• Forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity
• Made in USA

... 

• 5 Ton, 2 Long Jaw, Rev., 6"
• Made in USA

• Pullers are forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity
• 7 ton, 2/3 jaw with maximum reach of 5", maximum spread 10-1/2"
• Made in USA

• Industry standard couplers are interchangeable with leading manufacturers units
• Snap together design of extension tubes allows for easy assembly
• Sturdy extension tubes hold up in even the toughest situati... 

Give your workshop the very efficient, OTC 10-Ton Stinger Collision Repair Kit. This set includes a single-speed hydraulic hand pump, hose, and ram. The components snap in place to give you quick setup for pushing, pulling or spreading t... 

• 4-ton collision repair set.
• Has single speed hydraulic hand pump and ram with 5" stroke.
• Components sn... 

OTC Car Dollies Load Up to 1,800 lbs. Each

These vehicle dollies from OTC work wonderfully even without tires on the car and are adjustable for varying sizes!

• Clamps d... 

The OTC 1725 Three-Point Engine Support Bar has a cutting edge (patent pending) design that ensures the load is self-centered, to prevent tipping on inclined surfaces. It has smooth sliding legs that adjust easily to a variety of vehicle... 

• Sockets are made of high-s... 

• Truck wheel bearing locknut socket has 3/4" square drive opening
• Permits the use of... 

• Truck wheel bearing locknut so... 

• Sockets are made of high-s... 

Wheel Bearing Locknuts Are Easy To Remove Or Install With These Specially Designed Sockets

• Sockets are made of high-strengt... 

• S cam replacement top for OTC 7069A
• Made in USA

For Cummins engines: 

• All NH, NTC, NTE, N14 855 series in-line 6 cyl
• 378 series V6; 504, 555
• 903 series V8; KT 1150 series in-line 6 cyl., L10.&nb... 

• Replacement adjusting cone
• Fits OTC 1179 8-Way Slide Hammer

• Ideal all-around power source develops 10,000 PSI at 100 PSI air.
• 2-stage release mechanism; internal relief valve.
• Pump, hold, or release load with pedal control.
• 1/4" NPT Air Inlet

• 2" outside diameter
• 1-3/4" inside diameter

• Replacement forcing screw
• Fits OTC 7503 Outer Tie Rod Remover

• Threaded trunnion
• Fits OTC 6494 Strut Spring Compressor

• For OTC Hub Tamer/Grappler Kit

• Subaru

• Subaru

• Replacement forcing screw

Documents

 ... 

• Replacement Receiving Tube

Documents

 ... 

• Now with Brake service, steering service, oil and battery resets, including EPB caliper, steering angle and
• BMW brake pad sensor resets
• Enhanced powertrain coverage for Domestic, Asian, and European vehi... 

• Forcing Screw
• Fits OTC 13 Grip-o-matic Pullers: 1039, 1040, 1041 and 1042
• Also Fits OTC 10-ton Grip-o-matic Pullers: 1060 and 1061

Bring in the OTC Air/Hydraulic pump that can be used as an all-around power source for various frame, body, and alignment applications. The hydraulic pump consists of an internal relief valve that protects the hydraulic components of the... 

This all-new rear suspension bushing tool for Heavy Duty vehicles makes Pivot and D-pin bushing removal and installation easier tasks.  Because the patented design allows the tool to be mounted to the suspension piece, the weight of... 

• 1100 pounds capacity.
• Adjustable range: 57" x 27" width.
• Features two hook assemblies for ease of use.
• Tubular steel construction for long life.
• Rubber padded support legs ensure s... 

If you're replacing an axle bearing and its accompanying seal, the OTC Adjustable Bearing Race and Seal Driver is a critical tool, designed to make this often-challenging process quick and painless. The tool is universal and fully adjust... 

Tools Are Made Of Plastic To Prevent Damage To Trim, Moldings, Alloy Wheels, Or Vehicle Paint

• Set includes five different si... 

• Allows technician to access the flat-type hose clamps located in hard-to-reach areas.
• Pliers has locking mechanism to hold clamp in the open position, making removal and installation of clamp easier.
... 

• Properly replaces pressed-on power steering and alternator pulleys on Ford, Chrysler and late GM engines
• Housed in a blow-molded plastic storage case

• A bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage... 

• Set includes drop-forged comp... 

