The Astro 8 Piece Professional Brake Tool Set is designed for use on most domestic and foreign trucks and smaller vehicles. It is useful for working on vehicle brake systems. This professional grade brake tool set includes a brake spring... 

• Complete set of adaptors for a wide range of vehicle applications
• Designed for push back and wind back brake pistons
• Provides both left-handed and right-handed thrust bolt assemblies
• Left-handed thrust bolt ... 

Complete set of adapters for a wide range of vehicle applications with left-handed and right-handed thrust bolt assemblies

• Des... 

Astro Pneumatic Brake Caliper Spreader Press - 78610

• Suitable for 1, 2 and 4 piston calipers
• 148mm(L) x 60mm(W) for 4 piston brake clippers
• Gearless design - does not require ratcheting
• Fea... 

• Unique design locks the adapters, cone and tube in a perfect line with less risk of breaking adapters.
• The clamp and set screws put pressure directly over the tube reducing the chance of the tube slipping from the cl... 

• Includes cutting, bending and flaring tools designed for use on steel brake, transmission & fuel lines and copper, aluminum & brass tubing
• Makes SAE 45° double & single flares in 3/16", 1/4", 5/16", 3... 

For servicing most foreign and domestic brakes.

Set Contains:

• 5/16" , 3/4" diameter, Brake Spring Tool
• 9-3/4" Brake Spring Tool
... 

Large Capacity Reservoir Eliminates Frequent Refilling

TheBranick G-300 Pressure Brake Bleeder is another OEM-recommendedproduct from Branick. It's a di... 

• Use to seal metal lines once disconnected
• Prevents fluid leaks and contamination during service
• For use on fuel, brake, A/C, banjo, power steering and transmission lines
• Use with all automo... 

Everything you need to loosen and replace frozen brake bleeder screws in this easy-to-use 45 pc. tool kit.

• Pays for itself in as little as one brake job
• Works with both aluminum and cast iron... 

• Fits both large and small washers
• Troublesome brake shoe retaining spring washers can now be easily removed and then reinstalled
• Wide window allows better visibility to align the nail and washer slot

• For 1 1/2" to 3 1/8" Disc Brake Cylinders (38.1 to 79.3mm)
• Special abrasive pads polish the cylinder without cutting
• Controlled pressure, three abrasives, and flexible driver provide good stability and sp... 

Compresses Brake Pistons In Seconds

• Squeeze the handle and the fast acting plunger compresses disc brake pistons in seconds. Makes brake pad replacement an easy job.... 

• Replacement 1" Stones Set for Disc Brake Hone 10400

Works for Single and Double Flares, Also ISO (Bubble) Flares

• This set includes all the adapters and tools necessary for single and double flaring (standard and metric) pl... 

• 240 grit square end
• Replacement stones for Lisle 10000 Brake Cylinder Hone
• 3 Stones only

• A Quick Way to Spread Brake Pads and Compress Disc Brake Pistons for Pad Replacement on Single, Double & Quad Piston Calipers
• Simultaneously compress all four pistons on quad piston applications
• Can be used while ... 

Compress dual brake pistons simultaneously with the Lisle Dual Piston Brake Caliper Compressor. This tool makes pad replacement job simple. Just squeeze the handle of the tool until the plunger comes in contact with the inboard brake pad... 

All you need for one person brake bleeding!

• Selectline hand vacuum/pressure pump
• 4.5 pz fluid reservoir bottle with fluid transfer and storage lids
... 

Designed with a face seal that's secured with double chains, this bleed adapter is designed to facilitate a seamless bleed that's secure and controlled. It's ideal for varying universal applications and offers a unique, adjustable clampi... 

• Specially designed to fit snuggly onto a wide range of brake and hydraulic clutch bleed screws
• Forms an airtight seal, and maintains a firm grip on the screw nipple

Includes:

... 

• For MV6830 Brake Bleeder

• Extends the reach of Mityvac fluid evacuators models MV7400, MV7300, and MV7201 by up to 6' (1.8 m)
• Kit contains a main evacuation tube, two smaller diameter tubes for extending into dipstick tubes, and tube connecto... 

• Malleable iron frame
• Steel screw, swivel and sliding cross pin handle
• 8" opening, 4" depth, 3/4" diameter
• Weight: 4.3 lbs.

... 

The OTC Brake Anchor Pin And Bushing Service Set is a special set of tools that includes everything you need for removal and replacement. With this set, there is no need to remove the bearing hub assembly just to replace the pins and bus... 

The OTC Brake Drum and Rotor Puller is designed for use with air tools to reduce fatigue and time. Used for tough pulls, a single person can easily operate the tool. The Brake Drum and Rotor Puller can even be used in areas where there i... 

• S cam replacement top for OTC 7069A
• Made in USA

Savetime removing air from brake system by doing all the wheels at the same time;also eliminates the need for an assistant. Hoses easily attach to bleederscrews, which hold hoses in place and prevent leaking. Check valve on end ofhoses p... 

• Makes it easier to install bearing races and seals without damage to race, axle housing or brake rotors
• Machined aluminum construction

Includes driver handle and , 9, adapter sizes: