Restore and Prolong Air Tool Life - Cleaner, Conditioner and Lubricant

B'laster's Air Tool Conditioner is designed to restore and prolong air tool life by cleaning, coating and lubricating t... 

Wire Bristle Replacement Brushes for:

The Dynabrade Cut-N-Polish Head Kit converts the common rotary buffer with a standard spindle (5/8"-11) to random orbital buffer. It features a hook and loop system and is a 3,200 RPM rated accessory. Use this Dynabrade kit t... 

• Specifically designed for use on all straight air files and for use with 3M Stikit File Sheets (2-3/4" x 16-1/2").
• Features a tuck-in clip on the front edge for easy insertion and quick application o... 

The Steck Panel Shaper Kit is an air hammer driven set that consists of three self-lubricating nylon reinforced heads that allow technicians to reach deep areas and bring deformed parts back to their original shape. Each kit contains thr... 

• Developed to dramatically reduce time spent on the removal of Pinstripes, Adhesive and Double Faced Tape
• Fast and easy
• Molded rubber with 5/16"-24 thread arbor for use with the 533ET or 1208A
• Pad size: ... 

• Replacement pad for HTN-528
• Made in the USA

• Replacement pad for HTN-508
• Made in the USA

Replacement ProFinisher 6" pad

PSA

Replacement ProFinisher 6" pad

Hook and Loop

• Traps moisture, rust, scale and oil aerosols that pass through conventional filters
• Removes any impur... 

Use the Panel Crimper to patch sheet metal by creating a 'step' around the area you are looking to repair. The patch sits in the indent of the step, flush with the original surface. This panel crimper has a handle to enable quick, safe, ... 

The Wivco Shake-N-Break Air Impact Screw Remover is an air impact screw and fastener removal tool that makes use of changeable and standard 5/16" hex bits to fit any or all fasteners and screws that are used today. The screw remover can ... 

• Use with compressors, regulators, air lines, pneumatic tools, equipment, and steam applications if less than 120 degrees Fahrenheit
• 1/8" male national pipe thread
• Pressure range of 0 to 160 PSI
... 

• Full swivel chuck
• Includes a 15 inch hose
• Pressure range of 10 to 160 pounds per square inch in 2 pound increments
• Pressure range of 80-840 kilopascal
• Made of heavy duty constructi... 

Eliminates static and cuts the time it takes to prep surfaces by 50%

Install the Ionix Static Eliminator in a compressed air line blowing onto the surface or into spaces from ... 

• Securely holds .401" Parker shank chisels on IR 121, 132 & 772, Air Hammers.
• Safe to use, fast to change chisels.
• Just pull back collar to install and remove chisel.
• Retainer becomes... 

• Securely holds .401" Parker shank chisels.
• Fits most popular air hammers (For IR 121, 132 & 772, use Cat. No. 94450).
• Safe to use, fast to change chisels - just pull back collar to install or remove... 

• 3" long scroll  blade has 18 teeth per inch
• For fine cutting of material over 1/8" thick
• Use to cut through a variety of metals, fiberglass and plastic
• Bi-metal blades contain cobal... 

Quick-change retainer threaded to fit a variety of Pneumatic Hammer models. Retainer features a positive lock sliding collar to prevent the chisel from separating from the hammer. Designed for use with "turn" or "non-turn" type shanks. R... 

• 4" Length
• 1/2" x 5/16" hex driver
• Lifetime Warranty

10 Pc. General Service Chisel Set

• Shank Size: .401
• Molded tray included

• Rivet cutt... 

• .401 "turn-type" shank
• 7" long
• Designed for a specific job or application
• Made from the highest quality steel finished with a black oxide coating for exceptional quality and durability
... 

• General Service Impact Chisel Set €" .401
• 1" Diameter Hammer

7" Long

.401 Shank

• 3/4" Flat Chisel
• 18" Long
• .401 Shank

• Lays flat, no memory
• Superior bend radius
• Kink resistant under pressure
• Extreme all-weather flexibility, even in sub-zero temperatures! (-40° to 150° F)
• Maximum working pre... 