• Heavy-Duty Oil Filter Wrench 
  
• Fits filters ranging from 4-1/8" to 4-21/32" (104 mm to 118 mm) in diameter. 
  
• Features a 1-1/2" wide steel band that can stand up to the high to... 

• Forged jaws with sure-grip teeth grab the filter for easy removal. 
  
• Slip-joint ratchet and lock mechanism allows a secure grip on filters ranging from 2-1/4" to 5" (57 mm to 127 mm) in diameter. Pliers... 

Pulls Flange-Type Rear Axles and
Most Front-Wheel Drive Hubs... 

• Durable set of heat-treated chrome vanadium steel punches and chisels
• Storage tray included

• Designed to remove and install frost plugs used in liquid-cooled gas and diesel engines found in automobiles, trucks, SUVs, agricultural equipment, and construction equipment
• Simply use a hammer with the driver and a... 

Safety Protective Handle For Easy Grip & Protect Hands From Being Hit

• 12 punches and chisels Included: 5 flat chisels: 1/2, 5/8, 3/4, 7/8, ... 

• Loosens hard-to-turn screws, bolts or nuts. Handle design prevents possibility of hitting hand with hammer when striking impact driver
• Bit holder 1/2" drive and 5/16" hex for Phillips and flat screwdriver bits

• Easy-to-use clamps designed for placement on hood/lid strut rods preventing the body component from falling of sagging.
• Great for vehicles and shrouds with weak or dry struts.
• Simply place over strut rod ... 

This easy to use and read tool allows for accurate belt tension to be set after belt replacement, adjustment, or wheel service. Use on secondary drive belts with a 10 lb. spec. 

Instructions:

... 

Savetime removing air from brake system by doing all the wheels at the same time;also eliminates the need for an assistant. Hoses easily attach to bleederscrews, which hold hoses in place and prevent leaking. Check valve on end ofhoses p... 

One Gauge Checks The Amount Of Free Play Between The Yoke And The Bearing's Wear Pad

• The gauges in this set en... 

• Replacement adapter
• For use with Hub Tamer Elite Front Wheel Drive Service Tool Set

The OTC Brake Anchor Pin And Bushing Service Set is a special set of tools that includes everything you need for removal and replacement. With this set, there is no need to remove the bearing hub assembly just to replace the pins and bus... 

The OTC Heavy-Duty Power Steering Pump Analyzer is highly useful in troubleshooting problem areas in a heavy duty power steering system. It comes with a flow and pressure reading meter that measures 1 to 10 gallons of oil flow and up to ... 

• Heavy-duty construction capable of toting 300 pounds
... 

• Replacement adapter tube for 6575 Hub Grappler

• 30in Long
• Replacement part for DPF Cleaner # 5280

Ships by truck freight. You will be contacted with final shipping charges.

• Extra long 25" flex hose gauge assembly with... 

Quickly diagnose internal engine problems such as bad rings, valves and leaking head gaskets. Kit come complete with adapters for most applications.

• Dual 2-1/2" gauges feature chrome bezel and... 

• Unique "Convex Slip Head" curved design allows the spoon to slide easily into the tire bead while the spoon bump limits the depth for quick-and-easy operation.
• Handle knob enables easier spoon pick up 
... 

Updated 53-piece Master Torx Bit Socket Set plus special 24mm External Torx PLUS Socket (p/n 5932-24) required for Ford Super Duty pick-up beds starting model year 2017.

Socket kit includes various sizes of Torx, To... 

• The OTC 5911A magnetically attaches to pre-loosened oil pan drain plugs so you can remove them without dropping and avoid getting burned with hot oil.
• The patented design provides universal application to hex heads.... 

Torx® profiles continue to pop up on vehicle assemblies and components. External Torx® PLUS is yet another specialty fastener to be found on today's vehicles and the 5931 - 8 Piece External Torx®Plus Socket Set is the solu... 

TheOTC 5942 includes sizes 4, 5, 6, 8 are 20mm in length and have 1/4"internal square drive with a 7/16" external hex drive, and also includes sizes 10, 12, 14 & 16 which are 25mm in length and have 3/8 " internal square drive and 5/... 

• Services 1994-newer Dodge 1/2 ton 4x4 pickups with Dana 44 front axle and Dana 60 axle with vacuum disconnect front axle
• Made in USA

... 

