• Transtar Kicker Accelerator is designed to accelerate the curing, dust, tack and tape times of Transtar acrylic urethane primers and clea... 

Basecoat for an intense black finish!

Jet black basecoat designed to match the OEM appearance on many domestic and foreign vehicles

• Does not need mechanical a... 

Transtar Primer Provides Good Corrosion Resistance

If you own a body shop and are particular about using good-quality products, you must already be familiar with the Transtar 2 in 1 Primer. This... 

Use the Transtar Bond-Tec Mul-Tie Adhesion Promoter & Tie-Coat to improve the hold, durability, and look of different kinds of finishes. Even with tough plastics such as polypropylene or TPO, this coating works just fine. It can also... 

Multi-Purpose Waterborne Cleaner!

Transtar's Auqa SCAT 2 Waterborne Degreaser is a specially formulated, water-based degreaser that can be used on all plastics, metal and... 

Ultra Flex Seam Sealer a solvent based seam sealer that provides fast paint times with outstanding tooling. Can be painted in 30 minutes. Product provides excellent adhesion on a variety of surfaces. Can be used to seal any body seam aga... 

Ultra Flex Brushable Seam Sealer is a rapid curing, fast skinning, brush grade formula that can be painted in 30 minutes. It was developed to match OEM appearances found on flat seams in trunk areas, wheel housing, and pick-up truck hol... 

Paintable in 30-45 Minutes!

The Transtar Tex Coat Chip Guard is a must-have product for all automobile DIY-ers. It is a flexible protective coating that rapidly dries up. This product is easy to... 

Quick Dry Rubberized Undercoat is a rapid-drying highly protective automotive coating for autobody interiors and underhood applications.

The Transtar Quick Dry ... 

Rubberized Undercoat effectively seals out dust, fumes, heat and cold. Provides excellent adhesion and will not crack or chip under normal conditions. Designed to protect underbody areas from moisture, while deadening sound.

... 

Amber Rustproofing matches OEM appearance while providing superior rust protection.

Give your vehicle an effective and dependable protection from harmful rust w... 

Application Kit Includes: 2 each 36-inch tubing with 360° tip, 1 each 36-inch tubing, 2 each short tubes and 6 extra aerosol buttons.

The Urethane Windshield Adhesive is a ready to use, one part moisture curing adhesive that provides a strong bond to all windshield and backlight replacements. It is compliant with the strength requirements of FMVSS 201, 212 and 216.

Attachment Tape Adhesion Promoter is specifically formulated for use with Transtar Attachment Tape. It is a liquid primer used for enhancing adhesion of most low surface energy plastics (TPO, PPO, PP, PC, etc.) as well as injection molde... 

2 in 1 Trim Black is a tough, flexible polymer coating designed to restore bumpers and flexible or rigid trim to their OEM condition. Transtar offers 3 gloss levels, matte, satin and gloss, to match the appearance on most vehicles. Excel... 

Lacquer Primer

Universal Primer is a high quality lacquer (nitrocellulose) primer surfacer with good filling and sanding characteristics. Universal Primer dries fast and provides very good top... 

Transtar Finish-Tec 1K Speed Sealer is a ready-to-spray acrylic sealer with good holdout properties and excellent adhesion. This non-sanding sealer is ideal for spot and panel refinishing and is designed to provide excellent DOI under a ... 

The Transtar 2K Self-Etching Primer is a two part self-etching and passivating primer that retards the corrosion process. The primer and primer activator has an easy 1:1 mix ratio and requires no induction time before its use. This syste... 

Activator for Transtar's 2K Self-Etching Primer

Technical Specifications

• Mix Ratio 1:1 by volume
• Color: Olive Green
• Size: 1 gallon or 1 quart

No induction time required. Direct to Metal.

Hasn't it always been the dream of the DIY enthusiast in you to put on your overalls and give your favorite ride a touch-up? Or to give your faith... 

The Transtar 2K Epoxy Primer/Sealer is an excellent option when sanding through the finish. The primer/sealer requires no induction time and can be applied directly to metal. You can easily apply this primer/sealer over paint, sanded bar... 

No induction time required. Direct to Metal.

2K Epoxy Primer Sealer is an exceptional lead and chromate free corrosion resistant primer with excellent adhesion on a variety of substrates. It can be used to protec... 

No induction time required. Direct to Metal.

