3M™ Performance Spray Gun Ball Valve is an accessory for the 3M™ Performance Spray Gun System configured as a pressure feed sprayer. The valve gives the spray gun operator the ability to stop the flow of paint from the pressure source (pot or pump) at the spray gun end of the supply hose. Recommended for use when the painter does not have easy access to the pressure source. Light and easy to use.
- Ball valve lets the painter stop fluid flow to spray gun
- Attaches between whip hose and supply hose in a pressure feed configuration
- Seals are compatible with both solvent-based and waterborne coatings
- Allows for spray gun removal or nozzle replacement without disabling the pressure source
Technical Specifications
- Air Consumption: 13 scfm / 368.12 L/min
- Nozzle Diameter: 1.25 in / 33 mm
- Operating Pressure: 145 psi
