For fast and easy drying of waterborne paints.  Similar to the Karajen Blower Hanger™, this slightly smaller and lighter weight Jet Hanger™ is modified for the lightweight plastic jets.

• Magne... 

Simplify your test panel/spray-out card process.  Easily attach paper or metal test panels, then aim and spray!  Save time and materials by eliminating the repetitive task of taping a test panel to a stir stick.  In betwee... 

Hang your towel box on any metal surface, while still in its original cardboard packaging or dispensing box.

This innovative 2-piece Magnetic BoxHanger™ pierces into the sides of the box and attaches magnet... 

Hang your boxes of rubber gloves close by and at convenient locations throughout your shop or warehouse.

• Fits most common sizes of rubber glove boxes
• Powerful magnetic mounting or... 

Keep your spray cans organized and arranged where you need them – when you need them.

• 9 can positions
• 3 extra wide positions for wider can bodies
• Built with soli... 

Sprayable & Easy to Apply

• Spray a coating of Dust Control Spray before vehicle enters the paint booth
• Water-based formula designed to a... 

Upright metal dispenser equipped with foam roller to apply 3M Dirt TrapProtection Material to floor areas. Applies material quickly andwrinkle free to brighten work areas while trapping airborne dust anddirt resulting in a cleaner repai... 

• 9 Foot Chimney Kit w/ARV
• 3' Plain Duct, 3' w/ Clean Out Duct, roof flashing, rain collar, connection ring and automatic roof ventilator

• Motor Starter for paint booths

This is a special order item. You must call and give specifications on your electrical requirements - 800-382-1200.

Ships by truck freight. ... 

Premium Electrical Kit for RTT Cross Flow (Front Flow), Reverse Flow, Modified Down Draft (Semi Downdraft) & Value Tilt Cross Flow Booths

• Motor Starter
• Solenoid Air Valve
• UL/CUL Listed Control Pane... 

• Basic Electrical Kit - motor starter, solenoid air valve, UL/CUL listed Control Panel

Ships by truck freight.

RTT White Powder Coating Spray Booth Upgrade Option

• White "porcelain like" finish can increase booth lighting and visibility by up to 50% meaning less painting errors and costly re-dos.
• Powder coated booth... 

Premium Electrical Kit 8597 for RTT Side-Down Draft Paint Spray Booth 8552

• Interlock door switches
• 2 mag starters
• Solenoid air valve
... 

Basic Electrical Kit 8712-2 for Side-Down Draft Paint Spray Booth 8552

• 2 Motor Starters
• Solenoid Air ... 

• ETL Listed Upgrade for Paint Booth Control Panel

• 9 Foot Chimney Kit w/ARV
• 3' Plan Duct, 3' w/ Clean Out Duct, roof flashing, rain collar, connection ring and automatic roof ventilator
• Ships directly from manufacturer, you will be contacted with shippin... 

• 3 Foot Duct Section For Use With Chimney Kit

Ships by truck freight. You will be contacted with shipping charges before order is processed.

• Variable speed, direct drive, 1/3hp, 1725rpm, 4375 cfm
• 20" spark resistant polypropylene blade w/rugged cast aluminum hub
• Sturdy, all welded construction frame
• 24" x 24" x 13"
... 

The Jenny 24" Explosion Proof Fan With Variable Speed comes enclosed in a sturdy, all-welded construction frame. It has a belt drive, 1/3 hp, 1100 rpm and 4900 cfm, and a rugged safety back guard. Its motor is UL Listed for Class 1, Grou... 

Improve ventilation in your auto body shop with the 24" Explosion Proof Fan. This fan has a powder-coated finish that is resistant to corrosion. This single speed fan is fully enclosed and features an explosion-proof motor. It has a belt... 

• 16" Shutter
• Automatic Shutter
• Extruded aluminum frame.
• Formed aluminum blades with felt backing.
• Low maintenance cost, no painting required.

• Specially engineered surface protection material protects collision repair shop walls and floors
• Nonwoven construction traps airborne contaminants, helping to control dust and overspray
• Low-tack adhesive bac... 

Product Application

A three stage, baffle-type, styrofoam arrestor. Its uniquedesign creates less static pressure than the other leadingstyrofoam arrestors on the market, with an averageefficiency that is greater. The Styrobaffle... 

Product Application:

Use in crossdraft applications where the user requires a good basic filter and cost is a major consideration.

Product Specifications:

• 1.5" green, 2-ply, self-sealing, tackified pol... 

Use in crossdraft applications where the user requires a good basic filter and cost is a major consideration.

• 1.5" green, 2-ply, self-sealing, tackified polyester media... 

• Rolls are reverse wound for easy application
• Flame-resistant
• Kraft paper rolls are used as a floor covering
• 300ft rolls
• Available in 4 ... 

• 2" blue,... 

Product Application

Use in downdraft applications where a high efficiency diffusionmedia is required. Available to fit all downdraft booths, both imported & domestic.

Product Specifications

• 1" ... 

... 

• Single speed, direct drive, 1/3hp, 1725rpm, 4375 cfm
• 20" spark resistant polypropylene blade ... 

• Variable speed, direct drive, 115V/230V, 1/3hp, 1725rpm, 3100 cfm
• 16" spark resistant polypropylene blade w/rugged cast aluminum hub
• Sturdy, all welded construction frame
• 20" x 20" ... 

• 24" Shutter
• Automatic Shutter
• Extruded aluminum frame
• Formed... 

• 20" Shutter
• Automatic Shutter
• Extruded aluminum frame
• Formed aluminu... 

• Fully assembled, ready to operate
• Heavy gauge, corrosion resistant aluminum blade
• Sturdy, all welded construction, steel fame
• Corrosion resistant powder coated finish
• All mot... 

• Fully assembled, ready to operate
• Heavy gauge, corrosion resistant aluminum blade
• Sturdy, all welded construction, steel fame
• Corrosion resistant powder coated finish
• All moto... 

• Includes shutter
• Single speed, direct drive, 115V/230V, 1/3hp, 1725rpm, 3100 cfm
• 16" spark resistant polypropylene blade w/rugged cast aluminum hub
• Sturdy, all welded construction frame

The 8-Position Spray Gun Shelf can accommodate up to eight spray hand guns, with or without cups. The slots are sized for various cup adapters related to disposable cup systems. Standard guns using traditional metal or plastic cups can a... 

The 8-Position Spray Gun Shelf can accommodate up to eight spray hand guns, with or without cups. The slots are sized for various cup adapters related to disposable cup systems. Standard guns using traditional metal or plastic cups can a... 

Increase the efficiency and productivity of your spray booth when you install the Booth Box II. This magnetic double-compartment cabinet is designed specifically for the interiors of your spray booth and easily adds extra storage capacit... 

Combination spray gun holder and vented shelf

• 5 high power magnets for easy mobility
• Holds up to 3 guns including mini touch-up gun
... 

Leaving your expensive spray guns around your workshop unattended may prove expensive and dangerous. Hence, you must get the Magnetic Hose & Gun Hanger, which is the perfect tool to hang your expensive gravity feed spray guns when no... 

• Safely store and organize your tape, tack rags, razor blades, spray guns & touch up brushes
• Top of shelf is used as mixing shelf or paint holding area
• Two Mount Options: Mounts magnetically for easy... 

• Hangs up to 2 guns with or without cups
• High gloss powder coated finish
• 16 gauge steel construction
• Hanger sl... 

• 3 Foot Duct Section For Use With Chimney Kit
• 24" diameter

Col-Met Finishing Solutions is now RTT Engineered Solutions

Ships by truck freight. You will be contacted with final shipping charges.

• 3 Foot Duct Section For Use With Chimney Kit - 12" diameter

Ships by truck freight. You will be contacted with final shipping charges.