2K Epoxy Primer Sealer is an exceptional lead and chromate free corrosion resistant primer with excellent adhesion on a variety of substrat... 

Ready to Use Formula. No Mixing, No Waste!

Self Etching 1K Primer is a ready to use one component metal etching primer. It provides excellent adhesion and prote... 

Use the Transtar Jammin' Clear to perform panel repairs and small spot repairs on your vehicle. This product works best when you have to perform repair work on door jambs, trunk jambs, hoods and replacement parts. The acrylic clear coat ... 

Kwik Seal 2K Urethane Sealer has been specifically formulated as a premium quality sealer to be used over a variety of substrates. Kwik Seal offers excellent adhesion to bare metal, aluminum, SMC, fiberglass, old paint finishes and all T... 

Kwik Seal 2K Urethane Sealer has been specifically formulated as a premium quality sealer to be used over a variety of substrates. Kwik Seal offers excellent adhesion to bare metal, aluminum, SMC, fiberglass, old paint finishes and all T... 

Activator Specifications:

• Size: 1/2 Pint
• Color: Activator
• Category: Primer Sealer
• Actual V.O.C.: 5.3#/gal
• Regulatory V.O.C.: 5.3#/gal
... 

SCAT Wax and Grease Remover is a unique solvent blend formulated to quickly and easily remove wax, silicone, grease and oil from automotive paint surfaces for easy wipe up. SCAT also provides a light etching action for improved adhesion... 

Speedi SCAT is a specially formulated solvent blend for lifting and removing wax, silicones, grease, oil, and other potential contaminants from surfaces to be painted. This product quickly dries for a residue free surface. Speedi SCAT is... 

Blend Away Your Overspray!

The Transtar Melt Away Edge Blender is an amazing product that melts away the edges left by primer, sealer, or clearcoat oversprays. ... 

The Transtar 2K EZ Sand Acrylic Urethane Primer Gray provides exceptional fill and build characteristics. It provides a base that yields excellent top coat hold out, gloss and distinctness of image (DOI). It sands wet or dry easily, and ... 

2K Kwik Prime Direct to Metal is a two component primer surfacer that can be applied direct to metal surfaces. It is quick drying and easy to sand wet or dry. Kwik Prime provides corrosion protection along with excellent fill and build p... 

2K Kwik Prime Direct to Metal is a two component primer surfacer that can be applied direct to metal surfaces. It is quick drying and easy to sand wet or dry. Kwik Prime provides corrosion protection along with excellent fill and build p... 

Appearance Improver, 6487, is specially formulated for use in high temperatures and/or on extremely large refinish areas. 6487 will improve flow out and appearance of all Transtar Clearcoats used in conditions where temperatures exceed 9... 

2.1 Low V.O.C. 2K Acrylic Urethane Primer is a premium lead/chrome free two component acrylic urethane primer surfacer. 6561 provides exceptional fill and build and provides a base which yields excellent top coat hold out, gloss and D.O.... 

Transtar Urethane Grade Reducers are designed to be used with Transtar Urethane Primers and Clearcoats. These reducers can be used with virtually any brand of primer, basecoat or clearcoat that requires a urethane grade reducer. Reducers... 

Transtar Fisheye Remover is an additive specially formulated to help avoid and prevent fisheyes. This product can be used with virtually all types of urethane and non-urethane 2K topcoats. Use for a smooth finish over surfaces that show... 

The Transtar Low V.O.C Kwik Gloss Acrylic Urethane Clearcoat is an acrylic urethane based clear coat with a sprayable VOC of 4.2 lbs. per gallon, while using the EPA test method 24. It is an excellent choice when speed is required witho... 

Specifically designed to crosslink with selected Transtar's Clearcoats - 6531, 6571, 6801, 6841, 6861, and 7761-MTR to provide a long lasting high gloss finish. Ideal for spot & panel repairs and for use in cool/cold temperatures... 

Specifically designed to crosslink with selected Transtar's Clearcoats - 6531, 6571, 6801, 6841, 6861, and 7761-MTR to provide a long lasting high gloss finish. Ideal for spot & panel repairs and for use in cool/cold temperatures... 

Designed for use in temperatures between 65° - 80°F (19° - 27°C) or for spot & panel applications.

Extra Solids Acrylic Urethane Clearcoat A... 

