Before assembling your Variable Height Catwalk please check that you have the following parts,

            1 – Base 82” x 14”                                                    1 – 5/16” Star Knob

            4 – 5/16” x 1 ¾” Bolts                                               2 – Standard 24” Legs

                                                                                              10 – 1” x 1” End Plugs

To assemble your 7’ Folding Catwalk, simply follow these instructions.  If further assistance is needed, please call and we’ll be glad to help.  

1. Unpack all pieces; lay out in an orderly fashion.  Check to make sure that all parts are present.
   
   
2.  Start with the base by flipping it over so the mesh is touching the floor.
   
   
3. To install legs, start by selecting which holes you would like to use.  If you will be placing two
   7’ Folding Catwalks next to each other, you will want to recess one set of legs so they can butt up against one another.  After selecting the holes use the wire locks to install the legs.
   
   
4. Insert center support brace, tighten knob.
   

Your 7’ Folding Catwalk is now complete and ready to provide you with years of trouble free use.  Although every precaution has been taken to provide you with a quality piece of equipment, it is still necessary for you to be careful and to use common sense when using this product.  Make sure that the 7’ Folding Catwalk is set up on a level surface, that the legs are fully extended, and that the overall unit is stable before ascending.  During use be sure to be aware of where you are in relation to the edge of the unit.  When you are ready to descend, be careful of your footing.  

Thank you for choosing the 7’ Folding Catwalk and look for other items manufactured by Auto Body Tool Mart.  Please note that there are 36” legs available for this Catwalk.  

Auto Body Tool Mart is not responsible for accidents and/or damage due to the misuse of this product.