A pneumatic applicator gun designed for use with 3M's 200mL cartridges

• Pneumatic system is ideal for large volume dispensing
• Inlet at the handle accepts standard air fittings
• Pistol-grip handle

Fully enclosed, pneumatic applicator gun for use with 3M Windshield Urethanes, Urethane and MSP Seam Sealers in 310 mL or smaller flexible foil packages

The 3M Performance Manual Applicator Gun is designed for the 3M two-part cartridge range. It accurately mixes two pack adhesives to the perfect consistency without the need to measure. It dispenses 1:1 and 2:1 200 ml dual pack cartridges... 

• Fully enclosed, all metal, rod driven, friction feed applicator gun
• For use with 3M Windshield Urethanes, Urethane and MSP Seam Sealers in 310 mL or smaller flexible foil packages.
• 12:1 ratio

TWIST, MIX & FIX! It's that Easy!

Professional pneumatic (air-operated) applicator for cartridge-based Body RepairMater... 

Red nozzles for the 3M Dyanmic Mixing Gun

• Proprietary design that defines Dynamic Mixing with low waste
• Box of 50

Use these tips for the following 3M Products:

Large Diameter for Easy Dispensing

• Designed for use with 200 mL and 400 mL cartridges
• Larger diameter allows for easier dispensing
• 6 nozzles per bag

• 3M Static Mixing Nozzle is a cascade mix/meter nozzle for an easy squeeze of adhesive right on target
• Engineered for use with 3M 50mL cartridges.
• A high performance static mixing nozzle speciall... 

The 3M Manual 200 mL Cartridge Applicator Gun is designed for the 3M two-part cartridge range, and it enables mixing two pack adhesives to the correct consistency. This high-performance applicator gun does not require any measurement. It... 

The 3M Static Mixing Nozzle 50mL helps in efficiently mixing a host of 3M two-component adhesives, foams, and sealers. This high-performance mixing nozzle is designed specifically for 50 mL cartridges. This mix/meter nozzle helps in sque... 

• Designed for use with 3M No Cleanup Coatings, part numbers 08804, 08949 and 08964.
• 8 nozzles per bag.

• 3M Static Mixing Nozzle for use with all 3M 200mL and 400mL two-component cartridges
• Larger diameter allows for easier dispensing.
• This nozzle can be used with two-part products in either the 08117 ap... 

• 6 mixing tips 
• 24 element
• Ensures automatic mixing for 220 ml to 400ml

• Heavy duty manual gun to be used with either 200 ml or 220 ml SpeedGrip cartridges
• Manual applicator gun
• For use with Norton Speed-Grip Sealers and Adhesives

• 7/6in x 6.25in long
• 12 per bag

• Specially constructed for the application of Gravitex HS chipguard.
• Srews directly onto HS chipguard bottle.

... 

Utilized for the quick, precise, mess-free application of Valvoline PLIOGRIP plastic adhesive, this applicator gun is a simple solution to effective repairs. Simply load the applicator gun with 1:1 or 2:1 PLIOGRIP cartridges, identify yo... 

The RhinoPro Spray Gun is a dual cartridge spray gun that is pneumatically driven and is designed to dispense the 1:1 100% solids RhinoPro coatings held in disposable cartridges. It does not need electricity and is completely air-driven.... 

• Avoids air entrapment; improves static mixing reliability; minimizes waste and increases productivity.
• Heavy polypropylene copolymer adhesive dispenser cartridge wall for strength.
• Design provides excell... 

• For use with 10.1/7.6 oz (300/225 mL) cartridges
• Dispenses 1:1 and 2:1 cartridges with easy conversion
• Features tempered, built-in nozzle cutter for easy controlled
• custom bead sizing
... 

Save when you buy 12 or more!

• .21" x 4.5" x 24-element (5.3mm x 114.33mm x 24-element)
• For use will all 1:1 and 2:1, 1.7 oz (50 mL) cartrid... 

• 0.34" x 5.8" x 24-element (8.6mm x 147.3mm x 24-element)
• For use with all 1:1 and 2:1, 300 mL (10.1 oz) and 225mL (7.6 oz) cartridges
• Available individually or by the case for your convenience.
... 

This Sprayable Seam Sealer and Coating Dispensing Gun is a superior product that is easy to use and employs Lord's proprietary technology. It works well with Fusor HD sealers 802, 804, 805, and 806. When you use this spray gun with Lord ... 

The Lord Fusor Manual 50 mL Dispensing Gun is suitable for use with Lord Fusor 50ml or 1.07 oz. cartridges. It manually dispenses 1:1 and 2:1 cartridges without the need for conversion. Boasting a sturdy construction, this high-quality g... 

• Ensure proper mix ratios for DUAL-MIX products.
• 0202 come standard with all DUAL-MIX products except 39997
• Made in USA

This item can only ship by ground within t... 

Purchase (12) SEM Cartridges With This Gun and enter the code "SEM1" at checkout in the Coupon ... 

• Seam Sealer Nozzles are a convenient option when the technician does not want to use the nozzle that came with the cartridge
• Get a fresh nozzle every time
• Time saver - No need to scrape out dried mater... 

Make some space in your tool chest for the super convenient and economical 3M Schutz Applicator Gun, which will surely be an asset to your collection. This applicator has been specially designed to improve efficiency and provide a distin... 

• For use with all 210 ml (7.1oz) cartridges
• Dispenses 1:1 and 2:1 cartridges
• 26:1 thrust ratio allows for easy dispensing of high viscosity adhesive
• Easy cartridge insertion and ejection

• Can be used with all 1:1 and 2:1, 7.1oz/210ml cartridges
• 0.34" x 5.8" x 24 element
• Integral threads for easy installation
• Pack of 12