• 4.2 CFM air operated vacuum pump
• R134a U-Charge kit
• 270 pc. HNBR R12 and R134a O-ring assortment
• 1" pocket thermometer
• R134a Economy brass manifold gauge set
• R134a side... 

Set Includes

• R12/R134a hoses
• (3) 60" hoses
• Manual couplers
• 1/4" SAE M x 1/2" ACME F adapter
• Gauge guards

... 

Quickly remove old refrigerant oil and debris before compressor replacement or retrofitting system

• Designed to work with any ... 

• Converts R12 gauges to R134a
• Contains R134a 90° quick couplers and adapter for R134a refrigerant tank

WARNING: This pr... 

• Hoses with auto A/C fittings
• (1) each: red, blue, yellow hoses (yellow with auto shut-off valve)
• SAE J2196 Nylon barrier hose
  • 800 psi working pressure
  • 4,000 psi burst... 

• Hoses with auto A/C fittings
• (1) each: red, blue, yellow hoses (yellow with auto shut-off valve)
• SAE J2196 Nylon barrier hose:
  • 800 psi working pressure
  • 4,000 psi burs... 

• Valve core remover and installer
• (2) High side R134a cap
• (2) Low side R134a cap
• (3) 1/4" flare cap with tether
• (3) GM large bore valve core R12/R1... 

• Highest quality long lasting charging hoses rated at 800 PSI working pressure and 4000 PSI burst pressure.

• R134a hoses with 1/2" ACME-F and 14mm-M auto A/C fittings

... 

• Highest quality long lasting charging hoses rated at 800 PSI working pressure and 4000 PSI burst pressure.
• R134a hoses with 1/2" ACME-F and 14mm-M auto A/C fittings

... 

• Water Capacity: 47.7lb / 21.7kg 
• DOT Specification: DOT04BA-400
• Service Pressure: 400PSIG
• Fittings: 1/2" ACME male

• Water Capacity: 47.7lb / 21.7kg 
• DOT Specification: DOT04BA-400
• Service Pressure: 400PSIG
... 

• Includes Proprietary "Clip-On" chassis for attachment to electronic leak detectors, video borescopes and extension type devices that measure ¼" to 3/8" in diameter.
• Software managed sensor rejuvenation mode in... 

The NITROKIT is engineered to effectively pressure test a system after initial installation or service work to ensure the absence of leaks prior to the introduction of refrigerant.

The kit includes:

... 

The NITROKITG is engineered to effectively pressure test a system after initial installation or service work to ensure the absence of leaks prior to the introduction of refrigerant. 

Kit Includes:

... 

The VP10D Pro-Set® vacuum pump is a powerful 2 stage unit with a versatile dual voltage motor. The unit boasts the same high quality, high value features engineered into all of our Pro-Set® Premium Series vacuum pumps providing p... 

• The VP2D Pro-Set® Premium Series vacuum pump is a 2 CFM single stage unit with a versatile dual voltage 1/3 HP motor 
• Dual voltage operation 110-120V/220V 50/60Hz 
• Exceptional ultimate vacu... 

The VP6D Pro-Set® Premium Series vacuum pump is a 6 CFM, 2 stage unit with a versatile dual voltage 1 / 2 HP motor. The unit boasts the same high quality , high value features engineered into all of our Pro-Set® vacuum pumps prov... 

• Spotgun Jr.™ replacement dye cartridges are easy-to-use without mess or spills 
• 6 dye cartridges - 6 applications 
• SAE-J2297 certified & OEM approved dye 
... 

• Allows the technician to select the correct oil. 
• No mess; No waste.
• Easy application to pressurized systems.
• 8 oz. (240 mL) cartridge

... 

Today's vehicles require precise amounts of oil. Spotgun oil cartridges utilize the Spotgun injection system to inject a precise measured amount of A/C Oil while eliminating moisture contamination in the oil.

Size:... 

Universal cone adapter for vacufill coolant exchanger

For Airlift and Vacufill™

UView Airlift II Vacuum Gauge - 98037025

The Robinair Premier R-134A Refrigerant Recovery, Recycling and Recharging Machine delivers an impressive—and industry-leading—98.5 percent recovery efficiency on both standard and hybrid motor vehicles, along with a fully au... 

Robinair brings you this 34288NI recycler that combines simple operation with superior accuracy. It recovers, recycles, evacuates and recharges R-134A mobile A/C systems quickly and accurately. The product outperforms the most current SA... 

• 115 volt, 2-stage design
• 1/2" ACME and 1/4" MFL intake fitting
• Finned surfaces dissipate heat ... 

• 30 lb. tank for R-134a (34234, 34300-2K, 34800, 34134A, 34134-2K series)

• Adapts to R-12, R-134a and their respective oil cans
• 1/4" flare 1/2" ACME port... 

• Con... 

Robinair Recycling Filter-Driers will help in removing contaminants like acids and moisture from a refrigeration system. Contaminants can impair the proper functioning of a system, and it is essential to have good quality filters like th... 

The Robinair Oil Injector, R1234YF, Poe Labeled helps with adding A/C system oil to a fully pressurized A/C system. It works well with any R1234yf Evacuation and Recovery Machine.

The Robinair Oil Injector, R1234YF, Poe Labeled i... 

• Protect your Robinair AC1234-6 when it's not in use with this dust cover.
• Dimensions: 15.75in x 5.00in x 15.00in

The Robinair R1234YF Oil Injector Generic is a syringe-type injector that helps in adding oil to a fully pressurized A/C system. Just fill the barrel with the amount of oil required, connect the injector, and press the plunger. The syrin... 

• The Robinair 25700 is a contaminated recovery only device that is designed to remove contaminated refrigerant from vehicles that are equipped with R-1234yf and R-134a A/C systems.

Services High Voltage Electric Compressor A/C Systems

Robinair 34788NI-H machine performs recover, recycle, evacuate, leak-test and recharge R-134a with improved 98.5% effici... 

1/4" FFL x 1/2" ACME-M

• One Tool Does it all
• Fits R12 & R-134a & Oil Charge Cans

Specifications:

• SENSITIVITY:
  • Detects all refrigerant leaks as low as 1/10 oz. per year
  • "Super Sensitive Function" allows the unit further sensitizing beyond the standard ... 

• Excellent method for adding refrigerant oil or large amounts of UV leak detection dye to the A/C system
• Add oil by allowing vacuum to pull it in after the evacuation process, or use refrigerant to push it in using th... 

• Included in Mastercool 71475 Universal Hydraulic Flaring Tool Set

• Included in Mastercool 71475 Universal Hydraulic Flaring Tool Set

The AC1234-4 is a fully automatic ACS machine that meets or exceeds SAE J2927 and J2843 standards for 1234yf recovery. The machine includes an integrated refrigerant identifier that samples the refrigerant in the vehicle’...