The vinyl 3M Stikit 8" Air Disc Pad offers superior adhesion of discs and is designed specifically for use with 3M Stikit Discs. Even though the adhesion is strong, the Disc Pad is easily removed, which in turn will help the work run smo... 

• For use with 8 inch diameter Stikit discs to shape plastic filler.
• Attaches with 5 mounting holes.
• Fits National Detroit 900 and Dynabrade Model 57700.
• 15º tapered edge

Speci... 

• For use with 8 inch diameter Hookit discs to shape plastic filler.
• Attaches with 5 mounting holes.
• Fits National Detroit 900 and Dynabrade Model 57700.
• Max 1,500 RPM.

• Edges are contoured to allow for sanding curves and close to moldings.
• Fits all standard (5/8 in shaft) slow-speed polishers with a max operating speed of 3,000 RPM.
• 8" diameter disc.
... 

The 3M Hookit 5" Disc Backing Pad is designed to firmly hold a sanding or finishing disc, or buffing pad to enable use with a random, rotary or orbital sander. It has a hook and loop feature that makes it quick and simple to attach, remo... 

• Provides support on dual action sanders for 3M Stikit discs
• Soft foam construction for conformability and improved surface finish
• Use with grade 220 and finer abrasive discs
• Max 10,000 RPM... 

• Dust extraction 3" Hookit back up pad constructed on foam material
• Backup pad has a 5/16-24 internal thread
• 15,000 RPM max
• Med... 

Use the 3M Hookit Soft Disc Pad, 8 inch , 05768 with a slow speed polisher/grinder. Ideal for use with fine grade abrasives for sanding primer on conformable surfaces. MOS: 3000 RPM.

• Specially made for use with 3M Stikit Discs
• Vinyl pad face provides good disc adhesion yet allows easy disc removal
• Pad is lightweight, shock-resistant and well-balanced
• Made with a tough, ... 

• Low profile design
• Very good edge support
• Dual action & random orbital
• 6" pad size
• PSA pad

• Backup pads designed for supporting 5 inch diameter x 7/8 center hole Fibre Discs on pistol grip sanders
• Uses retainer nut supplied with the sander

• A thinner low profile pad provides better support for block sanding
• Max 12,000 RPM

• For use with 8 inch diameter Hookit™ discs to shape plastic filler
• Attaches with 6 mounting holes
• Fits Chicago Pneumatic 777 sander
• Max 1,500 RPM

An 8 inch pad to be used with Hookit abrasives for multiple sanding applications

• Hard rubber backup pad
• Supports 3M Roloc 2 inch diameter abrasive discs
• 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts
• Assembly also ... 

• For 2 inch discs
• Shank: 1/4"
... 

• Use with slow speed polisher or grinder
• Ideal for use with fine grade abrasives for sanding primer on conformable surfaces
• Designed with a tough and durable foam body which helps to provide long pad life... 

• Back-up pad that provides support for 3 inch Scotch-Brite Gasket Removal Discs
• Pad assembly comes with 2 inch steel shaft and adaptor

• Flexible phenolic plates in sizes 3", 4" and 5" sizes

• Large phenolic plate set for backing larger sanding and grinding discs 3", 5" and 7"

• Specially made for use with 3M Stikit Discs
• Vinyl pad face provides good disc adhesion yet allows easy disc removal
• Pad is lightweight, shock-resistant and well-balanced
• Made with a tough, ... 

• Ideal for hand sanding applications including primer sanding, blend preparation and paint fin... 

Sand automobile surfaces easily with the 3M Hookit 6" Disc Pad. The tapered edge makes sanding on contoured surfaces effortless, whether at high or low speeds. The foam body is tough and long lasting. A medium density foam construction o... 

• 6" Med. tapered edge back-up pad for paper and film discs
• 1 pad

WARNING: Cancer and Reproductive Harm - ... 

• Top quality molded polymer construction
• 6" hook and loop pad has 5/16"-24 mounting thread
• Hook face for use with Mirka Grip backed discs

• Interfaced pad is used as a buffer for fine finish sanding
• Interfaced pad has a hook face to attach sanding disc to

• Vinyl faced pad for PSA backed discs
• The specially treated vinyl pad face offers excellent adhesion and ease of removal without paper delamination or tearing
• 6" PSA backup pad
• 5/16" x 24 mal... 

• Vinyl faced pad for PSA backed discs
• The specially treated vinyl pad face offers excellent adhesion and ease of removal without paper delamination or tearing
• 8" backup pad
• 5/8 in x 11 female... 

• Vinyl Faced backup pad
• 5" Diameter x 24 Spindle
• Medium Density
• Use with PSA abrasives

• 2" Disc Holder
• Use to mount Auto Body Toolmart Grinding & Conditioning Discs
• 1/4" Mandrel

• 3" Disc Holder
• Use to mount Auto Body Toolmart Grinding & Conditioning Discs

Features:

• Exclusive single-piece hub design reduces pad vibration and ensures smooth performance.
• Custom built and precision engineered for optimum performance
• Perfectly balanced ... 

Features:

• Exclusive single-piece hub design reduces pad vibration and ensures smooth performance.
• Custom built and precision engineered for optimum performance
• Perfectly balanced and ... 

3M™ Hookit™ Clean Sanding Low Profile Finishing Disc Pad is constructed of soft density foam with a 10 degree blunt tapered edge and is recommended for finishing applications on flat or contoured surfaces where dust evacuatio... 

3M™ Hookit™ Clean Sanding Low Profile Finishing Disc Pad is constructed of soft density foam with a 10 degree blunt tapered edge and is recommended for finishing applications on flat or contoured surfaces where dust evacuatio...