... 

• 3 Foot Duct Section For Use With Chimney Kit
• 18" diameter

Ships by truck freight. You will be contacted with shipping charges before order is processed.

• 9 Foot Chimney Kit w/ARV - 12" diameter
• 3' Plain Duct, 3' w/ Clean Out Duct, roof flashing, rain collar, connection ring and automatic roof ventilator

Ships by truck freigh... 

• 9 Foot Chimney Kit w/ARV - 18" diameter
• 3' Plain Duct, 3' w/ Clean Out Duct, roof flashing, rain collar, connection ring and automatic roof ventilator

Ships by truck freigh... 

Col-Met Finishing Solutions is now RTT Engineered Solutions

• Powder coating upgrade for the panels on the 8710 - Cross Flow "Bike Booth"

Col-Met Finishing Solutions is now RTT Engineered Solutions

• 10 foot extension for 8710 "Bike Booth" motorcycle paint booth

Ships by truck ... 

Drive thru upgrade option for the RTT Side-Down Draft Paint Spray Booth 8552!

This product ships by truck freight.&... 

Col-Met Finishing Solutions is now RTT Engineered Solutions

• Pre Fab Electrical Kit - For 8590-45 & 8590-35
• Interlock micro switches, mag starter, solenoid air va... 

• Magnetically attached unit
• Shelf capacity of 50 lbs.
• Spray gun and air hose hanger cut-outs support both gravity and siphon guns
• Cleaning brush and wrench bracket
• P... 

• Protects booth lights and windows
• The water based coating is applied with conventional equipment and levels a smooth transparent film that won't distort the booth's lighting or the clarity of it's windows
... 

Clear and white heavy-duty protective films are used to keep floors clean, and few do it as well as the RBL Products 48" x 200ft Spray Booth Floor Film, Clear - 421. This film is extremely easy to apply. Simply unwind the roll and lay it... 

Authorized Sata Distributors such as Auto Body Toolmart are not allowed to sell Sata products over the intern... 

Measure low positive, negative or differential gas/air pressures accurately in auto body shops with the Dwyer Mark II Molded Plastic Manometer. Paint booths usually need a manometer and this curved inclined-vertical type g... 

The Klean-Strip Mask and Peel Spray Booth Coating keeps your spray booth looking clean and professional. You can apply it easily, and it will protect booth surfaces from over spraying. This spray booth coating dries quickly to begin its ... 

• Provides duct work to properly exhaust cross flow model
• 20 gauge galvanized hammer seamed 'plain pipe' ducting
• One duct end corrugated for easy assembly
• (1 pc) fan connection r... 

• Vertical / Side Discharge configuration
  
• White Powder coat finish
  
• ETL Listed Control Panel
  
• Single point connection
  
• Exhaust VFD fused and wired
  ... 

• Vertical / Side Discharge configuration
  
• White Powder coat finish
  
• ETL Listed Control Panel
  
• Single point connection
  
• Exhaust VFD fused and wired
  ... 

• bright white powder coat door finish- (inside & outside)
• personnel door size 30"w x 84"h
• viewing window included
• heavy duty dual skin construction
• high quality hinges, p... 

30" SOLID, REAR BOOTH EXTENSION

• BRIGHT WHITE POWDER COAT PANEL FINISH- (INSIDE & OUTSIDE)
• HEAVY DUTY PRECISION PUNCHED 18 GAUGE PANELS
• CONVENIENT 5/16" BOLT & NUT ASSEMBLY
... 

30" LIGHTED, REAR BOOTH EXTENSION

• BRIGHT WHITE POWDER COAT PANEL FINISH- (INSIDE & OUTSIDE)
• HEAVY DUTY PRECISION PUNCHED 18 GAUGE PANELS
• CONVENIENT 5/16" BOLT & NUT ASSEMBLY
... 