Specifically designed to crosslink with selected Transtar's Clearcoats - 6531, 6571, 6801, 6841, 6861, and 7761-MTR to provide a long lasting high gloss finish. Ideal for spot & panel repairs and for use in cool/cold temperatures... 

2K Acrylic Urethane Primer (Gray) is a premium lead/chromate free, two component acrylic urethane primer-surfacer for basecoat/clearcoat refinishing. 2K Gray provides excellent fill and build characteristics, and sands easily wet or dry ... 

Technical Sp... 

Transtar Basecoat Balancers, Binders, Converters have been formulated as comparable offerings for the most common major manufacturer's products. Since these are similar products, they are intended for use in a comparable manner (1 for 1 ... 

The Transtar Euro Kwik Clearcoat is a clearcoat used for most automotive refinish projects as well as with trucks and equipment. The clearcoat has a sprayable V.O.C. of 3.5 lb/gal (using EPA Test Method 24). The product meets National Ru... 

The Transtar Euro Classic DTM Primer is a two component primer surfacer that is applied to metal surfaces directly. The quick-drying primer reduces cycle time which translates into material and labor savings. The primer is easy to sand, ... 

DIRECT TO METAL

Euro Classic Primer is a two component primer surfacer that can be applied direct to metal surfaces. It is quick drying and easy to sand wet or dry. It provides ... 

Transtar's Basecoat Reducers have been formulated as a comparable offering for use in Dupont's ChromaBase and ChromaPremier Basecoat colors. These new Basecoat Reducers will improve overall appearance for a smoother basecoat finish and b... 

Get the advantage of exceptional gloss and low overspray with the Transtar Max Clearcoat. Thanks to the flash feature, this finish does not attract dirt and dust. Hence, it cuts down the cost of labor required for buffing or polishing th... 

Low Spot Finder Guide Coat is a specialty coating that will provide the technician with a visual aid to ensure primed surfaces are totally smooth and even. It's a quick and efficient method to find uneven or low spots on body filler, pri... 

Acry Solvent adhesive cleaner quickly softens and removes adhesives, tar, grease, oil, body sealers, wax, undercoating overspray and silicones.

• Safe for use on automotive finishes when used as directed
• Can al... 

• National Rule Compliant
• Two-component, universal urethane clearcoat
• Fast-drying and provides excellent gloss
• Use for spot, panel and overall refinish jobs
• Tack surface thoroughly b... 

Transtar Basecoat Balancers have been formulated as comparable offerings for the most common major manufacturer's products. Since these are similar products, they are intended for use in a comparable manner (1 for 1 by volume) as the col... 

Signature Series Speed Clearcoat is a medium solids, ultra fast cure clearcoat for spot and panel topcoating. Productivity is increased with 10 minute dust, 20 minute touch and 30 minute polish times.

Clearcoat Available in ... 

Clearcoat Activators are specifically designed for high productivity shops using Transtar Clearcoats. Activators are suitable for use in clearcoat applications over single stage topcoats and for base/clear applications (except lacquers).... 

Transtar's® Urethane Grade Reducers are designed for use in Transtar's urethane primers, topcoats and clearcoats. Additionally, they can be used in virtually all brands of urethane primers, topcoats and clearcoats. These reducers mus... 

• Universal flexible flattening (matting) additive for use in all Transtar urethane clearcoats and most competitive urethane clearcoat systems.
• It provides three different gloss levels with easy addition.
... 

Ready to Use Formula. No Mixing, No Waste!

Self Etching 1K Primer is a ready to use one component metal etching primer. It provides excellent adhesion and prote... 

• Deep Gloss Baking Clear is a premium 2K, clearcoat that is specifically formulated for bake booths, provides excellent film build, able to match OEM finishes, easy to polish, and provides a high gloss finish.
• Yo... 

Transtar 1K Low VOC Speed Sealer is a ready-to-spray acrylic sealer with good holdout properties and excellent adhesion. This non-sanding sealer is ideal for spot and panel refinishing and is designed to provide excellent DOI under a wid... 

• A ready-to-use primer to aid in MIG/TIG welding.
• Weld Through Primer offers high resistance to salt and water, providing excellent corrosion protection to the weld area.
• Quick drying and water-resistant ... 

Spartan Reducers deliver a combination of value and quality for use in primers, sealers, clearcoats and other refinish products. They are compliant with the National Rule overning VOC emissions. Note: Spartan Reducers are not compati...