• Strong, professional and fast method for securing parts for controlled spray painting
• Achieve complete coverage on smaller parts such as mirror covers, handles, fender flares, fog light bezels and moldings
... 

Keeps the Surface Clean!

Static attracts dust and unwanted particles, making it very difficult to keep surfaces clean and causing blemishes in the paint's finish and other work ... 

• Allows you to paint all the angles
• Powerful magnets to attach to wall of booth or hang it up for drying

• Replacement bulb to be used with the 3M PPS Sun Gun II Color Matching Light Kit 16550
• It is not compatible with earlier versions of the 3M Sun Gun 16400

• The 3M PPS SUN GUN II Battery Pack Model, PN16555, is used with the 3M PPS Sun Gun II Color Matching Light Kit, PN16550
• It is not compatible with earlier versions of the 3M PPS SUN GUN, PN16400
• The 3M PPS... 

The 3M PPS Quad Wall Mount Gun & Cup Holder is the perfect hanger for your expensive gravity speed spray guns when you are not using them. Leaving your spray guns unattended in the garage may lead to accidents and damage. To put your... 

Identify pre-or-post paint defects and avoid costly color mismatch

The Infratech Color Matcher Light System works in a high color temperature 5300K that duplicates natural sunlight. This system provides the eff... 

For paint gun water separator

The EZ Dabber is an economical tool that you can use for applying paint and glue onto hard to reach vehicle parts. These dabber sticks are just what you need when your auto body parts require a dab of something to mend a fix. Apar... 

• Used for "shaving" away runs, sags and dust particles
• Uses a calibrated dial to obtain accuracy of .001 inch cuts
• How To Use:
  • Insert a fresh blade (change as often a... 

Engineered for the Refinishing Technician to Block Out Runs

The Magna Run Blockers are engineered for the refinishing technician to ... 

• Increased air flow efficiency conserves compressed air and increases pneumatic power to each line running off the air compressor. 
• The power flow coupler's air chamber is completely open, unblocked by springs, c... 

• Designed for body shops, dealerships, painters, appraisers, inspectors, detailers and professional car buyers.
• Pocket size with one-hand operation.
• Conclusively identify all previous refinish work.

• Abrasive refill cartridge for your PrepPen Adjustable Sanding Pen (8823)
• Contains 2 refill cartridges per pack

Are you tired of using a folded sandpaper for paint chips and other repair works? Then you must pick up the PrepPen Adjustable Sanding Pen to get... 

Disposable Touch-Up Microbrush

• Place or remove the smallest drops of paint, cleaners or lubricants with ProTouch's small non-linting, non-absorbing fibers
• Exact positioning even in the hardest to ... 

• Save fresh paint jobs by removing lint, dirt, insects or hair
• Ultra fine tip enables particles to be gently lifted from wet paint.
• Easily cleaned, non-corroding stainless steel instrument
... 

Get the accurate thickness of the non-ferrous coating on steel with the ProGauge II Magnetic Paint Thickness Gauge. This stat... 

Don't Throw Away Your Unused Paint! Store It in These Paint Cans.

• Great for storing unused paints
• Available in three sizes

Viscosity Metal Measuring Cup -47399

• Simply dip the cup into the paint to make measurement
• Measure the thickness of topcoats, undercoats and clears
• Handy gauge chart included
• Metal

DeFelsko PosiTector 200 B1 Standard Ultrasonic Coating Thickness Gage for Non-Metal Substrates

Non-destructively measures a wide variety of applications using proven ultrasound technology. Measure coating thickne... 

Coating Thickness Gage for ALL Metal Substrates

Measures both non-magnetic coatings on steel and non-conductive coatings on aluminum, brass, etc. Automatically recognizes the substrate and takes a measurement.

Coating Thickness Gage for ALL Metal Substrates

Rugged, fully electronic coating thickness gauge uses magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and qu... 

PosiTector Probes

PosiTector bodies accept all PosiTector probes easily converting from a coating thickness gage to a surface profile gage, dew point meter, soluble salt tester, hardness or ultrasonic thickness g... 

PosiTector Probes

PosiTector bodies accept all PosiTector probes easily converting from a coating thickness gage to a surface profile gage, dew point meter, soluble salt tester, hardness or ultrasonic thickness g... 

2-Sided Hang Tag with the front side providing a Thank You, a reminder for resetting pre-set items, and personalization with the company name.  The back side explains how to take care of fresh paint after the car is delivered, from ...