Designed for use on harmonic balancers, crankshaft pulleys, steering wheels and gear pulleys

• Can be used on tapped flywheels o... 

The Crankshaft and Camshaft Seal Tool Kit is a compact puller that helps in installing and removing all passenger car, light truck, SUV crankshaft and camshaft seals without damage. The puller comes with extracting hooks that engage seal... 

Features:

• Install & Remove all passenger car, light truck and SUV crankshaft & camshaft seals without damage
• Easily remove and install camshaft and crankshaft seals
• Compact... 

Sharp, small diameter probes slide along wire into the connector to back probe circuit. Bent at 90 degrees with longer, more durable pins than the original 490 kit. No need to disconnect the connector or terminal.

Features:

• Made of flexible, heat-resistant plastic to reach into recessed areas or over, under and around hot manifolds
• Shaft is stepped to grip insulator
• Non-slip, black grip surfa... 

• Update Schley #64900, 64900A & 13350 Harmonic Damper Puller Kits 
  
• Jaw Kit fits Dodge / Chrysler 2009 to current 5.7 L V8 & 1995 to 2009 3.5L V6 engines 
  
• Jaws are thiner and w... 

• Fits over base frame of Sunex 8300GA geared engine stand
• Easily removed so that it can be emptied
• Ideal when working on engines to keep oil and grease off the shop floor
• Made of ABS plastic... 

• Expands quickly to cylinder size with fast action rack pinion
• Bottom... 

• Quickly removes and installs valve keepers on most overhead valve engines with valve stems from 4.5 to 7.5mm and 5/16" to 3/8"
• Makes valve component disassembly and reassembly fast and easy
• Can be used on the car ... 

• Quickly removes valve keepers on overhead valve engines
• Makes valve component disassembly and reassembly fast and easy
• Push or tap tool with a hammer to remove valve keepers
• A magnet in the tool body capt... 

• Rollers assure easy turning in cylinder
• Exclusive stabilizer spring allows operator to take selective cut to minimize chatter
• Spring-loaded carbide cutter follows contour of cylinder
• Complete ridge remove... 

• Designed to ease the operation of pulling the balancer pulley
• It reduces damage to both the pulley and the shaft
• Includes: (3) M8x1.25x80 bolts, (3) 3/8-16x3" bolts, (3) 5/16"-18x3" bolts, (3) M10x1.5x75 bolts, (3... 

A simple yet effective tool for disengaging spark plug boots

• Tool performs well in difficult areas such as recessed and obstructed plugs
• Square shaft pervents sl... 

• 10mm Spark Plug Adapters for 20250 Compression Tester
• The 20530 are a 10mm thread adapter

For Diesel EGR System Cleaning on the intake and exhaust sides of the EGR valve and cooler.\

• Designed for on-vehicle cleaning of the EGR circuit.
• Cleans variable geometry turbo chargers (VGTs) ... 

• Designed for on-vehicle cleaning of the EGR circuit
• Our EGR adapters are field tested and designed to deliver the most effective service
• Using our Part#400-0280 and special foaming process the service giv... 

• Easily checks condition of antifreeze and coolant
• Works for all ethylene glycol coolants, including GM Dex-Cool™
• Easy to use
• Tough & durable, shatter-resistant see-thru housing

The OTC 1725 Three-Point Engine Support Bar has a cutting edge (patent pending) design that ensures the load is self-centered, to prevent tipping on inclined surfaces. It has smooth sliding legs that adjust easily to a variety of vehicle... 

For Cummins engines: 

• All NH, NTC, NTE, N14 855 series in-line 6 cyl
• 378 series V6; 504, 555
• 903 series V8; KT 1150 series in-line 6 cyl., L10.&nb... 

• A bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage... 

• Designed to remove and install frost plugs used in liquid-cooled gas and diesel engines found in automobiles, trucks, SUVs, agricultural equipment, and construction equipment
• Simply use a hammer with the driver and a...