Extreme All Weather Flexibility, Even in Subzero Temperatures

• Lays flat, has no memory
• Doesn't kink under pressure
• Superior bend radius
• Quick-connect plug and coupler syst... 

Eraser Wheel has serrations for improved cooling effect air flow.

• Diameter: 4"
• Width: 1-1/4"

Stainless steel wire bristles for removing sealants

• Diameter: 4"
• Width: 1/2"

Stainless steel wire bristles for removing sealants

• Diameter: 4"
• Width: 3/4"

Hold up to five pneumatic tools in a 10" space.

Comes with five slots that fit all popular quick connect fittings from Milton, Lincoln, Amflo and others. Can be mounted on a tool box, cart or wall for easy access.... 

• .401 shank attaches to air hammer to provide vibration while removing frozen fasteners
• Weight: 0.33
• Width: 0.875
• Length: 4.750
• ... 

• Pneumatic punches, chisels, and hammers are used with a pneumatic tool.
• Many options are available including standard and heavy- duty shanks.
• They are coated with a black oxide finish for rust protectio... 

• These hammers were designed for long reach for those difficult to access applications
• They all have a .401 parker shank and are made from the highest quality S2 tool steel
• Each are heat treated for long l... 

• Uniquely different 35' PVC air hose that prevents static build-up without the need of a static wire.
• Crimped ends with high flow fittings; brass end fittings ¼" male NPT with one swivel connection for greater... 

• 18, 24 & 32 teeth per inch
• Works with 3587, 3400, 3700 & 3715
• 5 blades per pack

• Provides 3 way swivel action for tangle-free operations of air hose with all air tools
• Capacity: 160psi
• Overall Length: 2" (50mm)
• Net Weight: 1/4 lb. (.11kg)
• Air Inlet NPT: 1/4"
• Air Out... 

• Includes 5 bi-metal multi-purpose saw blades per pack
• Vinyl pouch included for easy blade storage
• Blade replacement is quick and easy
• Cuts through pipe, mild steel, aluminum, plastic and fiber glass
... 

• Provides fine air control for spray guns and air tools
• Swivel top allows for easy installation
• Fits any spray gun or air tool
• Air inlet NPT: 1/4"
• Air Outlet NPT: 1/4"

... 

• Skin a door in less than 10 minutes.
• Fits all standard air hammers.
• Self lubricating reinforced nylon head.

Replacement head for AI Skin Zipper2(21896)

The first tool on the market for aluminum repair that can actually bend and put a rope hem around the door. Currently other tools can only bend the aluminum and then you must hammer and dolly the entire door to complete the crimp. The re... 

Allows you to hem the aluminum door window flange opening with minimal arm fatigue.

(The smaller area of the window flange on the F150 will not allow the tip of the Aluminum Skin Zipper to fit, note inverted V shape.)

Now you can put your Flamethrower to work for you on the Inside of the car too. That's right you use the same light you used on your polisher! This bracket and Quick Connection hub, securely mount the Light and Flamethrower ll arm to any... 

Now you can put your Flamethrower to work for you on the Inside of the car too. That's right the same Light! This bracket securely mounts the Light and Arm to any 1" (25mm) to 1.3" (33mm) round tube such as an small extractor nozzle hand... 

Complete quick disconnect hub for the Flamethrower ll system. Includes the hub, the spacer, the star lock washer and the 8 mm to 10 mm bushing for 10mm polishers such as Adams, DeWalt and Milwaukee. Also includes hub bumper cap.

Get more mileage out of our durable M-2 high-speed steel bits. Their shortened length keeps them from slamming into the inside layer of sheet metal, so they resist breakage.

1/8" Drill Bit

(Qty 1=50) ... 

• 3" Non-Marring Blade and Steel Air Hammer Arbor to remove Bodyside Moldings
  
• Includes Additional Wedge

Leave the dust behind. When it comes to efficient sanding, dust is the enemy. Keep your substrates and workplace clean with 3M Xtract™ Filter Bags. Combined with 3M Xtract™ Net Discs and 3M Xtract™ Random Orbital Sander... 

Rapidair Aluminum Pneumatic Compressed Air Distribution Manifold Blocks

• 6061 Aluminum Construction
• NPT Ports
• 200 psi rated