3M Acryl-Green Spot Putty, 14.5 oz tube - 05096

SKU #1703658
• Fills pinholes, scratches, chips and more
• Spreads smoothly
• Low shrinkage
• 1.5 Minute work time
Price:
$29.95
  • Description
  • Reviews
  • Tech Sheets

Looking for the perfect product for spot repairs, pinholes, stone chips, and surface imperfections? Try the 3M Acryl-Green Spot Putty 14.5 oz tube. This fast-drying formula is perfect for such projects. It has a smooth texture and is easy to spread on the affected areas.

Since it is easy to use, work time is typically 1.5 minutes. When applied in a thickness of 1/16" or less, with an ideal room temperature of 72ºF, the putty will dry within 25 minutes. Since it dries quickly, it can be sanded within 10 to 15 minutes. 3M Acryl-Green Spot Putty, 14.5 oz Tube works best over primer or polyester body fillers and can also be used on clean and sanded painted surfaces.

Special Features of 3M Acryl-Green Spot Putty, 14.5 oz Tube

  • Perfect for spot repairs, pinholes, stone chips, surface imperfections
  • Green colored product, available in a 14.5 oz. tube
  • Fast-drying formula for quick completion of projects
  • Smooth texture makes it easy to spread
  • When applied at a thickness of 1/16”, it will dry within 25 minutes, ideally at a room temperature of 72ºF
  • Works over primer, polyester, clean, and sanded painted surfaces

Directions for Use:

  • Do not apply when ambient temperatures are below 55°F or above 110°F. Use in a well ventilated area away from sparks or open flame. (Do not apply material below the water line unless top coating.)
  • For best results apply only over clean primed surfaces. (Use compressed air to remove any dust contamination).
  • Apply using a plastic or metal spreader pressing the putty firmly into the imperfections; keep the application thickness to 1/16" or less. Apply in thin coats instead of one thick application.
  • Allow to dry prior to sanding. Sand (wet or dry) using 3M™ abrasives in the following sequence: P180, P220, P320. Note: As with any putty, longer drying times will occur with high humidity, thick applications and low temperatures.
  • Re-clean surface prior to priming or top coating. (Follow paint manufacturer's recommendation for priming and top coating).

Documents

PDF Safety Data Sheet

PDF Technical Data Sheet


PROP65 Warn  ing WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warning.ca.gov.

Close

By using this website, you agree to our use of cookies to analyze website traffic and improve your experience on our website. Learn More