• 1997-1998
• Ford camshaft positioning tool for use with: 1992 - 1998 4.6L 2V V8 Crown Victoria, Grand Marquis; 1997 - 1998 4.6L & 5.4L V8, 6.8L V10 Econoline; 1997 - 1998 4.6L & 5.4L V8 F-Series Truck; 1997 - 1998 5.4L... 

Made Of The Finest Heat-Treated Steel

• Durability guaranteed
• Set Includes: 
  • 1/4" - T10,... 

This kit will save you time and money when doing Front End repairs!

Stop struggling with front end work. Using the wrong tools can s... 

• The versatile design allows this tool to be used as a Pitman arm remover for many small, domestic rear wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles

• Used to separate the ball joint from the spindle support arm
• Works on many domestic and import front wheel drive vehicles, and is adjustable up to 2" for different size ball joints

• Universal design fits many different types of pulleys having slots or holes, including camshaft pulleys and crankshaft pulleys.
• Wrench is adjustable from 1-1/4 inch to 5 inches; works with a 1/2 inch drive ratchet or... 

• Designed to remove aluminum arm from steel stud, which often galvanizes and locks arm and stud together.
• Investment cast design is strong, easier to use—saves time
• Live center end allows for more ... 

The OTC Brake Drum and Rotor Puller is designed for use with air tools to reduce fatigue and time. Used for tough pulls, a single person can easily operate the tool. The Brake Drum and Rotor Puller can even be used in areas where there i... 

Removing a broken stud can be a tricky, time consuming undertaking. Pro's know boring a well centered hole is key to using extractors effectively. OTC now offers a solution to assist you with drilling a perfectly centered hole! The 6982D... 

• For use on most Ameri... 

• Forged from chrome alloy steel & heat treated to resist bending & breaking
• 24" long
• 3/4" diameter
• Made in USA

• 1984-1992 Ford Ranger & Bronco II with  manual hubs
• 1986-1995 Ford F-series 1/2 ton truck and full size Bronco with Dana 44 front axle 
• 1990-1993 Dodge trucks with Dana 44 automatic hubs
... 

... 

Helps remove and install water pump pulleys faster and easier on specific Ford, Lincoln and Mercury 3.0L DOHC engines. The puller works on the below vehicles with a Ford 3.0 DOHC engine:

• 
  Ford Escape 2001–20... 

Accomplish constant velocity (CV) joint work on many Ford cars easily with the OTC Inner CV Joint Puller Tool. This tool enables pulling CV joints on 1986-current Taurus/Sable models and pulls other joints with hidden retaining rings as ... 

• Services 1988-1995 Isuzu Trooper, Rodeo, Amigo and pickup; 1989-1995 Honda Passport; Jeep J20 pickups with Dana 60 axle.
• 1/2" square drive
• Made in USA

... 

Multi-Purpose Applications such as Steering Wheels, Flywheels, Harmonic Balancers, Pulleys and Gears with Tapped Holes

• I... 

• Large C-frame opening to accommodate beefier torsion bars
• Holds the ... 

This one man brake bleeding system allows for fast and efficient vacuum brake bleeding. The Vacuum Brake Bleeder has a universal rubber fitting that holds securely on brake bleeder screw.  Attach shop air and use the quick release t... 

The premium quality OTC 10-ton Hydraulic Ram for Collision Repair Sets - 9110A is designed to provide years of trouble-free operation. This collision repair set comes with a 6-inch stroke and a special piston rod that enables use with th... 

Removes and installs press-fit parts.

• Can be used with OTC 1124 and 1130 bearing pulling attachments, or OTC 679 and 680 pulley pulling attachments.
• May also be us... 

• 3/8" Complete Quick Coupler
• Rubber dust cap included
• 3/8" NPTF
• Designed for high pressure applications.
• Allows disconnecting of hose without loss of oil

• Ram half coupler and dust cap
• Precision built and designed for high pressure. Permits disconnecting hose without loss of oil
• 3/8" NPTF
• Made in USA

... 

• UltraTraceUV dye solution is the only solution approved by GM, Ford, and Chrysler
• It will not harm the activated charcoal canister, ORVR valve, purge valve, vent valve, catalytic converters, O2 sensors, seals, or gas... 

A high-lift transmission jack with universal saddle and adjustable corner brackets and safety chains for optimum positioning of the load. The head tilts front to back and side to side to make removal and installation of transmi...