FREE Shipping*
Within the 48 Contiguous United States*
The BendPak Elite™ Air Compressor, 5 HP, 80-Gallon Vertical Tank, 60 Hz, 1-Phase - TS-580V-601 delivers proven longevity in the most demanding conditions. This unit runs at a slower RPM than most comparable units and they're quieter, run cooler and cost less to operate. They are built with 100% cast-iron pumps that provide the quality and performance needed for heavy-duty applications.
This air compressor is powered by a 5 horsepower energy-efficient motor. Dual drive belts require less tensions for reduced load on bearings and longer belt life. The belts are fully-enclosed in belt guard. The 80 gallon vertical tank is ASME rated. The ASME rated safety valve protects the compressor from overpressure and safeguards the operator. Corrosion resistant tubing for coolers, separators and valves for longer life and reduced maintenance. Integrated pressure unloader valves are built into the intake valve assembly on the compressor head reducing internal pump heat from initial start-up compression.
Key Features of the BendPak Elite™ Air Compressor, 5 HP, 80-Gallon Vertical Tank, 60 Hz, 1-Phase - TS-580V-601:
- Extra-quiet, low-RPM pump
- 5 HP energy-efficient motor
- Pressure switch controlled ensures efficient operation at all times with no wasted energy
- Cast-iron pump and heads are more stable under heavy workloads
- Cast-iron Elite pump features simple splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling
- Dual drive belts located in a fully-enclosed belt guard
- ASME rated tank
- Large surface area and cooling fins on cylinders and forced-air aftercooler provides efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced
- Precision honed cylinders increase efficiency and oil control
- Oversized ductile iron crankshaft provides extra strength and longer wear
- Tapered roller main bearings provide full contact and support of the crankshaft and needle-type piston pin bearings properly distribute bearing loads
- Precision balanced flywheel has forced-air fan blades for optimum compressor cooling and life
- Magnetic starter provides thermal overload protection and minimizes start loads providing long life and trouble-free operation
- Balanced flywheel and counterbalanced crankshaft provides vibration-free operation
- Readily accessible disc-valves do not require disassembly of compressor piping for easy accessibility and reduced maintenance cost and downtime
- High-density, die-cast aluminum alloy rods minimize reciprocating weight
- Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
- Automatic pressure switch provides auto start and stop
- Pressure gauge with service valve
- Oversize replaceable air filter
Technical Specifications
- Tank: 80 gallons / 300 L / Vertical Tank
- Voltage: 208 - 230 V
- Horsepower: 5 Hp
- Phase: 1 Ph
- Hertz: 60 Hz
- Running Load Amps (SFA): 26-23.8A
- Peak Start-up Amps: 54-48A
- Recommended Breaker: 30A
- Noise level: 75 dB
- Pump Style: 2-Stage/2-Piston/Vertical
- Pump RPM: 625 rpm
- Motor RPM: 1740rpm
- Lubrication: splash / oil
- Cubic feet per minute @ 90 psi: 17.9 CFM
- Cubic feet per minute @ max psi: 17.2 CFM
- Max psi: 175 psi
- Shipping weight: 619 lbs. / 281 kg
- Shipping dimensions: 39" x 26" x 79" / 991 mm x 660 mm x 2006 mm
*Ships by truck freight. Forklift required at time of delivery,If no Forklift is available you can request a liftgate for an additional charge.
$100 Limited Access Fee for deliveries to schools. Additional $80 charge for residential delivery.