PSB-SEMIDD26B- PLENUM KIT ASY iDEAL, Semi down draft - Plenum kit

• Required when using direct 'Gas Fired' air make up (heater) with paint booth
  
• Can be installed to new or existing iDEAL semi down dra... 

The California Pulse electric heater system is a combination of a waterborne paint drying system and an electric heater. The system has four user selectable modes: Pre-Heat, Flash-Off, Spray and Bake.

1. The system hea... 

The California Pulse electric heater system is a combination of a waterborne paint drying system and an electric heater. The system has four user selectable modes: Pre-Heat, Flash-Off, Spray and Bake.

1. The system hea... 

• Provides duct work to properly exhaust iDEAL Semi-Down Draft Paint Booth
  
• 20 Gauge galvanized hammer seamed 'plain pipe' ducting
  
• One duct end corrugated for easy assembly
  
... 

• LDPI led lighting upgrade kit for iDEAL Paint Mixing Room and Open Face
  Increases booth brightness
• Two row leos providing 5,000k cct
• UL/ETL listed 120-277vac (50/60hz) electrical
• Dir... 

Like90 Booth Coating is a water-based, spray-able booth coating that protects booth walls, lights, and other surfaces against paint overspray with just one coat.

• One application of Booth Coating (about 2 gallons for a ty... 

The Hose & GunHanger™ was designed to hang your air hose, spray guns, rolls of tape and other items in one location.

• Tapered platform to hang air hoses without distortion
• Elongated holes on hose... 

• Magnetically mounts securely to the wall using high-powered magnets - no installation, drilling or booth retrofitting.  Sets anywhere within the booth
• Aims precisely at targets with a variety of full movement:... 

Paint your mirrors and other individual parts with ease.

This 2-Part system is the answer for holding all sizes of mirrors for painting! Just attach the mirror to the holding handle, lift the handle from the bas... 

The Magnetic Blower Hanger™, by Karajen Corp., for Waterborne paint drying: Maximize floor space in the booth with the Magnetic Blower Hanger™.

Move anywhere on the booth wall, and easily aim your blowers at the targ... 

by Karajen Corp.
Store and organize miscellaneous items with the Magahook™.

• 2-1/2" round powerful magnetic base
• Great to use on toolboxes, spray booth walls, parts caddies and so much more ... 

Store and organize miscellaneous items with the Magahook™.

• 2-1/2" round powerful magnetic base
  
• 3" hook/shaft for items to hang from
  
• Great to use on toolboxes, spray booth... 

A wall shelf and spray gun holding rack combination that is vented to allow air to flow freely through and avoid pocketing of over-spray. 3 spray gun positions, holds standard gravity or mini touch up gun.

Includes a place to sto... 

Hang spray guns or other air tools safely and securely.

• Wall mounted with screws.
• Durable 16-gauge steel construction with high gloss powder coated finish
• Soft-edge guard on gun ... 

Corner mounted shelf and spray gun holding rack combination allows you to do final mixing and make gun change over on the shelf.

Also stores needed items while in the spray booth such as: razor blades, dirt pick tools, blow guns... 

Store and organize miscellaneous items with the Mini Magahook™

Great to use on toolboxes, spray booth walls, parts caddies and so much more

1.5" Diameter

This three-rail system allows you to paint your parts and slide them out of the way.

• Two powder coated 7' steel rails
• One powder coated 10 ½' cross beam
• Four mounting plates
&bul... 

Keep your air hoses off the paint booth floor and out of your painter's way, with The Hose
Glider. Hose glides easily on roller wheels, which prevents kinked and tangled hoses.

• White powder coated steel
... 

Adhesive-backed clear film protects lights and windows from overspray buildup. No more scraping and cleaning fragile surfaces, simply peel off the film and re-apply. Replace window film when heavily coated with overspray or within six mo... 

• Provides duct work to properly exhaust semi down model
• 20 gauge galvanized hammer seamed 'plain pipe' ducting
• (1 pc) 36"h x 25" dia. Solid 'center' duct
  
• For iDEAL ...