If you are looking for a versatile adhesive for your body shop or garage, try the Lord Fusor Plastic Panel Repair Adhesive (Heat Set). It can be used to repair body panels, hoods, decks, and doors..

This special adhesive can be us... 

The Lord Fusor Metal Bonding Adhesive (Slow) is perfect for a variety of applications ... 

Can be used for roof channels, door seams, drip rails, trunk seams and truck bed floor seams. Fast curing and sandable to a feather-edge.

• No tooling needed
... 

Applications

• Drip rails, trunks, core support to apro... 

• For installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets and other body panels
• Substrates: SMC, fiberglass, carbon fib... 

• For use with 10.1/7.6 oz (300/225 mL) cartridges
• Dispenses 1:1 and 2:1 cartridges with easy conversion
• Features tempered, built-in nozzle cutter for easy controlled
• custom bead sizing
... 

Applications

• Sound deadening, sealing and filling of: d... 

Installation and bonding of body panels are made easier when using the Lord Fusor Plastic Bonding Adhesive (Medium). This adhesive works on binding substrates such as SMC, fiberglass, carbon fiber and other plastics to itself and primed ... 

No Metal Primer Needed

• Bonds directly to bare metal
• Cures 20 times faster than other brushable sealers
• No metal primer needed... 

When you are looking for factory appearance on seams, look for the Fusor Non-Sag Seam Sealer (Medium) for a clean job. The non-sag seam sealer works well on floor pan seams, truck bed seams, tooled door skins, core support seams, as well... 

Repair or bond composite panels such as large assembly bonding of body panels, fairings, ground effects, spoilers, roofs, wind deflectors, and fender lines with the Lord Fusor SMC Repair Adhesive (Slow). It shows efficacy on substrates s... 

LORD Fusor® 132/133 repair adhesive can be used on bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.

Features and Benefits

• Sand and paint in 1... 

Create strong bonds on plastic body panels, ground effects and spoilers with the Lord Fusor Plastic Bonding Adhesive (Slow) - 127EZ. This slow bonding adhesive works on binding several substrates - Metton, carbon fiber, SMC, fiberglass, ... 

Looking for a product that can effectively patch dissimilar metals on vehicle panels? Y... 

Lord Fusor Crash Durable Structural Adhesive is a metal bonding adhesive that is good enough to replace all OEM single-component crash durable adhesives. It helps in restoring vehicles to the original condition before an accident. Use it... 

Save when you buy 12 or more!

• .21" x 4.5" x 24-element (5.3mm x 114.33mm x 24-element)
• For use will all 1:1 and 2:1, 1.7 oz (50 mL) cartrid... 

Versatile metal and plastic panel bonding adhesive offers no odor or tack.

Applications

• Installation of large aluminum, steel and SMC/FRP body panels. This includes quarter panels, floor pans. rear ... 

• Bonds scuff liners to composite, wood or primed surfaces as well as composite body panels to primed metal surfaces
• For installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflec... 

Ensure a strong bond when you repair vehicle panels, side panels, door skins, an... 

• Duplicates factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where fast work time is desired.
... 

Applications

• Duplicates factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where fa... 

Applications

• Sound deadening, vibration dampening, reinfo... 

The Lord Fusor Plastic Bonding Repair Adhesive (Super Fast) is a super strong bonding adhesive that can be used on all plastics, primed and painted metals, glass, wood and other surfaces. This clear, non-yellowing structural adhesive has... 

Did you reverse your car in a hurry without checking the blind spot? Okay, you cringed when... 

The Lord Fusor Extreme Bumper Repair Adhesive (Medium) repairs bumpers and door trims. T... 

The Lord Fusor Manual 50 mL Dispensing Gun is suitable for use with Lord Fusor 50ml or 1.07 oz. cartridges. It manually dispenses 1:1 and 2:1 cartridges without the need for conversion. Boasting a sturdy construction, this high-quality g... 

This Sprayable Seam Sealer and Coating Dispensing Gun is a superior product that is easy to use and employs Lord's proprietary technology. It works well with Fusor HD sealers 802, 804, 805, and 806. When you use this spray gun with Lord ... 

• 0.34" x 5.8" x 24-element (8.6mm x 147.3mm x 24-element)
• For use with all 1:1 and 2:1, 300 mL (10.1 oz) and 225mL (7.6 oz) cartridges
• Available individually or by the case for your convenience.
... 

Applications

• Increases adhesion to all plastic bumpers.
• Improves adhesion of paints to plastic surfaces.

Substrates

• All plastic bumper covers.
... 

The Lord Fusor Bumper Reinforcing Mesh is best used for backing patches, bumper tabs and other reinforcements on plastic bumper covers. This product is designed for use with Fusor 142, 152, and 141. The bumper reinforcing mesh features a... 

• Removes silicones and contaminants
• Use prior to applying adhesives, sealers and coatings
• Removes brake dust from wheels
• 32 ounce bottle

This item can ... 

Applications: For use with 10.1/7.6 oz (210 mL) cartridges.

• Dispenses 1:1 and 2:1 cartridges
• Sturdy, high quality, compact
• 26:1 thrus... 

• Can be used with all 1:1 and 2:1, 7.1oz/210ml cartridges
• 0.34" x 5.8" x 24 element
• Integral threads for easy installation
• Pack of 12