radius Sanding Block. This foam block helps you flex around curved sur... 

Go for performance.  Leave the dust behind!

If you need to hand finish a tight spot, you can rely on the 3M™ Hookit™ Dust Extraction Flexible Radius Sanding Block. This foam block helps you flex around curved sur... 

Go for performance.  Leave the dust behind!

If you need to hand finish a tight spot, you can rely on the 3M™ Hookit™ Dust Extraction Flexible Radius Sanding Block. This foam block helps you flex around curved sur... 

3M™ Performance Gravity HVLP Atomizing Heads are designed to deliver premium spray performance for coatings including paints, clear coats and topcoats. Replaceable nozzles are built exclusively for gravity feed applications with th... 

With its versatile design, technicians can spray from either a pressurized source or a gravity cup. The pressure-fed hose and nozzles allow for continuous bulk spraying for larger jobs. Or for spot repairs and small areas, convert the sp... 

The unique 3M™ Performance Spray Gun Locking Collar helps ensure a solid connection between the 3M™ Performance Spray Gun and 3M™ Performance Atomizing Heads. The locking collar is easy to use, allowing for quick nozzle... 

The 3M™ Performance Spray Gun Needle is designed specifically for 3M™ Performance Spray Gun. The stainless steel construction is engineered for a leakproof seal when the trigger is released and precise flow control when the t... 

The 3M™ Performance Spray Gun Rebuilt Kit includes the pieces required for a complete rebuild of the 3M™ Performance Spray Gun. Ideal for helping to reduce downtime on the job with quick and easy reassembly of the spray gun. ... 

3M™ Performance Pressure HVLP Atomizing Heads are designed to deliver excellent spray performance for coatings including stains, primers, base coats, topcoats, clear coats and adhesives. Replaceable nozzles are built exclusively fo... 

3M™ Performance Pressure HVLP Atomizing Heads are designed to deliver premium spray performance for coatings including, including stains, primers, base coats, topcoats, clear coats and adhesives. Replaceable nozzles are built exclu... 

3M™ Performance Spray Gun Ball Valve is an accessory for the 3M™ Performance Spray Gun System configured as a pressure feed sprayer. The valve gives the spray gun operator the ability to stop the flow of paint from the pressu... 

Adhesive-backed clear film protects lights and windows from overspray buildup. No more scraping and cleaning fragile surfaces, simply peel off the film and re-apply. Replace window film when heavily coated with overspray or within six mo... 

Mar-Hyde™ Black Satin Automotive Trim Coating delivers extremely durable coated protection to metal and plastic surfaces. This coating is ideal for exterior auto trim – it adheres to surfaces including aluminum, steel, stainl... 

**Respirators are non-returnable**

3M™ Particulate Respirator 8210, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory prote... 

• Precision-balanced steel workings run smoothly with less vibration, ideal for high production industrial environments
• Improved durability, ergonomics and noise level maximize comfort and control for prolonged use

Leave the dust behind. When it comes to efficient sanding, dust is the enemy. Keep your substrates and workplace clean with 3M Xtract™ Filter Bags. Combined with 3M Xtract™ Net Discs and 3M Xtract™ Random Orbital Sander... 

Humid Weather? Choose a tape that's up for the tack.

• High temperature resistance up to 230° F (110°C)
• High adhesion in humid environments
• Sticks easily with excellent holding power.
...